We give a fur product a second life - we learn to dye fur at home. How to dye natural fur How to dye natural fur white

Often a favorite fur coat or vest loses its appearance, while other characteristics are still quite excellent. The villi fade, fade and give the product a very worn look. If you still want to enjoy the warmth and comfort of your favorite thing, then you can shade it a little. But not everyone represents how to dye fox fur at home.

You can not bother with self-painting, but give the product to a special workshop, where everything will be done quickly and professionally. But the cost of such a service is often prohibitive. It will be much cheaper to learn how to dye natural fur and do this work yourself.

Important: Please note that if the product is still new, then it is categorically not recommended to dye it just to change the color, since any dyeing of the fur reduces its service life.

Each type of fur is beautiful and original in its own way. Painting each of them also has its own characteristics:

White rabbit, chinchilla or mink fur is the easiest and easiest to dye, because it does not require pre-lightening. You can use any color that can cover the resulting yellowness.

Tip: Keep in mind that rabbit fur is very sensitive to chemicals, so it must be dyed with extreme care.

Preparation

In order for you to get a very good effect, the fur product must be prepared for painting. Then the paint will lie much more evenly and there will be no bald spots. The most important thing is a good fur coat or vest.

To do this, prepare a mixture of the following substances:

2 tbsp. l. salt;
1 st. l. ammonia;
2 tbsp. l. soda;
1 st. l. washing powder;
2 liters of warm (not hot) water.

All components must be mixed and gently applied to the resulting mass of clothing. Gently brush the villi with a brush so that not only the upper, but also their lower part is cleaned. Moisten then a clean cloth with water and wipe the fur from the composition.

After such cleaning, the thing must be dried naturally, without using either heaters or a hair dryer. It is also not recommended to leave the product in direct sunlight.

How to dye fur yourself

How can fur be dyed? This quite natural question arises for many people who want to change the colors of mink, rabbit or arctic fox fur at home. Of course, there are some very real home coloring technologies.

Professional tool

You can use a special paint for fur, which is sold in hardware stores. It lies very naturally on the villi, as it is designed taking into account the characteristics of animal furs.

Hair dye

A more affordable option is . This is also the most popular coloring method, because you can choose any color from a huge palette.

Important: Keep in mind that fur should always be dyed in a darker shade. Over time, the fiery red color will turn into “rusty” or red, and black will fade to a dirty brown.

So, how to change the color of fur with hair dye:

mix all the paint components according to the instructions.
put on gloves.
treat the mezdra (skin) with baby cream, glycerin or petroleum jelly to avoid drying it out;
moisten the pile so that the paint is distributed more evenly;
apply paint with a brush to the entire fur surface;
remember the fur with your hands a little;
wait 35-45 minutes;
wash off the paint with water;
lay the thing on a horizontal plane, wring out excess moisture with your hands, and leave to dry;
after drying, comb the item.

You can paint the fur not completely, but only the tips of the villi. As a rule, they are lightened to give the product a richer look.

Suede paint

You can treat the faded tips of the villi with suede paint, which is sold in aerosol cans. To do this, place the can at a distance of at least 0.5 meters from the thing and evenly paint the entire surface. Leave the fur to dry for a while, and then rinse it well.

After that, prepare a fixing solution: 5 tbsp. l. vinegar to 2 liters of water. Wipe the pile with this liquid and leave it to dry.

Hydrogen peroxide

If the fur product is already dark, but you would like to dye it in a bright and saturated shade, then you can discolor it. Hydrogen peroxide tablets or hair bleach will help in this matter.

Peroxide is diluted with water in a ratio of 1:3. If you use a clarifier, then dilute it as written in the instructions. Different manufacturers can produce clarifiers of different concentrations. Apply the prepared mixture on the fur and leave for 10-15 minutes. It is impossible to keep the composition on the pile longer, as the hairs can become brittle. After processing, rinse the fur with water and dry naturally. It will be possible to paint it only after complete drying.

When deciding to lighten and dye the fur of a collar, hat or other thing, carefully select the color, because it will be undesirable to carry out these procedures again. Not a single, even the highest quality pile, can withstand repeated staining.

When dyeing fur, it is important to know some of the nuances:

The fur that you decide to dye should not be too shabby.
Only a clean pile will stain well, so it must be preliminarily cleaned.
Yellowed white fox fur can simply be lightened.
Before applying any coloring agent, be sure to test it on an inconspicuous area.
When painting, you can hide some flaws and defects.
Instead of full-fledged paints, sometimes you can use small folk tricks. For example: the fur of a red or steppe fox can be quickly and painlessly updated with a strong solution of potassium permanganate. In this case, use a small sponge. It must be dipped into the solution and carried out through the villi, trying not to touch the core.
After dyeing and drying, the fur must be combed so that it becomes fluffy again.
With the help of tinting shampoo, you can make a unique decor on your fur product. It just takes a little imagination.

Now you know whether it is possible to dye the fur of arctic fox and other fur-bearing animals, and also imagine the technology of this process. The main thing is to strictly follow all the instructions. And your favorite and cozy fur coat will delight you for some time with its warmth and impeccable appearance. If you do not dare to take such a crucial step as dyeing fur, then contact the specialists in dry cleaning or a workshop for repairing fur products.

Any fur product on any girl looks very beautiful and expensive, and you can wear it for more than one year. However, such things have a huge drawback - after a long wear, the villi begin to fade, lose their original appearance. From this article, you will learn how to dye fox fur at home so that you continue to be pleased to flaunt in a warm, beautiful little thing.

Preliminary preparation

Before you start painting a fur product, you need to prepare it, namely, get rid of all the dust and dirt on the villi. Otherwise, after the painting procedure, unpleasant stains and stains may form on the product, which will make it lose its former attractiveness even more.

So, for the procedure for cleaning a fur garment, it is necessary to prepare an alkaline solution. For a liter of water, the following proportion must be observed:

1 tsp dishwashing detergent or laundry detergent;
5 g ammonia;
12 g of edible salt;
10 g of soda.

Important! If you didn’t have ammonia and soda at home, prepare a solution where other ingredients are needed in equal proportions:

Alcohol.

Vinegar.

The cleaning process is as follows:

Mix all ingredients.
Apply the resulting liquid mixture to the entire area of the fur product using a brush.
Rinse the product with clean water.

Important! To avoid drying out, lubricate the inside of the product with some kind of oily hand cream.

Let's move on to painting

Although any fur is a delicate material, you can dye fox fur at home, and even in different ways. Now we will talk about them.

Universal way

Since animal fur is very similar in structure to human hair, it is better to use good hair dyes for dyeing fur at home. This method is suitable for dyeing fox fur, as well as for mink and rabbit.

Important! Do not forget that you need to pay attention to the structure of the villi. For example, mink and fox fur have stiffer hairs, which cannot be said about rabbit or silver fox. For this reason, two packs of dye may be needed.

First of all, you need to make sure that the desired shade is selected. For this reason, before you start painting the entire product, test the effectiveness of the substance on an inconspicuous area of \u200b\u200bthe clothing. Further:

Apply paint using a brush.
Spread the mixture over the surface with your hands.

Important! For this, it is better to use gloves.

Keep the substance on the product for as long as it is written on the package.
Rinse thoroughly with clean, warm water.
Leave it to dry.

Important! During drying, it is better not to use fans or hair dryers - this will only harm the pile.

After the product has dried, it is necessary to place it in a solution of warm water with vinegar - this will help fix the paint on the pile and extend the wear life.

Important! To give mink, rabbit or fox fur extra shine, you can use a hair balm. To do this, apply a solution of water and balm to the fur, soak for a few minutes and rinse it off.

It is better to dye fur at home with hair dye in natural, basic colors. Otherwise, the fur may not behave as you wish. Eg:

Mink fur from the fact that it was dyed in a light color can turn yellow and lose its expensive look forever.
And with the fur of a white rabbit - on the contrary, you can experiment by giving it different shades, however, it is strictly forbidden to highlight it.

Important! If you doubt your abilities and are afraid to carry out the dyeing procedure yourself, it is better to take the fur product to a special workshop, where professionals will undertake this procedure.

We paint a mink

A mink fur coat is distinguished by its expensive look and durability to wear. In order to dye mink fur at home, you need to stock up on the listed materials:

Color matching hair dye.
Spray.
Comb with frequent teeth.
Shampoo and hair balm.
Oily cream.

To dye a mink coat or hat, you must follow the above algorithm:

Pre-clean the thing from fat deposits and dust.
Treat the mezdra with a greasy hand cream.
Prepare hair dye according to package instructions.
Slightly moisten the fur surface using the prepared spray bottle.
Now you can proceed to the main procedure - start painting a mink coat at home. To do this, apply the coloring matter using the same spray gun. The distance should be approximately 55 cm.
Align the tone by walking over the surface of the comb.
Wash off the paint with warm water and shampoo, rinse the product with a solution of water and hair balm.
Again apply cream or glycerin to the mezra.
Lay the product on a flat surface, wait for it to dry.
Comb the pile in the direction of its growth.

We paint a fox fur coat

The fox fur coat lends itself most well to artificial coloring. In order to paint it in the desired color, you need to prepare the following materials:

Hair dye that matches the shade of the fur product.
Glycerin or fat cream.
Balm.
Gloves.
Paint brush.
Vinegar.

To carry out artificial coloring of fur at home, you must follow the above algorithm:

Lubricate the mezdra with a fat cream or glycerin.
Stretch the material on a flat horizontal surface.
Put on protective gloves and start applying the coloring composition, simultaneously smoothing the villi with your hand.
Wait for the time indicated on the paint package.
Rinse the product in warm water.
Wash it in vinegar solution.
Treat a fur coat or hat with a balm diluted in water, rinse off the solution after a couple of minutes.
Lubricate the mezdra again with a greasy cream, stretch and let it dry on its own.

footage

In this article, you have learned many recommendations on how to dye the fur of a rabbit and other animals. As you have noticed, artificial coloring is not such a complicated procedure as it seems at first. So go ahead, put your things in order, but do it carefully!

Is there a piece of fur that has long gone out of fashion in your wardrobe? It is a pity to throw away clothes made of natural fur, so you can breathe a second wind into it. To do this, the product should be painted or restored to its previous color.

There are several ways to dye fur at home. To do this, it is initially necessary to clean it from traces of dirt and grease. Prepare a foam from liquid soap and water and apply it to the surface of the skin. Try to keep moisture from penetrating the core. Rub a little in the direction of hair growth and rinse with a damp cloth. To dry, flatten the product on a hard surface and fasten the item. It is necessary that the product is in a stretched state. After complete drying, you can start painting. Do you want to lighten fur? In this case, use hydrogen peroxide. It is necessary to apply a 10% solution to the product using a sprayer. After that, keep the solution for 30-40 minutes. Wash off the peroxide with water. In no case do not throw wet fur, it must be dried in a stretched form on a hard surface, so it will not lose its shape. Remember, the mink after clarification with peroxide becomes yellow, and the beaver becomes red. If you want to dye the skin dark, use hair dye. It is best if it is made on the basis of ammonia. On a dry and clean product with a brush, apply cream paint of the selected shade. Soak the composition on the hair for 30 minutes. Rinse under running water. Dry the product by stretching it. It is recommended to dye outerwear made of natural fur in shades one tone darker than at the moment. Do you want to make faded fox fur modern and beautiful? In this case, the gray skin must be washed with shampoo and dried. To make the wool shine, rinse it with a solution of vinegar. To prepare the rinse aid, dissolve a tablespoon of vinegar in a liter of water. After drying the product, lay it on a flat surface and secure with clips. In a plastic bag, make several holes in a checkerboard pattern. Place the bag over the fur and use your crochet hook to pull the strands through the holes. Shake a can of black suede paint and apply it to the wool. After drying, remove the cellophane and comb the product. The result is a highlighted fox. Now all down jackets are decorated with fur dyed in this way. After dyeing, rinse the fur well and pour over it with a solution of vinegar. You can apply hair balm, it will add shine to the product. Don't skimp on paint. Buy funds from well-known and trusted manufacturers. If you want to make the fur lighter by several tones, use a clarifier. In household chemical stores, the compositions "Blondoran" and "Supra" are sold. They are great for lightening hair. Do not overdo the composition on the hair, as they can be damaged and become brittle. As a result, all the fur will fall out of the mezra.

Do not save, hand over the fur to a dry cleaner or atelier. In such organizations they know how to handle natural fur and suede.

Synthetics are penetrating deeper into our lives, and everyday materials are gaining unprecedented value. And first of all it concerns those things that we put on ourselves. Beauty, wearability and convenience are on their side. True, over time they lose their qualities, which is why there is a need to learn how to dye fox fur at home. It is not necessary to spend money on the services of a professional for this.

Features of the hairline of the polar fox

The polar fox has relatively small dimensions: it is about half a meter long and weighs about three kilograms. Such a fur coat makes it possible to safely endure temperatures below -50 ° C. And all thanks to its such wonderful properties:

The cover varies considerably depending on the season. In summer, it is dark brown, which allows it to remain unnoticed in the environment;
In winter, it changes color to white-pearl, increases in size and density. Some species in the cold season dress in beige or gray tones;
The surface woolen tier is not rigid and has a considerable length. The down is dense enough to withstand the strongest gusts of wind.

Even after the death of the animal, its wool serves a useful service - only to a person. It has long been valued by clothing manufacturers for its excellent thermal insulation. In addition, products made from it are highly reliable and serve their owners for almost a decade. And the aesthetic characteristics make the polar fox wardrobe a tasty morsel for fashionistas all over the world.

How to clean a fox collar at home?

“If you like to ride, love to carry sleds,” says a well-known Russian proverb. Such an attribute of luxury as an arctic fox collar requires a particularly reverent attitude. And this concerns not least cleaning.

Fortunately, everyone has everything for this:

Greasy plaque is easily removed with an aqueous solution of ammonium hydroxide. To do this, it is necessary to dilute it in ordinary tap water. The result is an almost perfect stain remover;
Dog shampoo or even household detergent (dissolved in a small amount of tap water) will also work well. The main thing is not to use soap-based chemicals, as they are very difficult to wash off;
The hydrogen peroxide in every first aid kit will effectively remove any stains if sprayed through a spray bottle;
An unusual but effective way is to use ... gasoline. This fuel has proven its excellent cleaning properties. In addition, there is no need to rinse it off: it quickly evaporates on its own.

How to clean the fox from yellowness at home?

The worst thing that can happen to an expensive purchase is the loss of original aesthetics. Gradually, this happens even with the most expensive wardrobe items. But proper care will prevent the appearance of fatal yellowness:

It is necessary to heat an empty frying pan over medium heat and pour a couple of tablespoons of ordinary flour into it. As soon as it becomes hot, it should be immediately sprinkled on the stains. After a few hours, the product can be shaken, and it will be as good as new;
Instead of flour, starch or peeled rye bran will go. The cleaning technology is the same as in the previous case;
Another indispensable assistant to the hostess in the fight against chronic pollution is vinegar. A small piece of cotton wool is moistened with liquid and problem points are treated with it.

It is important to avoid strong mechanical impact. So, it is strictly forbidden to rub or use a household hair dryer to dry the fur with force.

Dyeing fox wool: preparation

You can change the natural color of a wardrobe item both in a specialized studio and on your own. The latter method is many times cheaper, so we will focus on it special attention.

First, the material is processed so that the dye lies on it evenly. To do this is relatively simple. You just need to prepare a solution from improvised substances:

40 grams of table salt;
Sodium bicarbonate - 40 ml;
20 ml of ammonia;
Two liters of tap water with a temperature of 30-40 degrees.

All of the above ingredients should be mixed and left for half an hour. Then apply the mixture to your clothes. To achieve the best effect, it is recommended to arm yourself with a brush (however, very carefully). Then remove the gruel with a damp cloth.

The next stage of preparation is drying. It should be done in a well-ventilated room or outdoors in warm sunny weather.

Carrying out painting work

We list the main stages:

Pick up a dye. Ordinary hair dye will do (it is preferable to opt for brown tones);
If you're lucky, you can stumble upon a special paint for this type of surface. It is diluted in the required concentration (all instructions are on the package);
Treat the mezdra with glycerin or petroleum jelly in order to reduce the likelihood of skin drying out;
Staining is carried out immediately after cleaning. An excellent working tool is a hair brush, which can be found in any cosmetics store;
As a rule, deep processing is carried out, to the very base of the hairs. But nothing prevents you from showing your imagination and painting according to your own ideas about beauty. So, you can cover only the surface part.

We told you in detail about how to dye fox fur at home. Any housewife will cope with this task. The sequence of work is extremely simple: preparation, drying, application. So old things will find a new life and will delight their owners for many years to come.

For those who are interested in how to dye fur at home, we will share our secrets. There is no need to rush to throw away a fur thing if it is a little burnt out, or you are just tired of its color. Following our instructions and following the advice, you will give things a second life, you will be happy to wear it ... until the next painting.

Important information before dyeing fur

Astrakhan fur can only be dyed black or brown.
Mink fur of gray, blue, brown color is dyed in the same colors to obtain a more intense shade.
In brown, you can qualitatively dye the fur of pastel, beige, pearl tones.
Mouton items are dyed brown or black.

Very often, hair dyes are used to dye fur at home. This is not a difficult procedure, but requires attention and accuracy. Here's how to do it.

We paint fur with hair dye

Apply a layer of any oily cream, or a solution of glycerin, to the mezdra of the fur - this will protect it from drying out.
Moisten the fur carefully. This will allow the paint to spread more evenly.
The paint is applied to the entire fur surface, not forgetting the core.
For a more even distribution of the coloring composition, the fur needs to be wrinkled by hand.
The exposure time of the paint is from 35 to 45 minutes.
Rinse off paint under running water.
If you place the dyed item in a saline solution for 5-10 minutes, you can get a more durable and shiny color.
Spread the fur on a flat surface, remove excess moisture with your hands, and leave to dry.
Comb the dried fur in the direction of the villi.
Hair dye will keep well on the fur for up to six months, then it will begin to “peel off”.

The fur chosen for dyeing should not be very old,
Remember, it is good to dye the fur at home when it is clean. If there is dust, dirt, grease on the hairs of the fur, this will not allow the paint to penetrate into the hair, and the product will be dyed unevenly, with spots. Alkaline solution copes well with fur cleaning. Its composition: take salt and baking soda per liter of water - one dessert spoon each, a teaspoon of ammonia, a little dishwashing detergent.
If a product made of white fox has turned yellow, then it can be lightened. We prepare the solution: pour a teaspoon of hydrogen peroxide into a glass of warm water and drip 7-10 drops of ammonia. Treat the ends of the fur with the finished mixture. Wipe the treated fur with a cotton swab moistened with water. Try not to wet the leather base - the core. Before processing the entire product completely, conduct an experiment on a small inconspicuous area.
For painting, you should choose a dye whose shade is darker by one or two tones than the color of the product. So you can hide small "skin" defects. The fur of a red or steppe fox can be easily updated with a thick solution of potassium permanganate - potassium permanganate, diluted to a dark brown color. Coloring should be done with a foam sponge, avoiding wetting of the core.
You can “refresh” the burnt ends of the fur using suede paint, which is available in the form of an aerosol. Uniform coloring can be achieved by spraying the paint slowly, from a distance of at least 70 centimeters from the product. Having processed one area, it should be combed, smoothing the fur.
Using a tinting shampoo, you can update the color of the fur, making it richer.

Summary

Even knowing well how to dye fur at home, you probably shouldn’t dye large fur products on your own. For this, there are special establishments where qualified craftsmen will qualitatively fulfill your order. Good luck.