Dyeing natural fur at home. How to dye fur at home - the main methods. Dyeing a white mink coat

Fur products have always been distinguished by their invulnerability to high temperature differences and other factors. external environment However, sooner or later, the fur on them may fade, lose its former luster, become stained or simply shed. However, the loss of color in a fur coat is not a sentence at all, and it is possible to restore its former brightness without resorting to specialists. And today we will look at how to dye natural fur (for example, mink and arctic fox) and artificial fur in the most effective ways.

We paint fox fur products

In case of very strong contamination or discoloration, it is necessary to treat its surface with some kind of alkaline solution. Coloring elements do not get into the structure of oily or dirty hair. Therefore, to achieve an impeccable result, you need to make an appropriate solution. The cleaner is prepared as follows:

2 teaspoons of salt are added to 1 liter of water.
1 teaspoon of ammonia and the same amount of detergent.
2 teaspoons baking soda

The resulting substance should be applied to the fur with a brush. This product dries naturally.

When processing the inside of the fur coat, it should first be treated with glycerin or a fat cream. This is done to prevent it from drying out.

What color is better to choose?

The answer to this question is ambiguous. In any case, the final choice is yours. However, experts recommend painting the arctic fox in dark colors. If you want to dye your fur coat a lighter shade, pre-treat it with hydrogen peroxide.

Before dyeing the fur at home, you need to thoroughly moisten the fur coat in water. The usual hair dye is applied to the surface of the fur. It is not worth delaying the application of this substance. Do not forget about safety measures - use rubber medical gloves when working. They can be purchased at almost any pharmacy individually or in a package of 100 pcs. When applying paint to the fur, smooth the fur coat with your hand - so the substance will spread more evenly over the surface. After that, it is necessary to withstand the product for several minutes (as indicated on the paint instructions). Next, rinse the fur in warm water. It is best to add vinegar there. Now you can move on to drying. So that the fur does not “sit down” in the future, gently stretch it. Pin it with pins if necessary.

How to dye mink fur?

Mink fur is very similar in structure and appearance to human hair, so it should be dyed only with an aerosol or spray gun at a distance of at least 50 and no more than 80 centimeters from the surface. In order for the paint to be well absorbed into the material, it is necessary to carefully comb it after each application of a new layer. With the help of a comb, the paint is more evenly distributed over the surface of a fur coat and other fur products, as a result of which they will look fresh and attractive. As we noted earlier, mink is very similar in structure to human hair. Because of this, it is necessary to select a paint for it that would not harm its qualities. It is best to use a material that has been tested on your curls, that is, ordinary hair dye. This is sold in almost every supermarket and market. The range and variety of colors will satisfy even the most capricious fashionista, so choose the appropriate option, and then feel free to apply paint on a fur coat.

Drying

As for drying, such restored products can be processed with an ordinary home hair dryer. In this case, you should periodically comb the fur so that in the future it does not fall off. To add shine to the coat, use a hair balm. It will soften the fur well and make its color more saturated.

How to dye faux fur?

First of all, you need to decide what color you will paint this fur. Although, in general, the principle of work does not differ from whether you repaint the fur coat radically or process its surface only partially. The difference is only in time.

How to dye faux fur? As in the case of natural best remedy there will be hair dye. If you want to make the color of your fur coat dark or light (that is, one that is very different in shade from the true one), use persistent options. If you are going to process the fur only partially, a regular tinting shampoo is quite suitable for such purposes.

So, you bought the right paint. What to do next? Before dyeing the fur at home, you need to thoroughly degrease the surface of the fur coat and remove all dirt from it. To do this, use a cotton swab previously moistened with detergent or shampoo. And one more thing - before staining, it is better to check the color of the paint in advance on a piece of paper. Sometimes it happens that the bottle does not match the specified shade. Or you just don't like it. Then you will have the opportunity to change it, and meanwhile the fur coat will not suffer from double "torture".

How to dye fur at home? When applying the material to the fibers, make sure that the fur is evenly placed on the surface. To avoid unpainted areas, use a comb (same as with natural products). The material itself is applied with a brush in the direction of the fibers. Thus, the paint will capture not only the upper part of the fur coat, but also its fabric base.

Wait a few minutes until all the pigment is absorbed. The exact time of each paint is different, so always follow the application instructions. After the paint is well absorbed into the fur, rinse it off with water, shampoo if necessary. If the fur coat is easy to wash, you can put it in the washing machine. After that, comb the fibers with a comb and let the product dry. Comb again after drying. If the fabric base of the fur coat is not washable, remove the remaining paint from it with pieces of a cotton swab soaked in warm water.

Conclusion

So, we found out how to dye fur at home, as well as what tools you need to have available for this.

Any fur product on any girl it looks very beautiful and expensive, and you can wear it for more than one year. However, such things have a huge drawback - after a long wear, the villi begin to fade, lose their original appearance. From this article, you will learn how to dye fox fur at home so that you continue to be pleased to flaunt in a warm, beautiful little thing.

Preliminary preparation

Before you start painting a fur product, you need to prepare it, namely, get rid of all the dust and dirt on the villi. Otherwise, after the painting procedure, unpleasant stains and stains may form on the product, which will make it lose its former attractiveness even more.

So, for the procedure for cleaning a fur garment, it is necessary to prepare an alkaline solution. For a liter of water, the following proportion must be observed:

1 tsp dishwashing detergent or laundry detergent;
5 g ammonia;
12 g of edible salt;
10 g of soda.

Important! If you didn’t have ammonia and soda at home, prepare a solution where other ingredients are needed in equal proportions:

Alcohol.

Vinegar.

The cleaning process is as follows:

Mix all ingredients.
Apply the resulting liquid mixture to the entire area of the fur product using a brush.
Rinse the product with clean water.

Important! To avoid drying out, lubricate the inside of the product with some kind of oily hand cream.

Let's move on to painting

Although any fur is a delicate material, you can dye fox fur at home, and even in different ways. Now we will talk about them.

Universal way

Since animal fur is very similar in structure to human hair, it is better to use good hair dyes for dyeing fur at home. The the way is fine both for coloring fox fur, and for mink and rabbit.

Important! Do not forget that you need to pay attention to the structure of the villi. For example, mink and fox fur have stiffer hairs, which cannot be said about rabbit or silver fox. For this reason, two packs of dye may be needed.

First of all, you need to make sure that the desired shade is selected. For this reason, before you start painting the entire product, test the effectiveness of the substance on an inconspicuous area of \u200b\u200bthe clothing. Farther:

Apply paint using a brush.
Spread the mixture over the surface with your hands.

Important! For this, it is better to use gloves.

Keep the substance on the product for as long as it is written on the package.
Rinse thoroughly with clean, warm water.
Leave it to dry.

Important! During drying, it is better not to use fans or hair dryers - this will only harm the pile.

After the product has dried, it is necessary to place it in a solution of warm water with vinegar - this will help fix the paint on the pile and extend the wear life.

Important! To mink, rabbit or fox fur acquired extra shine, you can use hair balm. To do this, apply a solution of water and balm to the fur, soak for a few minutes and rinse it off.

It is better to dye fur at home with hair dye in natural, basic colors. Otherwise, the fur may not behave as you wish. For example:

Mink fur from the fact that it was dyed in a light color can turn yellow and lose its expensive look forever.
And with the fur of a white rabbit - on the contrary, you can experiment by giving it different shades, however, it is strictly forbidden to highlight it.

Important! If you doubt your abilities and are afraid to carry out the dyeing procedure yourself, it is better to take the fur product to a special workshop, where professionals will undertake this procedure.

We paint a mink

A mink fur coat is distinguished by its expensive look and durability to wear. In order to dye mink fur at home, you need to stock up on the listed materials:

Color matching hair dye.
Spray.
Comb with frequent teeth.
Shampoo and hair balm.
Oily cream.

To dye a mink coat or hat, you must follow the above algorithm:

Pre-clean the thing from fat deposits and dust.
Treat the mezdra with a greasy hand cream.
Prepare hair dye according to package instructions.
Slightly moisten the fur surface using the prepared spray bottle.
Now you can proceed to the main procedure - start painting a mink coat at home. To do this, apply the coloring matter using the same spray gun. The distance should be approximately 55 cm.
Align the tone by walking over the surface of the comb.
Wash off the paint with warm water and shampoo, rinse the product with a solution of water and hair balm.
Again apply cream or glycerin to the mezra.
Lay the product on a flat surface, wait for it to dry.
Comb the pile in the direction of its growth.

We paint a fox fur coat

The fox fur coat lends itself most well to artificial coloring. In order to paint it in the desired color, you need to prepare the following materials:

Hair dye that matches the shade of the fur product.
Glycerin or fat cream.
Balm.
Gloves.
Paint brush.
Vinegar.

To carry out artificial coloring of fur at home, you must follow the above algorithm:

Lubricate the mezdra with a fat cream or glycerin.
Stretch the material on a flat horizontal surface.
Put on protective gloves and start applying the coloring composition, simultaneously smoothing the villi with your hand.
Wait for the time indicated on the paint package.
Rinse the product in warm water.
Wash it in vinegar solution.
Treat a fur coat or hat with a balm diluted in water, rinse off the solution after a couple of minutes.
Lubricate the mezdra again with a greasy cream, stretch and let it dry on its own.

footage

In this article, you have learned many recommendations on how to dye the fur of a rabbit and other animals. As you have noticed, artificial coloring is not such a complicated procedure as it seems at first. So go ahead, put your things in order, but do it carefully!

A brand new mink fur coat or hat looks very attractive, but it is worth bringing the thing for several seasons, and the fur will lose its luster and its color will fade. If conventional cleaning methods are powerless, then it's time to paint the mink. But how to do that?

Caution and accuracy!

The best option is to use the services of professionals, since dyeing fur is a laborious and responsible process. When dyeing mink fur at home, there is always a risk of hopelessly spoiling the thing.

Well, if you are ready to take a chance, then experiment first with a piece of fur, which is sure to be attached to any mink product. This, of course, will take time, but you will get some confidence that you will not spoil expensive thing(or make sure otherwise).

Methods for dyeing mink fur

Now in the store you can buy special sprays for painting fur. They make it possible to quickly and without much hassle to return things to their original appearance, but at the same time they have a number of disadvantages: in particular, any light-colored thing, upon contact with your fur coat, will acquire its color, and the color of the fur coat itself will fade again after a few months.

A more durable result is the use of hair dye: after all, the structure of mink fur is similar to the structure of a human hair. But you will need a good preparation from a reliable manufacturer, only in this case the staining will be successful. As for the shade, it is better to choose a paint tone darker than the natural color of the fur.

It is imperative to pre-clean the fur, otherwise the fat and dirt on it will not allow the pigment to penetrate deep into the pile, and the result of painting will be unstable. Degreasing can be done with sawdust or potato starch, which is simply sprinkled on the surface of the product and then shaken off.

Next, you should treat the mezdra on the reverse side with any greasy cream, which will prevent it from drying out. Now you can start preparing the composition, following the instructions that you will definitely find in the paint box.

Using a brush or toothbrush, evenly apply the prepared solution to slightly damp fur (use a spray bottle to moisten), and then walk with gloved hands over its entire surface so that no unpainted spots remain. We lay the fur in the direction of hair growth and wait: the exposure time of the coloring composition is about 3 hours.

Further, under warm water, the paint is removed using shampoo, the fur is treated with hair balm, washed thoroughly and rinsed in a solution of vinegar (a tablespoon per liter of water). Now it remains only to carefully remove the remaining moisture with a soft towel and once again apply a thin layer of glycerin or any greasy cream to the mezra.

Keep in mind that after painting the skin can sit down, so for the time of drying, the core must be pinned with buttons to a flat, solid base. Fur must be dried at room temperature. If done correctly, after drying your mink should remain as soft and fluffy as it is, but with a more attractive, intense coloration.

Products from natural fur women always have a priority, because it is beautiful, expensive and prestigious. But what if something happened to your favorite fur coat, it burned out in the sun, or paint got on it? It doesn't matter - after all, it is quite possible to dye natural fur even at home. In order to dye natural fur, you will need the most common hair dye. The choice of color palette in this case is not limited: from fiery red to jet black. Just remember that after such dyeing, the color of the fur lasts up to eight months, after which the red fades and fades, and the black turns into dark brown and gradually turns red. You can also try to lighten the fur, but the result can be very unexpected: the muskrat becomes soft peach with a white undercoat, and the beaver turns yellow.

Before staining, it is worth holding small preparatory work. Mezdra (the lower layer of the skin) should be soaked with a fat cream, thus protecting it from drying out. Apply the paint to pre-moistened fur - the color will look deeper and lie more evenly. If you do not want to radically change the shade of the fur, then you should generally dry it a little - the color will turn out to be less intense.

After applying the paint, carefully remember the fur with your hands, rubbing the dye over the entire surface. Make sure there are no unpainted spots left. Leave the product for the same time as when dyeing hair, that is, 30-35 minutes.

After holding the right time, wash off the paint under a powerful jet of water. You can keep the skin for a few minutes in saline so that the color lasts longer and the hairs shine in the sun. Gently wring out the fur - you can lay it out on the bathroom wall and intensively run your hand over it several times.

Then lay the skin out on a surface to dry. It is better to let it drain and dry on its own. Comb the fur, setting the desired direction.

Advice from Osinka.
Skin coloring. Cheap skins, with appropriate processing and coloring, can look like expensive furs. Previously, the dyeing of furs was a very complicated matter: it was done using various mordants from chromium, iron and copper sulfate, etc. The introduction of aniline dyes into practice greatly simplified production, increased the color strength and the range of shades obtained.

When using aniline dyes, the color appears on the fibers with the help of oxidizing agents, such as: sodium perborate, hydrogen peroxide, etc. Sodium perborate is more convenient than hydrogen peroxide, it does not decompose so quickly and is cheaper.

2. Aniline paints for skins. Skin coloring can be done in two ways. According to the first method, the entire skin is immersed in a dyeing bath (dipping dyeing), according to the second, the dyeing liquid is brushed onto the hair (pointing).

If the skins are rich in fat, then before coloring they should be treated with the following mixture: 500 g of slaked lime, 250 g of iron sulfate, 150 g of alum per 10 liters of water. Apply the mixture with a brush, after which the skins are dried and washed well several times in water. Thanks to this treatment, the hair is degreased and takes color more easily.

For skins less greasy, you can use a solution of soda (6 ° B.) and soap for washing. The use of caustic soda should be avoided.

One more piece of advice.
First of all, we process the mezra as follows. With ordinary glycerin (so that not too much and not too little) we apply it on the surface of the mezra carefully so as not to touch the villi of the fur along the edges. We buy ordinary hair dye of the desired color (I note that the colors when painting light fur completely correspond to the palette of colors) henna - there will be red fur, basma-dark green. When the glycerin is slightly absorbed, we take a board and pin the fur around the perimeter with sewing pins, and paint according to the instructions attached to the selected paint. and dry it with a hairdryer. Done! If you want to make spots of a different color, then wrap the painted places in foil, there will be a beautiful spot.

Painting advice.
I am writing at the request of workers on the eve of winter.
We paint the fur, in my case there was a collar.
The coloring technology is simple - we rip off the collar - so that there is only fur, without fabric, etc.
We take hair dye - I took a black phytolinium garnier (gave the best result), we dilute the paint - the whole bottle went to my large collar, and we apply paint on a board dressed in a plastic bag with an old toothbrush.
There is such a catch - the fur is thick, the arctic fox, the mink is painted worse than the marmot - the undercoat is stained everywhere. It takes a long time and tedious to move the brush in different directions in order to evenly distribute the paint.
Leave for the time indicated on the bottle of paint. Periodically comb the fur with a brush, so that it would be taken more evenly.
Rinse off in the shower, apply (if any) balm. We wash off again. And then we prick the wet fur along the edge of the skin with needles on the board. We dry. I took it off the board when the fur was dry and the skin was semi-dry. In the process of drying, I combed it with a clothes brush. Then air dried.
At the end, it would be good to spread the mezdra with glycerin, or hand cream, or just sunflower oil.
And then - sew! smile
The main thing is not to dry it with a hair dryer, and not to let it dry without being stretched - my mink shrank after this, began to tear, in general - I ruined the fur.
But if everything is done well - my brown groundhog has become completely black, soft and smells like a pleasant balm.
Good luck!

Synthetics are penetrating deeper into our lives, and everyday materials are gaining unprecedented value. And first of all it concerns those things that we put on ourselves. Beauty, wearability and convenience are on their side. True, over time they lose their qualities, which is why there is a need to learn how to dye fox fur at home. It is not necessary to spend money on the services of a professional for this.

Features of the hairline of the polar fox

The polar fox has relatively small dimensions: it is about half a meter long and weighs about three kilograms. Such a fur coat makes it possible to safely endure temperatures below -50 ° C. And all thanks to its such wonderful properties:

The cover varies considerably depending on the season. In summer, it is dark brown, which allows it to remain unnoticed in the environment;
In winter, it changes color to white-pearl, increases in size and density. Some species in the cold season dress in beige or gray tones;
The surface woolen tier is not rigid and has a considerable length. The down is dense enough to withstand the strongest gusts of wind.

Even after the death of the animal, its wool serves a useful service - only to a person. It has long been valued by clothing manufacturers for its excellent thermal insulation. In addition, products made from it are highly reliable and serve their owners for almost a decade. And the aesthetic characteristics make the polar fox wardrobe a tasty morsel for fashionistas all over the world.

How to clean a fox collar at home?

“If you like to ride, love to carry sleds,” says a well-known Russian proverb. Such an attribute of luxury as an arctic fox collar requires a particularly reverent attitude. And this concerns not least cleaning.

Fortunately, everyone has everything for this:

Greasy plaque is easily removed with an aqueous solution of ammonium hydroxide. To do this, it is necessary to dilute it in ordinary tap water. The result is an almost perfect stain remover;
Dog shampoo or even household shampoo will also do a good job. detergent(dissolved in a small volume of tap water). The main thing is not to use soap-based chemicals, as they are very difficult to wash off;
The hydrogen peroxide in every first aid kit will effectively remove any stains if sprayed through a spray bottle;
An unusual but effective way is to use ... gasoline. This fuel has proven its excellent cleaning properties. In addition, there is no need to rinse it off: it quickly evaporates on its own.

How to clean the fox from yellowness at home?

The worst thing that can happen to an expensive purchase is the loss of original aesthetics. Gradually, this happens even with the most expensive wardrobe items. But proper care will prevent the appearance of fatal yellowness:

It is necessary to heat an empty frying pan over medium heat and pour a couple of tablespoons of ordinary flour into it. As soon as it becomes hot, it should be immediately sprinkled on the stains. After a few hours, the product can be shaken, and it will be as good as new;
Instead of flour, starch or peeled rye bran will go. The cleaning technology is the same as in the previous case;
Another indispensable assistant to the hostess in the fight against chronic pollution is vinegar. A small piece of cotton wool is moistened with liquid and problem points are treated with it.

It is important to avoid strong mechanical impact. So, it is strictly forbidden to rub or use a household hair dryer to dry the fur with force.

Dyeing fox wool: preparation

You can change the natural color of a wardrobe item both in a specialized studio and on your own. The latter method is many times cheaper, so we will focus on it special attention.

First, the material is processed so that the dye lies on it evenly. To do this is relatively simple. You just need to prepare a solution from improvised substances:

40 grams of table salt;
Sodium bicarbonate - 40 ml;
20 ml of ammonia;
Two liters of tap water with a temperature of 30-40 degrees.

All of the above ingredients should be mixed and left for half an hour. Then apply the mixture to your clothes. To achieve the best effect, it is recommended to arm yourself with a brush (however, very carefully). Then remove the gruel with a damp cloth.

The next stage of preparation is drying. It should be done in a well-ventilated room or outdoors in warm sunny weather.

Carrying out painting work

We list the main stages:

Pick up a dye. Ordinary hair dye will do (it is preferable to opt for brown tones);
If you're lucky, you can stumble upon a special paint for this type of surface. It is diluted in the required concentration (all instructions are on the package);
Treat the mezdra with glycerin or petroleum jelly in order to reduce the likelihood of skin drying out;
Staining is carried out immediately after cleaning. An excellent working tool is a hair brush, which can be found in any cosmetics store;
As a rule, deep processing is carried out, to the very base of the hairs. But nothing prevents you from showing your imagination and painting according to your own ideas about beauty. So, you can cover only the surface part.

We told you in detail about how to dye fox fur at home. Any housewife will cope with this task. The sequence of work is extremely simple: preparation, drying, application. So old things will find new life and will delight their owners for many years to come.