Sunflowers are huge and beautiful plants that bloom just when the summer sun is unbearably scorching outside the window. Probably no flower is more associated with summer than the sunflower! Decorate your refrigerator with a stunningly warm sunflower magnet made from polymer clay and this will undoubtedly bring warmth to your home!
In addition, you can decorate a hairpin with such a sunflower or create a summer composition - for creative imagination there are no limits here!
Step-by-step instructions with photos
So let's get to work.
Step 1: make the leaves
To make leaves, you first need to make a suitable shade for them. To do this, mix 1 part black, 1 part blue and 4 parts light green clay.
Mix everything well until you get a uniform color. You should end up with dark green clay.
Roll a piece of dark green clay into a ball. Then flatten this ball into a thin disk. Squeeze one side of the disc with your fingers and pull it forward. This way you should have a leaf.
Using a thin blade, form a center line and veins on the leaves.
Step 2: prepare clay for petals
- To make petals, take 2 parts yellow and one part each orange and light brown clay.
- Roll out all the pieces into a cane. Press the canes together this way: first brown, then yellow and finally orange.
Roll the canes into a ball. After this, pull the ball into one long cane. Fold it in half lengthwise and roll it back into a thin cane.
Step 3: sculpt the petals
Pinch off small pieces 1-1.5 cm long from the cane. Roll the pieces into thin tubes. Press the ends of the tubes towards the middle.
Step 4: make the middle
Form a medium-sized ball from a piece of dark brown clay, which you then squeeze into a round disk.
Use a toothpick to make small, thin indentations on the disk.
Step 5: Collecting the Flower
Stick yellow-brown petals to the underside of the disk. Lay the petals slightly overlapping - this way the sunflower will look more organic.
At the end of the work, bend some of the petals slightly to the sides - this will give them a more natural look.
Step 6: Bake the Flowers
- Bake the formed flowers in an oven for the amount of time indicated in the instructions for the polymer clay.
- Cool the baked sunflowers.
The polymer clay sunflower is ready!
You can glue a magnet to the reverse side of these polymer clay sunflowers and then put them on the refrigerator. You can also glue them to a hairpin or use them as decoration for a summer panel - whatever you wish.
I wish you all good luck!
Photo master class "Polymer clay sunflower". polymer floristry. Ceramic floristry. Modeling from self-hardening polymer clay or cold porcelain.
For those who would like to attend my in-person classes, but for one reason or another cannot do so, I create photo and video master classes on sculpting flowers from self-hardening polymer clay and cold porcelain.
This master class is dedicated to the sunflower flower. Lesson made in pdf format in excellent quality and contains more than 100 photos of the process.
Each photo is supported by a text description.
Number of pages: 59 pages. Almost all pages have two photographs and a detailed description of each step.
In the lesson you:
1. Learn to sculpt sunflower leaves and flower; collect stem.
2. Learn how to make the leaves matte and the middle semi-glossy.
3. Learn to match the base color of greens
4. Learn how to properly shape the top of the stem.
Lesson options:
- lesson: PDF file 59 pages
- an 11-minute video that shows the process of sculpting a petal, tinting the petal, the primary assembly of the petals, as well as rolling the stem near the sepals. Video without audio track (music).
ATTENTION!
Please remember that by paying your invoice you agree that you are aware that this training material is copyrighted and is intended for your personal use. It is prohibited to reprint, copy, transfer to third parties, resell, distribute by any means, either paid or free, in part or in full, without my written permission, certified by my signature and seal. You can print the book for yourself if you are uncomfortable reading from the screen. I specifically installed on this edition low price so that everyone can afford to buy it. Please show respect for me and my efforts. Thank you!
We present to you a master class on making sunflowers from polymer clay with your own hands. Despite some external complexity, making such a flower is not particularly difficult, but step-by-step instruction with photographs they will tell you exactly what needs to be done and in what sequence.
Tools and materials Time: 1 hour Difficulty: 4/10
- polymer clay in bright green, black and blue shades (for leaves);
- polymer clay of yellow, light brown and orange colors (for petals);
- dark brown polymer clay (for the middle);
- toothpicks;
- blade.
Sunflowers are huge and beautiful plants that bloom just when the summer sun is unbearably scorching outside the window. Probably no flower is more associated with summer than the sunflower! Decorate your refrigerator with a stunningly warm sunflower magnet made from polymer clay and it will undoubtedly bring warmth to your home!
In addition, you can decorate a hairpin with such a sunflower or create a summer composition - there are no limits to your creative imagination!
Step-by-step instructions with photos
So let's get to work.
Step 1: make the leaves
To make leaves, you first need to make a suitable shade for them. To do this, mix 1 part black, 1 part blue and 4 parts light green clay.
Mix everything well until you get a uniform color. You should end up with dark green clay.
Roll a piece of dark green clay into a ball. Then flatten this ball into a thin disk. Squeeze one side of the disc with your fingers and pull it forward. This way you should have a leaf.
Using a thin blade, form a center line and veins on the leaves.
Step 2: prepare clay for petals
- To make petals, take 2 parts yellow and one part each orange and light brown clay.
- Roll out all the pieces into a cane. Press the canes together this way: first brown, then yellow and finally orange.
Roll the canes into a ball. After this, pull the ball into one long cane. Fold it in half lengthwise and roll it back into a thin cane.
Step 3: sculpt the petals
Pinch off small pieces 1-1.5 cm long from the cane. Roll the pieces into thin tubes. Press the ends of the tubes towards the middle.
Step 4: make the middle
Form a medium-sized ball from a piece of dark brown clay, which you then squeeze into a round disk.
Use a toothpick to make small, thin indentations on the disk.
Step 5: Collecting the Flower
Stick yellow-brown petals to the underside of the disk. Lay the petals slightly overlapping - this way the sunflower will look more organic.
In this master class we will make sunny flowers, namely polymer clay sunflowers. This process is simple, so it takes no more than an hour for an experienced craftswoman; we advise beginners to thoroughly prepare and study the section. With some effort, you will end up with a beautiful set of sunflower jewelry or an unusual flower arrangement. Such compositions are very fashionable in Lately began to decorate the interior. It is especially important to do this before the holidays. Transform your interior and order furniture from the manufacturer. And complement it with sunflowers.For work we will need the following tools and materials:
- Polymer clay in three shades: yellow, brown and black (how to choose clay - read the article);
- Blade or stationery knife, figured blade;
- Round cutter;
- Nail clippers, nail scissors will also work;
- Toothpicks or needles;
- Pasta machine or rolling pin;
- Varnish for polymer clay.
Before starting work, knead the plastic thoroughly.
1. Using a pasta machine at maximum thickness, roll out the black plastic. Using a round cutter, cut out three shapes.
2. Using manicure tweezers, starting from any edge of the black plastic mold, lightly pinch the clay so that triangles are formed (drive the tweezers to the depth of the layer and pinch).
3. Using polymer clay in yellow and brown shades, we make a smooth color transition. Keep the proportions of different colors of clay in the same ratio as shown in the figure.
4. Fold the resulting yellow-brown ribbon like an accordion.
5. We squeeze the cane, using our fingers we pinch the top in the yellow area so that the sausage has the shape of a petal. Cut the cane into thin petals.
6. Use a toothpick to make a central vein along the petal. We do the same with all the petals.
7. Place the first layer of petals on the black core polymer clay sunflower. We do this so that each next petal overlaps the previous one.
8. Place the second layer of petals. We put them on the bottom layer so that they cover the space between the petals of the first row.
9. Don't forget to make holes in the places you need. For the earrings, I chose the thickest petals. Now we can safely send everything for baking. Strictly observe the baking time and temperature, following the recommendations on the package.
10. After baking, degrease the surface of polymer clay sunflowers with any detergent, polish if necessary, reverse side products and varnish the sunflowers. Insert connecting rings into the holes of the petals and hang earrings in them. And it is enough to place the metal base for the ring on quick-drying glue.
These sunflowers made from polymer clay can become stylish jewelry or decorate your interior. 
If you liked our site, express your “thank you” by clicking on the buttons below. Tell your friends. Thank you:)
Loading...