Children are indefatigable dreamers, and their activities can endlessly touch and delight adults. When the results of creativity are in a clearly visible specially designated place, young fidgets are delighted.
Exhibition board equipment is not always associated with large cash outlays. Any interested parent is able to make children's stands with their own hands.
How to choose the right material
Among the large assortment of modern stands, more and more consumers opt for cork boards. They are easy to use, reliable, durable, affordable.
Natural material - cork oak bark - satisfies general requirements safety for children's products and has a number of positive qualities:
- ecologically pure;
- easy to clean, does not attract dust;
- moisture resistant;
- refractory;
- chemical resistant;
- not damaged by fungus, insects;
- not electrified;
- shockproof;
- wear-resistant.
Cork stands will be a win-win option for both home and kindergarten.
How to make a stand
You do not need to have special craft skills and knowledge to please yourself and your children with a functional novelty in the house.
Think in advance how to harmoniously fit the new stand into the interior.
You can experiment both with the color of the board itself - paint it or upholster it with a fabric of the desired color, and with the frame, choosing the best combination.
The frame is usually made of wood, plastic, metal profile. It is also advised to use cable channels, the width of which is slightly greater than the thickness of the board.
Choose the type of wall mount for the stand: non-removable version with glue or free hanging on hinges.
The minimum set of blanks and tools used, 30 minutes of work - and the result will be on the wall.
Determine the desired dimensions of the stand, prepare a cork sheet to fit.
Choose the material for the back wall - plywood, fiberboard.
Glue both sheets. Glue - liquid nails, you can use another. Degrease the surface first, after applying the glue, press the parts tightly against each other. If desired, cover the working surface of the stand with a cloth.
Attach the previously prepared frame to the base. If desired, attach loops for fastening on the reverse side.
Fix the stand to the wall with glue or double-sided tape for a non-removable option. For alternative way- hang on loops.
How to rationally use the stand
After you have made a stand with your own hands, you can begin to actively exploit it.
Note!
There are two main formatting methods. You can fix pockets on the surface of the board. These can be files for papers, or transparent pieces of thin plexiglass, fixed on double-sided tape.
This type of design is used for information stands.
The pockets hold sheets of paper. important information, which parents should know about the working hours, routine, rules of behavior for children in kindergarten.
The information can be updated daily (food menu) or as needed.
Stands are actively used by people different ages both at work and at home. Reminders of important events, planning for the near future, pleasant memories captured in photographs, visualization of your desires, a convenient organizer - everyone will independently add the most relevant for themselves to the list of useful functions.
On cork demonstration stands, the necessary items - photographs, pictures, paper notes, small souvenirs are fastened with buttons, pins, tailor's needles.
Note!
The surface of the board does not suffer from this, there are no holes visible to the eye. When designing a stand for children, you need to make sure that sharp objects cannot harm the kids.
The stand, on which educators attach the results of children's work for the day, is always popular with caring parents. And the children are happy to present new crafts and arrange mini-exhibitions already in the apartment.
Take a photo of the filled stand as a souvenir, and let it be constantly updated - the world of children's imagination is inexhaustible.
DIY booth photo
Note!
The master class is intended for educators of preschool education. These pencils can be used to decorate group rooms.
Tools and materials for work:
Pencil pattern;
Sheet of colored cardboard A4 format;
A sheet of white coated cardboard;
PVA glue;
Narrow double-sided tape or glue gun;
Dry pastel or gouache of beige and light brown color (for tinting white cardboard under a tree).
Step by step instructions for making:
1. On a sheet of colored cardboard, draw a pencil pattern and cut it out (do not forget about allowances).
2. In order for the edges to bend well, it is necessary to go over all the edges with the sharp edge of the scissors. Then bend as shown in the picture.
3. We begin to glue the pencil from the point (we glue the part “1” onto the part “*”).
4. Glue the tip to the pencil and use double sided tape or glue gun glue the pencil.
5. Cut out two parts from white coated cardboard (do not forget to leave allowances at the base of the pencil). For better bending of the edges, we also use scissors.
6. Now you need to tint the white details under the tree. You can use gouache, I tinted with dry pastel. Shredded pastel (several colors can be mixed) must be applied to cardboard with a damp cloth, in the direction from the center to the edge.
7. We glue the parts (as well as the tip of a pencil - we glue the part “1” onto the part “*”)
Anna Svetlichnaya
Dear colleagues!
In connection with the introduction of the Federal State Educational Standard, the task educator organize work with parents, one of the forms of which is information corners. I want to bring to your attention master- manufacturing class booth"No one is forgotten, nothing is forgotten!"
First, we need to develop a layout. I did it in PowerPoint
To work we need...
Width of our stand 1 meter, i.e. 2 tiles.
Since the layout is 4 wavy stripes, then 1 template is suitable for both the concave and the convex part, only upside down.
Apply the template to tiles, circle with a pencil.
top cut tiles
and apply to the bottom of the part, combine, so that the cut coincides, and when we assemble booth I didn't have to tweak the details.
We turn the part over, circle it and cut it out from another tiles, then the details will match.
Details are best numbered immediately with reverse side. Thus, 4 strips are cut, each of which consists of 2 parts.
For painting, mix color with PVA glue, achieving the desired shade. We color the parts according to the numbering, not forgetting to paint over the edges.
Name booth typing on a computer, making templates, tracing and cutting out tiles.
We also need flowers. We make a template.
We will have flowers voluminous. To do this, we will have to cut the template several times.
First, cut off the cup from the flower. We circle on tile received parts.
Then we cut the cup into 2 parts, circle the smaller one, cut it out.
We cut off the upper part from the flower template, circle the resulting part on tiles.
We cut off another part of the template and circle the very bottom of the flower on tiles.
It turns out bulk flower.
Now let's paint all the details with the desired color. When the paint is dry glue it together "The Dragon". Details of flowers are glued together on the reverse side with scraps tiles.
More for making booth we need the Eternal Flame. In our case, the picture is cut out, glued with a pencil glue and laminated with adhesive tape. Cut out with a clerical knife, retreating from the edge of the picture a couple of mm.
Now we will deal with the pockets that are needed to place information. You can make them from: files, corners, folders, or you can buy ready-made ones. We will make pockets from folders. The folder needs to be cut.
With the help of self-adhesive paper, we make a frame. Glue double sided tape on the reverse side.
Now let's collect our stand. Parts are fastened together on the reverse side with scraps tiles and glue"The Dragon".Then we place our details: pockets, flowers, letters and Eternal Flame. Fill in the pockets with information.
Loading...