In order for the paint to lay down evenly and reliably color the fur, the product must be prepared for coloring. To do this, the fur surface must be cleaned of grease and dirt with special means.
Before painting, it is necessary to prepare the fur
For cleaning you need:
- Before that, you need to prepare an alkaline solution of ammonia, salt, soda and dishwashing detergent (you can use washing powder).
- The resulting slurry must be spread evenly on the surface to be treated with a clothes brush.
- After some time, wash off the product with running water.
An alternative cleaning solution can be a liquid of alcohol, vinegar and water, which is applied in the same way as the first option.
Such cleaners are suitable for processing the fur of arctic fox, mink, silver fox and rabbit.
Usually, standard hair dye is used to renew the fox. The fur is quite dense, and therefore it will take several packs so that the resulting color is saturated and uniform.
Use hair dye
In this case, you need to choose a paint one or two tones darker than the original. This will avoid unpainted areas and make the thing brighter.
Before covering the entire area with paint, you need to try to process a small area. This will allow you to see how the color will change under the action of chemicals.
Before full dyeing, check how the fur reacts to the paint
In case of color fading (especially the ends of the pile), it is better not to dye the fur, but to lighten it. The main thing in this procedure is to correctly choose the composition for staining. For this, hydrogen peroxide and ammonia are used, taken in different proportions.
Tinted hair balm is an alternative to permanent dye.
Toning with tint balms
It will help to gently color the pile, providing the necessary care for fur products. However, this method of solving the problem is not durable, since the balm is gradually washed off when precipitation in the form of snow and rain enters, and it can also pollute light things that are in close proximity to the fur.
Things made of fox fur often lose their attractiveness due to yellowing of the tips of the pile. In this case, there is no need to paint the entire product. It is enough to use an aerosol can for processing suede.
Aerosol spray for painting
Before dyeing fox fur at home, you need to choose a suitable shade and spray it on the surface at a distance of about 70 cm. To prevent sticking of the pile, you need to constantly move the can. After applying the paint, the fur must be combed with a special brush for suede. And this must be done immediately.
In specialized stores, it is fashionable to purchase special paint in spray cans for fur care. With their help, you can quickly update the shade, making the product brighter.
Professional paint for fur
However, she also has some drawbacks: in contact with white things or a light fur coat, the dye can be transferred to lighter products. And the color itself will lose its luster and brightness after a few months.
Since mink products are considered quite expensive, the dyeing of such fur should be done as delicately as possible.
Before that, you need to check the degree of contamination of the pile. For this, a regular hair dryer will do. A jet of air must be directed to the pile: if the villi crumble, cleaning is unnecessary. However, if the villi roll over from one side to the other, sticking together, cleaning may be required.
Mink fur dyed with hair dye
Step by step procedure
The sequence of actions in both cases is identical:
- To start staining, you need to put on gloves and take a brush. After that, apply paint to the surface and smear it in such a way that there are no bright spots left.
- After enduring the time indicated on the packaging of the product, the product must be washed with water at room temperature with vinegar. To fix the pigments and make the pile shiny and soft, you need to use the balm that comes with the paint.
- Then it must be washed off and dried.
- Only a cleaned product can be dyed so that dirt and grease do not prevent the pigment from penetrating into the villi.
- When preparing the product for staining, the wrong side of the skin must be covered with cream (or petroleum jelly) to prevent the surface from drying out.
- Fur can only be dyed if it is not too old. Otherwise, it may be damaged during color change. In addition, the risk of mechanical damage to the product will increase significantly.
- You should choose a dye tone darker than the natural pile. This will help to hide minor skin defects and give a natural shade.
- To renew fox fur, you can use a manganese solution diluted to a dark brown tint. You need to apply it on the pile with a sponge, without affecting the core (skin). If you neglect the care, you can damage the base of the fur, which will lead to rapid wear of the thing.
- Since the skins can shrink after dyeing, you need to place the product on a flat surface and secure it before applying the dye with pins or thin nails.
By applying some fur care tricks, you can provide an attractive look to the product and extend its wear life.
Reading time: 7 minutes
The fur coat already looks worn, but it is still a pity to throw it away. To improve appearance you can paint it. With a detailed study of the information, this process will not be difficult. How to dye fur, what you need for this, how to prepare, is described below.
Before painting the product must be prepared. How can you clean the fur:
- a teaspoon of dishware;
- 2 teaspoons of salt;
- 10 g of soda;
- 5 g ammonia;
- litere of water.
From the components make a homogeneous liquid. Clothes are hung on hangers or placed on the table. Spread the cleanser with a brush, leave for a few minutes. Rinse with running water so that it does not get on the bottom.
What else is suitable for cleaning:
- mix water, vinegar, alcohol in equal proportions;
- distribute over the product, rinse.
After that, the thing is dried on the street or in a ventilated room. You can not hang next to the stove, battery.
These methods are suitable for cleaning mink, rabbit, silver fox, arctic fox - any natural fur.
Cleaning is necessary for uniform application of paint. Dirt, dust will not allow this to be done.
The leather part of the clothing is treated with ordinary hand cream. It won't dry out, it won't crack.
Fur varieties
Helpful Hints according to the color of the fur, depending on the type:
- White wool is the easiest to dye. Chinchilla, rabbit coat is easy to dye. Do this carefully so as not to damage the delicate fur. If the white villi turn yellow, they are lightened with hydrogen peroxide. Then any color will lie flat.
- The hairs of the arctic fox are dense, they will take a lot of time, paint. The fox is easier to work with, the paint lays down easily, the color remains for a long time.
- paint mink coat not easy. She is difficult to color.
- A thing from a nutria is easier to color than a mink one. It is similar to mink, but lighter. She has three types of hair in thickness and length, so the fur is adjacent.
- The dyed muskrat is pinkish with white spots. After a short time, it fades.
- The hair of a sheared beaver cannot be lightened beautifully. She will turn yellow. It is worth using darker paints on the original color.
- It is not easy to dye a muton fur coat due to high density. It is necessary to carefully distribute the dye, carefully monitor the uniformity of application. Otherwise, there will be stains.
- When dyeing silver fox wool, a new color is usually given to the longest villi.
Hair dye must not be applied to faux fur. Aggressive substances will ruin it.
Do not paint a new product, this will shorten its service life. Only an old, worn thing is subject to this process in order to serve its owner a little more.
Before painting, check the readiness of the skin. Rip off a little of the lining and moisten the skin with plenty of water. If you pull hard, and it breaks, then you can’t paint, otherwise the finished thing will fall apart into pieces. If it stretches, painting is allowed.
Where they paint
Where can I dye a fur coat or fur thing:
- In a studio specializing in fur processing. There they will repair and paint.
- Some dry cleaners have a fur dyeing service.
- The factories paint, but usually in large batches. If you wish, you can find a company to dye your fur coat.
- At home, it is easy to do it yourself.
Coloring process
- hair dye;
- tint shampoo / balm;
- spray paint for suede;
- spray dyes for fur;
- clarifier.
Bleaching agents injure the hairs. The fur coat after clarification will last less than originally planned. It is worth considering whether drastic changes are needed or whether it is worth painting a darker color.
Applying hair dye
Animal hair and human hair are similar in structure. This tool is ideal for dyeing fur. Before use, it is worth checking the action on a small inconspicuous area of \u200b\u200bthe thing. If necessary, first remove the yellowness from the clothes. After that, start painting. A quality ammonia paint is recommended.
How to use hair dye correctly:
- Put on gloves. Dilute the product according to the instructions.
- Apply to the product with uniform, quick movements. Rubbed all over the fur - spots should not remain. Movements must be careful so that the hairs do not break.
After staining, the skin is again smeared with cream. The thing is blotted with a towel, dried. So that the clothes do not sit down, they are pinned with pins to a hard surface with the fur up.
For painting in black, one procedure is not enough. This is done 2-3 times.
You should not do complex dyeing, highlighting wool on your own. Such work should be entrusted to professionals. If you have experience in dyeing hair in this way, you can try:
- apply paint to the ends;
- wrap in foil, leave on required time;
- rinse gently.
If painted natural fur coat at home correctly, it will last a long time. The color will start to fade after 7-9 months. After this time, it is recommended to update the color.
Spray can
The suede agent is suitable for dyeing part of the product. The ends of the fox fur may turn yellow over time. How to paint fur with a spray can:
- spray at a distance of 70 cm from the thing;
- move the spray all the time so as not to glue the hairs;
- comb through after spraying, then they will not stick together.
There is a special paint for natural fur in the form of an aerosol. She paints a small area, for example, fur collar. This part should not come into contact with the bag, constant interaction will leave a mark. How to do:
- sprinkle the desired area on a jacket or fur coat;
- massage for distribution;
- dry naturally.
Spray will not work to paint in a different color radically. You can enhance the shade, make it more saturated and deep.
Other options
You can recolor fur things in the following ways:
- A yellowed mink hat is lightened with the following composition: combine a couple of tablespoons of hydrogen peroxide and 10 drops of ammonia. Moisten the ends of the villi so that the liquid does not get on the skin.
- Paint a red fur coat with a manganese solution. It must be concentrated. Apply the solution with a new dish sponge and make sure that the skin does not get wet.
- Toning with a tinted shampoo will help make the color deeper, richer. This is true if earlier a fur coat, hat or vest was dyed with hair dye. The tint maintains the color to push back the time of the next hair dye.
- To soften an old fur coat and give it shine, you should use a hair balm. This is done after staining or mixed with a tint. Finish staining by rinsing in vinegar solution.
- Rabbit fur is dyed at home only in extreme cases with delicate dyes. It is very soft and thin.
- Fur inserts on the coat are dyed carefully so as not to stain the base material. If the fabric allows it, sew a piece of fabric on the main part in a few stitches. You can wrap a piece of unnecessary fabric, secure it with a pin.
How to dye faux fur with your own hands:
- remove dirt and dust with a cotton pad with shampoo, rinse with water;
- to update the color, use a tinting shampoo;
- use dye for faux fur, but not for hair;
- to evenly distribute the color, the thing is pulled, fixed;
- brush along the fibers, not missing the fabric;
- after the required time has elapsed, they are washed, the fur is combed, left to dry.
How to care
Proper care to preserve color, novelty:
- sometimes comb the hairs with a special brush;
- dry clothes if it is snowing outside;
- timely clean contaminated, worn areas;
- before putting away for storage, get rid of stains, dust;
- put on a cover for storage after winter.
Painting fur product- an easy task if you approach the process correctly and follow all the instructions. If the thing is badly damaged, you need to dye the entire fur coat or there is a fear that it will not work out, it is better to contact the atelier.
A chic fur coat made of natural fur is a must have in every woman's wardrobe. But after 5-8 years of wear, such clothes usually lose their appearance - the paint from the fur begins to wipe off. And as a result, an expensive fur coat begins to look bald. But a couple of bald spots is not a reason to run to the store and lay out a salary for a new “skin”. It is enough just to learn how to dye a fur coat at home. It is quite simple if you remember all the nuances.
How to dye a fur coat at home?
Fur coat treatment before dyeing
Undoubtedly, it will be much easier to take it to a dry cleaner or to specialists. Then the fur coat will definitely not deteriorate under any circumstances. However, you can do it yourself, but at your own peril and risk. When painting or changing the color of this kind of clothing, many factors should be taken into account - the age of the fur coat, the density of the seams, the possibility of the skin drying out. Can you dye a mink coat? Answer: of course. But first it has to be processed.
For this you will need:
· glycerin;
· ammonia;
a special product for washing fur products;
It is necessary to carefully coat the inside of the skins themselves (and not the lining) with glycerin. This is necessary so that they do not dry out after getting wet.
And the fur itself should be treated from dirt with an alkaline solution, which consists of three teaspoons of salt, one teaspoon of ammonia and a similar amount of detergent. All this must be poured into one liter of warm water and add a pinch of soda. Then mix thoroughly.
All this must be applied to a fur coat, laid out on the floor without folds, from the front side, carefully brushing the fur with a brush. This procedure will clean it of dirt, due to which the paint may lie unevenly. After that, the fur should dry on its own.
How to dye a fur coat yourself?
Now you can paint.
1. To solve the question of how to dye the fur, you will need several packages of high-quality hair dye (depending on size and density) and a large ceramic bowl.
The stereotype that fur products should be exclusively natural colors has long been destroyed. More and more fur showcases are full of models painted in trendy, boldest colors. Particularly relevant are products that combine natural leather and fur.
For example, leather jackets and jackets with bright fur inserts on collars and pockets are now a popular trend. Colored fur is also trimmed with such clothes as women's dresses, jackets, vests. Bright fur hats also won the love of young people.
Unfortunately, dyed fur has one drawback - over time, namely, after 4-5 seasons, it begins to fade and fade. If the product is loved, and you don’t want to part with it, then the question comes to mind - is it possible to dye natural fur yourself?
It turns out that it is possible, and even without the risk of damaging an expensive product. It is best to safely refresh the color of the fur with the help of special color sprays from Salamander. Spray cans are called Fur-Fresh, and have an assortment of different shades. This paint, in addition to the main purpose, has a number of additional advantages - it returns softness, silkiness and shine to the fur.
It is worth noting that this paint will not work to radically change the color of the fur, it can only enhance the existing shade or give it a little more depth and saturation. It is best to spray paint only collars, hats, and other parts that will not come into contact with the bag, because the paint can leave marks on it with constant contact. To paint the product with this paint, you need to apply it on clean fur, massage it lightly and then dry it.
There is another way to dye natural fur at home. For this, ordinary hair dye is used. After all, fur is similar in structure to human hair, and therefore such paint is suitable and safe. To paint a thing with it, you need to remove the entire lining, then lightly treat the skins with glycerin, this will prevent them from drying out, and only then proceed to painting. The fur is painted according to the same principle as the hair, using a brush. Hold the paint as directed in the instructions. Then the fur is washed and dried.
There are only three rules to keep in mind:
1. You can dye fur with hair dye only in darker shades, but not lighter than the original tone..
2. When washing off the paint, in no case should the leather fabric of the product be wetted!
3. Don't try to repaint a new item just because you don't like the color. The described technologies can only be applied to small damaged areas of the fur, observing the precautions described in the article.
If you doubt whether you can dye the fur yourself without damaging it, then give the thing to a dry cleaner, where they also provide services for various dyes.
Loading...