How many checks are on the cash register. What is an offset paper receipt? There are several types of check tape

There are several modifications check tape.

Single layer receipt tape- consists of one layer of offset paper.

Multi-layer or double-layer receipt tape- consists of one layer of offset paper and the second self-copying layer. It is divided into a receipt tape with two active layers, which consists of two self-copying layers, and a receipt tape with one self-copying active layer.

thermal tape(or thermochemical receipt tape) - consists of a single layer of thermal paper, the image on which appears under the influence of temperature.

Single layer receipt tape

There are 6 sizes of receipt tape in width - 37, 40, 44, 57, 69 and 76 mm. Receipt rolls of the same width differ in outer diameters, which can be from 54 to 70 mm, inner diameters of the sleeve - 12 or 18 mm. In each model of the cash register, a check tape of a strictly defined width and a certain diameter can be used to fit in the space allotted for it. The diameter of the sleeve is also important - only Samsung POS printers can use rollers with a sleeve of 12 and 18 mm, as they have a conical pin for the roller.

A prerequisite is the application of a colored (usually red) stripe on the last 5 meters of the receipt tape. The appearance of a receipt tape with such a strip at the exit from the cash register shows that the receipt tape will soon run out and it is time to change the roller.

For the manufacture of a single-layer receipt tape and the top layer of a two-layer receipt tape, both offset paper with surface sizing and a whiteness of 96-100%, and writing paper with a whiteness of 92-94% of domestic production are used.

Multilayer, it is also a two-layer check tape

A multi-layer check tape consists of two layers, the image on which is applied by one printing unit of the CMC. The top layer of the check tape is received by the buyer, while the bottom layer remains in the cash register. The top layer is made of high quality offset paper, and the bottom layer is made of special paper with a self-copying layer. A check tape is produced with a width of 44, 57 and 76, less often 69 mm and an outer diameter of the roller from 54 to 70 mm. The sleeve is used only one inner diameter - 12 mm.

A multi-layer receipt tape with one active layer is used in cash registers without a cartridge, in the same cases as a double-active receipt tape. It is used on Samsung cash registers, since it is often cheaper to work on a single-action receipt tape than to buy expensive cartridges that are of poor quality.

thermal tape, she is thermochemical receipt tape

This receipt tape consists of a single layer of paper coated with a thermosetting coating. The paper used is the same as for production fax rollers. The width of the check tape is mainly 44 and 57 mm, but there are rollers with a width of 80 mm. The density of the paper base is from 55 to 58 g / m2, and sometimes there are manufacturers who wind rollers from thermal paper of a higher density, which makes the rollers visually look larger with the same or even less length of the receipt tape.

The check tape is different:

by the number of layers
printing method,
width
roller outer diameter (or belt length)
bushing inner diameter.

The type of RECEIPT TAPE is indicated in the technical documentation for cash register equipment.

In order for you to be helped to choose a RECEIPT TAPE, you need to know the full brand of the CCP, and also whether any of its upgrades were made in the CTO.

If the printing unit has been replaced, it is possible that the receipt tape standard for this POS printer model will not work. In this case, you should seek advice from the TsTO, in which the KKM was repaired. The easiest and most reliable way is to measure the width, inner and outer diameters of the check tape roller already used in cash registers and remember this type.

Usually, the standard size of a receipt tape is indicated as follows: “width” x “inner sleeve diameter” x “roller diameter” - for example 57 x1 2 x 60, all dimensions in mm.

There are several modifications of the check tape, below we will consider the most common ones.

thermal tape(or thermochemical receipt tape) - consists of a single layer of thermal paper, the image on which appears under the influence of temperature, on this moment perhaps the most common. This receipt tape consists of a single layer of paper coated with a thermosetting coating. The paper used is the same as for the production of fax rollers. The width of such a check tape is from 40 to 80 mm. The most commonly used rollers are 40, 44, 57, 80 mm wide. The winding length of such rollers can be different: from 20 to 500 m and sometimes even up to 900 m. Rollers of large windings are used mainly in payment terminals and ATMs. The density of the paper base is from 55 to 58 g/m. sq. Sometimes there are unscrupulous manufacturers who, for the sake of their own profit, wind rollers from thermal paper of lower density, which is why consumers have inexplicable, at first glance, problems when operating thermal printers as part of cash registers, terminals and ATMs.

single layer check tape (or offset) - consists of one layer of offset paper. There are 6 sizes of receipt tape in width - 37, 40, 44, 57, 69 and 76 mm. Receipt rolls of the same width differ in outer diameters, which can be from 54 to 70 mm, inner diameters of the sleeve - 12 or 18 mm. In each model of the cash register, a check tape of a strictly defined width and a certain diameter can be used to fit in the space allotted for it. The diameter of the sleeve is also important - only Samsung POS printers can use rollers with a sleeve of 12 and 18 mm, as they have a conical pin for the roller. A prerequisite is the application of a colored (usually red) stripe on the last 5 meters of the receipt tape. The appearance of a receipt tape with such a strip at the exit from the cash register shows that the receipt tape will soon run out and it is time to change the roller. For the manufacture of a single-layer receipt tape and the top layer of a two-layer receipt tape, both offset paper with surface sizing and a whiteness of 96-100%, and writing (newsprint) paper with a whiteness of 92-94% of domestic production are used.

multilayer or two-layer check tape - consists of one layer of offset paper and the second self-copying layer. It is divided into a receipt tape with two active layers, which consists of two self-copying layers, and a receipt tape with one self-copying active layer.

On a multi-layer receipt tape, consisting of two layers, the image is applied by one CCP printing unit. The top layer of the check tape is received by the buyer, while the bottom layer remains in the cash register.

The top layer is made of high quality offset paper, and the bottom layer is made of special paper with a self-copying layer. A check tape is produced with a width of 44, 57 and 76, less often 69 mm and an outer diameter of the roller from 54 to 70 mm. The sleeve is used only one inner diameter - 12 mm.

Multi-layer check tape with two active layers consists of two layers of paper with a self-copying coating. Such a receipt tape is used in cash registers without a cartridge, it is often used when the cash register is operating at low temperatures, when the ink of the cartridges freezes, or if replacing the cartridge is more expensive than using a dual-active tape. The receipt tape is produced in widths of 44, 57 and 76 mm. A multi-layer receipt tape with one active layer is used in cash registers without a cartridge, in the same cases as a double-active receipt tape. Often they are used on Samsung cash registers, since it is often cheaper to work on a single-action receipt tape than to buy expensive cartridges that are of poor quality.

Receipt tape correspondence table for CCP models and thermal printers

Type of CCP (thermal printer)	Type of check tape
Thermal printers of payment machines and ATMs	Thermal tape. Width 57 or 80 mm, bushing diameter 12, 18 or 26 mm and roller diameter from 80 to 250 mm. Here, a lot depends not so much on the printer model, but on the design features of payment acceptance machines and ATMs.
AMS 101 , ASTRA 200F, KASBI 02K, KASBI 02K, KASBI 02F, KASBI 03F, LADOGA-K, MICRO 103K, MICRO 103F, MICRO 104K, MICRO 104F, MINIKA 1101F, MINIKA 1102F, MINIKA 11 03F, NEVA 110F, OKA-102K, OKA 600K, FELIX-02K, EKR 2102K, EKR 2102F, EKR 3102K	44 - thermo
AMS 100K, AMS 100F, AMS 110K, AMS 202F, MERCURY 112.1F, MERCURY 115, MERCURY 130, MINICA 1103F, Orion 100K, RESOLA F, PRIM-21K, SPARK-617TK, SPARK-700TK, Felix RK, ShTR IH-MINI C, DASH-FR-C, ELVES MICRO-C, ELVES-FR-C, EKR 2102K, EKR 3102K, EKR 3102F	57 - thermo
Aura-2, MEBIUS-2K, Mercury MS-K, MiniMax-MK, PRIM-08TK, PRIM-09TK, PRIM-60TK, PRIM-88TK, SPARK-700TK, SP101FR-K, Felix3SK, SHTRIH-COMBO-FR-K , Barcode-Mini FR-K, BEETLE-K, BEETLE-20K, BEETLEPOS-K, NCR, OMRON, POSprint FP410K	80 - thermo
Mercury 111F, MICRO 105F, Oka A100F, Oka 400F, Oka 500F, OKA 600K, Oka 2000F, Oka 2500F, EKR 3101.1F, EKR 3102F	40 - offset
Oka auto, EKR-2102F, EKR-3102.3F, Samsung ER-4615 RF, Sam4s ER-4615 RK, OMRON (two-station)	44 - offset
AZIMUT-EPSON TM-U950 RK, Mercury 111F, Mercury 112F, Mercury 114F, Mercury 115F, Mercury 120F, MICRO 103F, MICRO 104F, EKR 2102F, Samsung ER-250 RK, SHARP ER-A250RK	57 - offset
Receipt tape correspondence table for CCP models and thermal printers

Cash tape from the manufacturer

Cash or check tape - an invariable attribute modern business. Any a store, a firm or company associated with the sale of goods or services, uses this consumable in its activities.

Scope of application of ribbon for cash printer

This product serves as the basis for printing checks and reporting forms using terminals and cash registers. On a strip of paper, information is printed on transactions performed within the company, which can subsequently be used by internal and external reporting. When a consumer expresses a desire to buy a product or service and pays for it, in any store, mall, a public catering facility, the sale, or rather its fact, is confirmed by the seal of the receipt. Depending on the model of the cash register, you can use a check tape of a specific width, winding length, with a certain number of layers. Data on the necessary consumables for a particular device is always indicated in the equipment passport.

Types and types

Today, you can buy wholesale and retail several varieties of receipt tape: single- and multi-layer versions, paper with a thermal layer are widely used. Each material variant is designed for certain aggregates, a specific type of printing, so the prices of ribbon paper may vary. In a certain cash register, a coil of a specific size can be installed, so the marking of products is carried out depending on the width of the roll, for example, 44, 57 or 69 mm.

What is the difference between cash register tape and terminal material?

1. A single-layer tape is used for printing non-fiscal checks and checks for internal reporting. This roll material is made from offset paper with a whiteness of at least 98% and writing paper with a whiteness of 92% or more. The main requirement for it is high-quality and fast absorption of paint.

2. A cash register tape with several layers is used to copy information about trading operation. The first layer of paper with printed data remains in the cash register for reporting, the other layer is given to the buyer as a check.

3. Special options for offset paper products are designed to work with special inks or thermal ribbon. They develop characters such as batch number, price, date of printing under the influence of a certain temperature. Such consumables are used for bank terminals, in some self-service stores. It has a special coating, due to which it darkens when interacting with a hot printed element of the equipment.

You can order any type of tape for check machines and terminals from us - the catalog contains one- and two-layer products of popular types and sizes. You can buy wholesale products of any size and width at a bargain price.

Our company is a manufacturer, therefore it offers the best prices in the region and the possibility of supplying wholesale supplies for cash registers, terminals and other printing equipment.

Most cash registers a thermal printer is installed and the most common receipt tape is used - thermal tape.

Receipt thermal tape is thick paper with a thermochemical layer that darkens when heated by the printer's thermal head, resulting in a programmed black and white image on the receipt. Thermal printing is the most economical way to receive checks, so most cash registers, POS terminals, fiscal registrars, ATMs, payment terminals use this type of printing.

Advantages of thermal printing:

there are no costs for the purchase of an ink ribbon;
checks are printed on a thermal printer at high speed.

The main criteria for choosing a receipt thermal tape:

width - from 37 mm to 80 mm, the most common size is 57 and 80 mm;
tape roll core diameter - 12 mm, 18 mm, 26 mm;
tape roll diameter - from 25 to 250 mm;
paper weight - from 48 to 55 g/sq.m.

Your printer manual lists the core sizes and ribbon roll diameters that it uses. You should purchase consumables for receipt printers in accordance with the technical recommendations of your equipment.

check tape

For printing checks and receipts for accepting payments in banks and wholesale trade organizations dot matrix printers are often used. In the process of dot matrix printing, the printer head impacts the image on the check through an ink ribbon, which is packed in a cartridge. The image is made up of many dots.

The dot matrix printer uses a classic offset receipt ribbon. The main criteria for choosing a receipt offset ribbon:

width - from 37 mm to 76 mm;
tape roll core diameter - 12 mm, 18 mm;
tape roll diameter - from 54 to 83 mm;
paper density - from 48 to 80 g/sq.m;
number of layers.

Advantages of dot matrix printing:

offset receipt ribbon - a cheaper consumable compared to thermal tape;
the print quality on a matrix printer check is more resistant to external influences than on a thermal check;
ink ribbon for dot matrix receipt printers can be two-color, which favorably distinguishes dot matrix printing from thermal printing;
dot-matrix printers print "carbon paper" self-copying sales receipts on a two-layer or multi-layer receipt tape. A multilayer tape consists of two or more layers of paper, the top layer is ordinary offset paper, the lower layers are covered with ink microgranules, which, when hit by the printer's print head, produce a copy of the check, the top check is received by the client, the copies remain in the trade organization.

In our online store you can purchase both offset receipt tape and thermal receipt tape in different sizes.

price label sells quality cash register tape for cash registers and receipt tapes for payment terminals, ATMs, cash desks, receipt printers wholesale and retail.
And also carries out under the order printing of advertising on a receipt tape with a minimum circulation of 2000 commercials. Cash receipt tape from 48gr to 125gr.

We would like to warn you that almost all cash register tape on the market is sold with underwinding (there is less winding in the video). But that doesn't mean you're overreacting. The price corresponds to the number of meters of winding.

Types of check tape:

Tape name	Qty per pack
376012 thermo
443012 (19m) thermo	300
443012 (27m) thermo	240
444012 (39m) thermo	165
446012 thermo
573012 (19m) thermo	240
573012 (27m) thermo	192
574012 (39m) thermo	132
696012 (39m) thermo
766012 thermo
808012 (58m) thermo	72
808012 (68m) thermo	54
808012 (80m) thermo	45
8015012/18/26 (310m) thermo	8
8018012/18/26 (445m) thermo	5

The length of the winding of the rollers can be any - under the order!

Thermal tape (thermochemical receipt tape)

Thermal tape is a single-layer check tape with a thermo-active coating, the width of which is most often 57-80 mm, and in some cases 44 mm. Also, the thermal tape can have a different density of the paper base - from 48 to 55 g/m2.

Tape for cash registers is one of the most popular consumables. none cash register does not do without such consumables as a check tape, on which the work of the entire store depends. For this reason, it is very important to buy a cash register tape in a timely manner.

On a check tape of this type, the image is formed due to the effect of temperature on a heat-sensitive coating. In order for the printing device to warn the operator in time about the need to replace the roller, a red stripe is applied to the last 1.5 meters of thermal tape.

Types of check tape for cash registers, ATMs, acquiring:

single layer;
two-layer;
thermal tape;
offset ribbon.
Rollers for queue management systems (coupons)

The order of prices for a check tape without printing:

Cash tape (offset) from 5.30 rubles.
Cash tape (thermo) width 80 from 55.72 r
Tape cash (thermo) width 57 from 15.26 rubles.
Cash tape (thermo), art.76x30, item 108 from 45.91 rubles
Cash tape, 76 offset Tue.12 st.70 from 15.30 p.
Cash tape (thermo) width 44 from 15.96 rubles.

Single layer receipt tape

A single-layer check tape is produced in various widths: 37, 40, 44, 57, 69, 76 mm. Receipt rolls can also vary in core inner diameter (12mm and 18mm) and outer diameter (from 54 to 70mm).

It should be borne in mind that the width and diameter of the cash register are selected strictly according to the technical parameters of each specific model of the cash register. A red stripe is applied to the last 5 meters of the receipt tape so that the printer can prematurely notify the cash desk employee of its end.

Multilayer (two-layer) check tape

A multi-layer check tape differs from all other types of cash tapes in that it has two layers at once. Hence its name. The bottom layer of the tape is made of self-copying paper. Therefore, when information is applied to the top layer, it is duplicated on the bottom. The upper part of the tape is given to the buyer, while the lower part remains in the cash register. The multilayer cash tape in our company site is made in widths of 44, 55, 57, 69, 76, 80 mm and diameters from 54 to 70 mm. The inner diameter of the sleeve is available in only one version - 12 mm.

You can order a multi-layer check tape with one or two active layers from us. We sell white and colored check tape with printing.

Thermal paper tapes are used:

at cash registers (cash registers)
at ATMs
acquiring (printing a tape when paying with a bank card)
at payment terminals
parking machines
for queue management systems.

Check tape for ATMs

ATMs use a check tape with a large winding on the sleeve. At cash service, at the end of each cash transaction, the ATM issues a check to the client with all the necessary information about the payment. ATM check tape can be of different length, size and quality.

Printing advertising on a receipt tape on the reverse side from 2000 rubles

It is also possible in our company. back side cash tape will be used as a platform for placing the bank logo, emblem or any kind of advertising. The check tape for an ATM can be colored. Moreover, it allows applying a color image up to 4 colors. Printing a brand advertisement on a check tape allows you to attract the attention of a client, becomes a distinctive attribute of a particular bank and encourages potential customers to use its services. The advertising video is stored without sun and moisture in boxes for up to 2 years!

Depends on the quality of the check tape technical condition ATM as a whole, as well as the printing device installed in it. If the tape is made of good quality paper, it will provide a longer service life of the ATM. The printing of advertising on the check tape on the reverse side is available as an additional service.

Typical sizes of thermal tape:

Receipt tape 37 x 60 mm
Receipt tape 44 x 60 mm
Receipt tape 44 x 30 mm thermo
Receipt tape 44 x 40 mm thermo
Receipt tape 55 x 80 mm thermo
Receipt tape 57 x 30 mm thermo
Receipt tape 57 x 40 mm thermo
Receipt tape 57 x 80 mm thermo
Receipt tape 57 x 150 mm thermo
Receipt tape 69 x 60 mm
Check tapes 76 x 60 mm
Receipt tape 80 x 60 mm thermo
Receipt tape 80 x 80 mm thermo
Receipt tape 80 x 120 mm thermo
Receipt tape 80 x 150 mm thermo
Receipt tape 80 x 180 mm thermo
Receipt tape width 80mm winding 120m with sleeve size 25mm
Receipt tape with full color printing with roller size 80*12*80

Receipt tape for acquiring (verifone, ingenico)

Thermal tapes are universal and suitable for PinPads: verifone vx520, vx510, vx670, vx675, vx680, vx820, Ingenico ICT220, Ingenico IWL220 and other models. The main thing is to choose the tape according to the size and it is especially important for such devices that small windings (tape length) are required.

Ticket rollers for queue management systems

We sell check rollers in rolls of 1000, 2000 and 3000 checks, which are consumables for Q-matic queue management systems, etc.

We accept orders for thermal videos for the electronic queue (coupons on thermal tape), for various types of parking machines, bank terminals.

The special thermal rollers for the electronic queue have the necessary black marks for the photo sensor of the printing system, as well as transverse perforation of coupons for easy tearing, and even winding of the tape on the sleeve. Our Price Label company can offer thermal paper coupon tape at market prices. It is possible to order the production of rollers from thermal paper with a density of both standard 55 g/m.2 and thick coupons 70 g/m.2.

Also, in systems with an auto-cutter, you can use a conventional thermal tape with a large winding.

Dimensions of thermal paper for electronic queue:

60x100x25 Q-matic
57x100x25
57x100x12
60x100x25
60x100x12 thermo
80x80x25
60x80x25
82.5x150x25
82.5x120x25

Thermal paper rolls for ATMs and payment terminals

The standard roller width is 80mm, and the winding diameter can be from 80 to 250mm, the standard sleeve diameters are 18mm or 25mm. It is possible to print advertising on the reverse side of the receipt tape.

Dimensions of rollers for ATMs and terminals:

80x120x12
80x120x25
80x130x18 thermo inside
80x140x25
80x150x12
80x150x25
80x180x12
80x180x18
80x180x25
80х200х18 Top sales
80x200x25
80x210x18 thermal layer inside

		Models of devices for which tapes are suitable
thermal tape		KASBY 02K, LADOGA-K, OKA-102K, OKA 600K, FELIX-02K, EKR 2102K, EKR 2102F, EKR 3102K, atol 30f, atol 90 f
thermal tape		AMS 100K, AMS 110K, MERCURY 115, MERCURY 130, MINICA 1103F, Orion 100K, PRIM-21K, SPARK-617TK, SPARK-700TK, Felix RK, SHTRIH-MINI-K, SHTRIH-FR-K, ELVES MICRO-K, ELVES-FR-C, EKR 2102K, EKR 3102K, Verifone VX520, ATOL 11F
thermal tape		MEBIUS-2K, Mercury MS-K, MiniMax-MK, PRIM-08TK, PRIM-09TK, PRIM-60TK, PRIM-88TK, SPARK-700TK, SP101FR-K, Felix3SK, SHTRIH-COMBO-FR-K, Shtrih-Mini FR-K, BEETLE-K, BEETLE-20K, BEETLEPOS-K, NCR, OMRON, POSprint FP410K
two-layer
two-layer		Samsung ER-250 RF (with cartridge), EKR 2102.K, ELVES MINI, NCR RealPOS Tiger FIT-K, SHARP 250F
two-layer		ACCORD KF
two-layer		Stroke-950, M-Star
single layer capillary		2102K, 3102K, Samsung ER-4615 RF, Sam4s ER-4615 RK
single layer capillary		Mercury 112Ф, Samsung ER-250 (without cartridge)
two-layer capillary		EKR 2102K, EKR 3102K
two-layer capillary		Samsung ER-250 (without cartridge), SHARP 250F
single layer		Oka 2000, ELECTRON NCR, EKR 3102, ELVES 01
single layer		Mercury 111F, MICRO 105F, Oka A100F, Oka 400F, Oka 500F, OKA 600K, Oka 2000F, Oka 2500F, EKR 3101.1F, EKR 3102F
single layer		Oka auto, EKR-2102F, EKR-3102.3F, Samsung ER-4615 RF, Sam4s ER-4615 RK, OMRON (two-station
single layer		Mercury 112F, Mercury 114F, Mercury 115F, Mercury 120F, MICRO 103F, MICRO 104F, EKR 2102F, Samsung ER-250 RK, SHARP ER-A250RK
single layer		EPSON TM-U950 R, GARANT-K, MEBIUS-8K, MiniMax-MK, PRIM-07K, SHTRIH-950K, EKR-2102, OMRON (three-station), BEETLE-K, BEETLE-20K, BEETLEPOS-K, IBM SureOne- K, IBM SurePOS-BK, IBM SurePOS-K, IBM SurePOS-SK, GEG POS MASTER
single layer		MEBIUS-7K, BEETLE-K, BEETLE-20K, BEETLEPOS-K, IBM SureOne-K, IBM SurePOS-BK, IBM SurePOS-K, IBM SurePOS-SK, GEG POS MASTER, M-Star

How to choose the right cash register size

The type of cash tape that is suitable for your equipment should be indicated in the technical documents attached to the cash register, fiscal registrar or receipt printer.

Very often, receipt tape manufacturers do not wind the roll on the roller and sell a shorter length. From here they can give more low price. Honest check tape from 12 rubles / 30m. - In stock and on order.

ON A NOTE:

thermal tape 57 mm wide is the most common in Russia and is used on 80% of all autonomous cash registers.
some cash registers, such as for example Mercury 180 will not fit a roll wider than 45 mm.
Cash thermal tape 57 mm wide is used on KKM: Mercury 115, Mercury 130, Mercury 180, AMC 100, Elves-Micro.
Receipt tape made of thermal paper 57*30*12 winding 30m or winding 19m is suitable for ATOL 11F cash register

Tape name	Qty per pack
376012 thermo
443012 (19m) thermo	300
443012 (27m) thermo	240
444012 (39m) thermo	165
446012 thermo
573012 (19m) thermo	240
573012 (27m) thermo	192
574012 (39m) thermo	132
696012 (39m) thermo
766012 thermo
808012 (58m) thermo	72
808012 (68m) thermo	54
808012 (80m) thermo	45
8015012/18/26 (310m) thermo	8
8018012/18/26 (445m) thermo	5