Often a favorite fur coat or vest loses its appearance, while other characteristics are still quite excellent. The villi fade, fade and give the product a very worn look. If you still want to enjoy the warmth and comfort of your favorite thing, then you can shade it a little. But not everyone represents how to dye fox fur at home.
You can not bother with self-painting, but give the product to a special workshop, where everything will be done quickly and professionally. But the cost of such a service is often prohibitive. It will be much cheaper to learn how to dye natural fur at home, and do this work yourself.
Important: Please note that if the product is still new, then it is categorically not recommended to dye it just to change the color, since any dyeing of the fur reduces its service life.
Each type of fur is beautiful and original in its own way. Painting each of them also has its own characteristics:
- White rabbit, chinchilla or mink fur is the easiest and easiest to dye, because it does not require pre-lightening. You can use any color that can cover the resulting yellowness.
Tip: Keep in mind that rabbit fur is very sensitive to chemicals, so it must be dyed with extreme care.
Preparation
To get a very good effect, fur product needs to be prepared for painting. Then the paint will lie much more evenly and there will be no bald spots. The most important thing is to thoroughly clean your coat or vest. To do this, prepare a mixture of the following substances:
- 2 tbsp. l. salt;
- 1 st. l. ammonia;
- 2 tbsp. l. soda;
- 1 st. l. washing powder;
- 2 liters of warm (not hot) water.
All components must be mixed and gently applied to the resulting mass of fur. Gently brush the villi with a brush so that not only the upper, but also their lower part is cleaned. Moisten then a clean cloth with water and wipe the fur from the composition.
After such cleaning, the fur must be dried naturally, without using either heaters or a hair dryer. It is also not recommended to leave the product in direct sunlight.
How to paint?
How can fur be dyed? This quite natural question arises in many people who are puzzled by the question of how to dye mink, rabbit or arctic fox fur at home. Of course, there are some very real home coloring technologies.
Fur of various colors Professional tool
You can use a special paint for fur, which is sold in hardware stores. It lies very naturally on the villi, as it is designed taking into account the characteristics of animal furs.
Hair dye
A more affordable option is hair dye. This is also the most popular coloring method, because you can choose any color from a huge palette.
Important: Keep in mind that fur should always be dyed in a darker shade. Over time, the fiery red color will turn into “rusty” or red, and black will shed to a dirty brown.
So, how to dye fur at home with hair dye:
- mix all the paint components according to the instructions.
- put on gloves.
- treat the mezdra (skin) with baby cream, glycerin or petroleum jelly to avoid drying it out;
- moisten the fur so that the paint is distributed more evenly;
- apply paint with a brush to the entire fur surface;
- remember the fur with your hands a little;
- wait 35-45 minutes;
- wash off the paint with water;
- lay the thing on a horizontal plane, wring out excess moisture with your hands, and leave to dry;
- after drying, comb the fur.
You can paint the fur not completely, but only the tips of the villi. As a rule, they are lightened to give the product a richer look.
Suede paint
You can treat the faded tips of the villi with suede paint, which is sold in aerosol cans. To do this, place the can at a distance of at least 0.5 meters from the thing and evenly paint the entire surface. Leave the fur to dry for a while, and then rinse it thoroughly. After that, prepare a fixing solution: 5 tbsp. l. vinegar to 2 liters of water. Wipe the pile with this liquid and leave it to dry.
If the fur product is already dark, but you would like to dye it in a bright and saturated shade, then you can discolor the fur. Hydrogen peroxide tablets or hair bleach will help in this matter.
Peroxide is diluted with water in a ratio of 1:3. If you use a clarifier, then dilute it as written in the instructions. Different manufacturers can produce clarifiers of different concentrations. Apply the prepared mixture on the fur and leave for 10-15 minutes. It is impossible to keep the composition on the pile longer, as the hairs can become brittle. After processing, rinse the fur with water and dry naturally. It will be possible to paint it only after complete drying.
When deciding to lighten and dye the fur, carefully select the color, because it will be undesirable to carry out these procedures again. None, even the highest quality fur, can withstand repeated dyeing.
When dyeing fur, it is important to know some of the nuances:
- The fur that you decide to dye should not be too shabby.
- Only clean fur will dye well, so it must be pre-cleaned.
- Yellowed white fur the arctic fox can simply be lightened.
- Before applying any dye, be sure to test it on an inconspicuous area of \u200b\u200bfur.
- When painting, you can hide some flaws and defects.
- Instead of full-fledged paints, sometimes you can use small folk tricks. For example: the fur of a red or steppe fox can be quickly and painlessly updated with a strong solution of potassium permanganate. In this case, use a small sponge. It must be dipped into the solution and carried out through the villi, trying not to touch the core.
- After dyeing and drying, the fur must be combed so that it becomes fluffy again.
- With the help of tinting shampoo, you can make a unique decor on your fur product. It just takes a little imagination.
Now you know whether it is possible to dye the fur of arctic fox and other fur-bearing animals, and also imagine the technology of this process. The main thing is to strictly follow all the instructions. And your favorite and cozy fur coat will delight you for some time with its warmth and flawless appearance. If you do not dare to take such a crucial step as dyeing fur, then contact the specialists in dry cleaning or a workshop for repairing fur products.
natural and artificial fur- very beautiful materials intended for tailoring exclusive clothes. Unfortunately, despite the high cost, they are prone to fading from ultraviolet radiation. Precipitation spoils them, other adverse factors, as a result, the brightness of products decreases.
To prevent a fur coat or hat from looking shabby, you need to learn how to dye fur at home, and use one of the methods.
Artificial material is much cheaper, less susceptible to adverse external influences, although it can also deteriorate and take on a worn look. You can also paint it, but not every tool is suitable. With the wrong selection of paint, hairs will come out, the material will shed heavily without the possibility of recovery.
Where to start painting
Before starting work, you need to carefully inspect the product. If it has traces of moth activity, other mechanical damage, “bald patches”, staining will not save the situation. It is better to take the thing to the studio, where they can give it a second life. The fur needs to be combed, cleaned of debris, dust, all impurities, so that the paint is light as evenly as possible. Next, you should choose the appropriate option for working with fur products.
How to dye fur: artificial and natural
Experts advise using for this purpose professional compositions designed specifically for dyeing fur skins. Such products are especially recommended if the hairs are thick and long. You can use hair dye, but you have to buy several packs, which can be quite expensive. There is an option to cover fur products with aerosol, which is sold in hardware and shoe stores. Such a tool can only refresh the ends of the fur. It is not possible to paint over the entire thickness of the material with an aerosol. For full coloring, you will have to buy a special tool or hair dye.
Before work, it is necessary to carry out a test for the degree of aggressive effect of the paint:
- dilute a small amount of the product (if it is powder);
- lubricate the material in an inconspicuous area;
- withstand the time specified by the instruction;
- wash off the paint;
- assess the condition of the material;
- start full dyeing, if the fur has retained its quality, has not changed its structure within 2 days.
When you want to make fur 1-3 tones lighter, you can use not paint, but clarifier. The most commonly used means are "Supra", "Blond" based on ammonia. It is better to paint artificial products only with specialized compounds with a note about this possibility. Hair dye will immediately ruin this material, so it's not worth the risk.
Coloring with paint for curls
In its structure, fur resembles human hair, so its color can be completely changed by a means familiar to every woman - hair dye. Similar products are sold in any supermarket, store household chemicals, and the choice of prices and shades is very diverse. When buying, you should consider the following mandatory requirements for paint:
- durability (usually acquire means that can paint over gray hair);
- the tone is at least one shade darker than the color of the hairs;
- gentle composition, no caustic substances.
If you want to lighten dark material, you first have to discolor it with the appropriate paint. Next, re-staining in the desired shade. It happens that white fur turns yellow from long wear. It will also have to be discolored before staining, otherwise the yellowness will distort the selected shade. For fox fur, you need to purchase more paint than for mink, rabbit. For a long fur coat, up to 5-6 packs of paint may be required.
Spray for dyeing fur
If the tips of thick fur are burnt out in the sun, it is not necessary to carry out its full coloring. Sometimes it is enough just to paint the discolored part, and the thing will shine like new. To update the fur, you need to purchase a spray for suede in a bottle, but you should not save on its quality. A low-quality product can stain hands, things, and human skin for a long time.
Using spray paint is very easy. You need to hang a fur product on a hanger on a balcony, terrace, or cover all surrounding surfaces with cellophane. Then spray paint from a distance of 40-50 cm, working through each area. After finishing work, you need to comb the fur, let it dry well. For drying it is permissible to use a hair dryer. Usually the result is enough for one season, then the thing will need to be painted again.
Selection of shades for different colors of fur
Coloring without preliminary discoloration should always be carried out in a tone darker than the original one. For example, to update the classic brown mink fur, you need to buy a dark brown dye. If the fur is new, has not been worn, has not burned out at all, it will be difficult to paint over it, since the pigments do not fit well on such material. You will have to add not only more funds, but also take a darker shade. This is easy to do: you need to pour a little black into the brown paint.
Gray and blue mink are usually dyed the same color, choosing the appropriate tone for the hair. The material will not change the shade, but it will become brighter, more saturated. Long-haired fur should also be dyed in a tone close to natural, because for high-quality dyeing of hairs, you will have to make a lot of effort and buy several packages of the product.
What is needed for work
Before starting the process, you need to prepare water, hair dye or a specialized product, a bleach preparation (if necessary). Also, to wash the fur you will need soda, ammonia, salt, soft detergent.
Stages of dyeing fur
To get a good, lasting result, you need to consistently follow all the steps and do the work carefully.
Preparing the item for painting
During wear, the thing became very dirty, began to shine, particles of fat settled on it. It is impossible to wash fur products with the usual method: they will immediately deteriorate in the typewriter. Therefore, for cleaning and subsequent uniform laying of the paint, it is necessary to carry out a special treatment with an alkaline solution.
Fur cleaning
To clean the material, you need to prepare a solution from:
- 2 liters of water;
- 2 tablespoons of soda;
- 2 tablespoons of salt;
- a tablespoon of dish detergent;
- 3 drops of ammonia.
All components must be diluted with water, shake the solution well. Hang the product on a hanger. Lubricate the skin (skin) with glycerin, after opening the lining. You can skip this step if you manage not to wet the skin. Otherwise, it may crack or shrink after drying.
Comb the fur, use a clean sponge to process the prepared product. Thick wool should be moistened with a brush, evenly distributing the liquid over the surface and carefully grabbing the undercoat. Wash off after 10 minutes clean water trying not to wet the skin. Then dry the product well in the open air, in a ventilated area. You can’t hang it near the battery, you can’t stove!
In addition to this recipe, there are a number of products that are suitable for cleaning fur:
- equal parts of 4% vinegar, water, alcohol;
- animal shampoo solution;
- professional cleansing spray (Furasol or other).
Color fixing
To fix the color, a solution is prepared: 5 tablespoons of table vinegar (9%) are diluted in two liters of water. After the product is sprayed with a fur product. If the dyeing was carried out with hair dye, you can apply the attached balm to the fur. This will make the product incredibly soft, silky. The balm is applied as on the hair, washed off after 5 minutes, and only then the pigment is fixed with vinegar.
Drying
When all work is completed, the fur must be dried. To do this, the thing is placed on strong wide coat hangers, which should fit well in size. It is advisable not to take metal coat hangers (wooden ones are ideal). The product must be brought into a warm room, but placed away from heating appliances, and allowed to dry. Before complete drying, you can apply a little glycerin to the fur and comb it, setting the desired direction to the pile. Usually drying takes 2-5 days depending on the type of fur and the size of the product.
Fur care after dyeing
Over time, the hairs of old fur can become stiff, fade even after dyeing. To fix the problem, you can periodically rinse the product with hair balm. It is better to take the tool that comes with the paint (you can buy inexpensive paint and pull out the balm). Sprinkling things with a solution of vinegar 9% (a spoonful in a glass of water) will also add shine. The effect of painting in any case will be temporary. Once a season it is worth tinting a thing so that it does not lose its gloss and always looks attractive!
You have to look for methods on how to dye fur at home when your favorite clothes wear out and lose their attractiveness. Returning the faded pile to its original appearance is quite simple. Available methods suitable for different type fur, do not require much effort, large investments. After processing, the thing will gain a second life, not remaining on the last shelf of the cabinet.
Material cleaning methods
Before dyeing fur at home, it must be cleaned. Manipulation is mandatory, because particles of dust and burning remain on the surface of the material, which, when stained, will begin to gather into lumps. Cleaning is best done with hair shampoo or dishwashing detergent.
You can carry out a composition of detergent and soda (1 tsp each). To them you need to add one and a half tablespoons of salt and 3-4 drops of ammonia. This composition is evenly distributed on the surface of the product. After half an hour, rinse with water, and then dry well. Drying near heaters, on batteries is prohibited.
Types of fur used for tailoring
The fur product is different, with its own characteristic appearance. Dyeing rabbit, mink or chinchilla fur is easier than others - they are initially white, so the pile does not need to be pre-lightened.
Note!
These are extremely sensitive materials. Processing with chemical compounds must be careful, otherwise the product will be damaged.
The density of the material is taken into account - the amount of paint used, the time of the procedure may change. The polar fox is painted easily, keeps color. Difficulties arise when you need to dye the capricious mink fur at home. It is difficult to lighten a beaver product, as the hairs turn yellow.
Unpredictable and difficult to work material - muskrat. The color fades quickly, it is difficult to give it an updated look. Hair dye is not recommended. It contains aggressive chemical compounds that can damage the material.
Painting methods: how to paint
Fox fur can be treated with a solution of potassium permanganate to restore its original color. With other materials, it is unlikely to be possible to use improvised methods. For the procedure, hair dye and suede, brighteners are used. Ammonia products are the most affordable and easy to use method. For the desired effect, you need only one package of such a product. The color is better to take 1-2 tones darker than the material. For example, when mink coat was black, and it was dyed white, the result may be yellow.
Suede dye is only suitable for dyeing certain areas of the product, for example, the ends of the pile. Suitable for lightening High Quality- the rest will be less effective. Aerosol paints are suitable for large products - they are easier to apply.
Staining steps
First you need to prepare for staining. You need to put your coat on the table. If staining is necessary only for the collar, it is better to stick it out. It is also important to carry out a paint tolerance test on a small piece of the product. To do this, the composition is applied to the sample. If after the procedure there are no damage to the villi, mezdra, the color suits you, you can start painting the product.
For the procedure, you need to use a special brush. Apply the paint evenly so that the shade is even on both the upper and deeper layers. After 40 minutes, remove the product with warm water. It is not necessary to paint a fur coat in one tone - highlighting will be an original solution. To do this, the colored tips are wrapped in foil. After a while, the foil is removed. Highlighting looks luxurious and rich. Also, such a procedure in a checkerboard pattern looks original. It is recommended to carry out the procedure with a suede treatment agent.
Note!
Before the procedure, you need to study the features of the material, some species, such as mink, are difficult to stain. Therefore, the number of helmets will need more.
Mezra staining
Mezdra is called the top layer of the skin, on which the wool is fixed. Usually it is light, but it also has to be processed, especially old products with a thin pile. Finished, where the mezra is too translucent, it is easier to process with a marker in black. So, the fur coat will look thick, and the mezra is less noticeable.
If it is a skin, the mezra is dyed with paint for leather, fabrics. Then it needs to be treated with a fat cream (to soften). Home staining is a risky undertaking, because there is a high probability of damage to the product. If the procedure is unavoidable, use a shampoo with a coloring effect, tinting paint. Buy quality paints. Their application must be careful - you can harm your skin and the product.
Fur care after dyeing
Proper care begins with the drying process of the product. To do this, it is stretched to its full length, preventing loss of shape. The whole procedure should take place naturally without the use of a hair dryer or heating agents. Otherwise, the villi and the mezra will dry out - the product will be damaged.
Over time, the villi become hard, lose their original color. Hair balm easily solves this problem. Usually it is in the package along with the paint. The tool will make the villi soft, with a beautiful natural shine. In addition to the balm, a solution of vinegar with water (1: 1) will be effective.
Features of painting fox fur at home
Dyeing expensive fox fur at home is not so difficult. For the procedure, you should prepare:
- hair dye;
- glycerol;
- hair balm;
- medical gloves;
- a special brush for painting;
- table vinegar.
- Treat the flesh with glycerin.
- Stretch the product as much as possible on a flat surface.
- Lightly moisten the cleaned surface with water.
- Apply paint to the product (with a brush), while smoothing the villi with your hand (in gloves).
- Wait 40-60 minutes.
- Rinse the pile with warm water, then treat with vinegar, then with balm and rinse it off.
- Re-apply glycerin to the mezra and remove the product to dry.
Features of painting a mink coat
The mink coat looks great. However, over time, it also begins to fade, so painting the fur coat is inevitable. The procedure should not cause difficulties, adhere to the following scheme:
- First, it is required from pollution, then apply a greasy cream to the mezra.
- Moisten the villi with water by spraying them with a spray bottle.
- It is also better to apply paint with a spray gun, after diluting it with water.
- Comb the fur with a comb and wait about half an hour.
- Remove the paint with warm water and shampoo, then rinse with balm and rinse the product again.
- Re-treat the mezdra with cream, comb the villi in the right direction.
- Hang the coat to dry on a hanger.
How to dye muton fur
- a material popular among fashionistas. A fur coat made of this material is very warm and comfortable. But even such high-quality fur loses its original appearance. It is easy for him to regain attractiveness if the staining is carried out taking into account the characteristics of the material. Self-dyeing this fur is no different from manipulating other species.
The mouton has a thick, dense structure, so it will take more paint than usual to process it. It is important to evenly distribute coloring pigments. This will ensure staining of the villi. Before the procedure, it is better to test the paint on a small piece of the product. If there are problems, it is better to trust the professionals and refuse to paint the house.
How to dye rabbit fur
After cleaning the material, you need to choose the color of the paint. The best will be dark tones, because for light shades, you will need to pre-lighten the pile. The quality of the paint affects the result.
The procedure is simple:
- moisten the villi with water;
- evenly distribute paint over them;
- remove the dye after a period of time specified in the instructions;
- it is better to wash it off with warm water, then treat the product with vinegar;
- dry the fur in a natural way in an upright position.
How to dye faux fur
There are no differences in the coloring of artificial and natural material. In the first case, it is possible to experiment by choosing any color. Cleaning of such fur is carried out with ordinary soapy water, which is distributed over the entire surface of the product with a sponge. Then you need to process the villi with paint of the shade you like. Drying is also carried out without the use of a hair dryer, batteries.
Finally
Any material eventually loses its original appearance. Therefore, the staining procedure is considered quite relevant. It should be borne in mind that the effect of the paint will be short-lived and can usually be expected to last about 7-9 months. Then the procedure can be repeated. The result depends on the material, the coloring agent and the features of the procedure.
It happens that with the onset of cold weather, you take your favorite white down jacket out of the closet and see that it is no longer worth wearing it ... The down jacket itself is intact - intact, but white fox collar has acquired an unpleasant yellow tint. With a sigh, you take off your collar and decide that over time you will have to buy a new thing, but for now you will wear it without a great addition in the past - fox trim. But do not rush to throw the collar in the trash or cut into fur patches. The situation can be easily corrected.
At home fur collar can be dyed with regular hair dye. And this procedure does not require much effort from you.
In this article, we provide step by step instructions fur dyeing.
1. In order for the dye to freely penetrate the structure of the fur, it is necessary before dyeing degrease and clean from dirt.
To do this, you need to prepare a special solution. We take:
- table salt - 3 teaspoons;
- ammonia - 1 teaspoon;
- any liquid detergent or pet shampoo - 1 teaspoon;
- baking soda - 2 teaspoons;
- water - 1 liter.
We process the fur with a solution with a brush. Then it should be thoroughly washed and dried.
2. It is advisable to protect the core, the lint-free side of the collar, from drying out before painting. To do this, it is lubricated with glycerin or any nourishing cream. Otherwise, your collar is more likely to tear.
3. Best Option – dye the fur a tone darker than he was before. But if your paint contains bleaching agents, then you can achieve the original color. Since fox fur is much thicker than the hair on a human head, we recommend stocking up with more than one tube of paint.
4. Now you can start for coloring the collar. We use the paint according to the instructions. In order for the coloring matter to be evenly distributed, it is better to moisten the fur with water beforehand. Work with gloves, apply the paint quickly, spread it over the fur with your hands - the main hair and downs should be thoroughly smeared.
5. At the end of the dyeing time, the fur is washed with plenty of water. After that, rinse the collar in a solution of vinegar. To rinse and add shine and volume to the fur, you can use hair conditioner instead of vinegar.
6. When our collar is rinsed, dry it gently with a towel.
7. In order for the collar not to shrink after dyeing, it must be dried on a flat surface, straightened well, stretched and pinned to the surface with needles. The collar should be dried with the fur facing up. The inside will take the longest to dry, so before removing the fixing needles, make sure that the collar is dry on the inside side.
How to clean silver at home
Many women prefer silver jewelry because this meta...
How to clean gold at home with improvised means
Everyone loves gold jewelry, and women are just crazy about them. And u...
How to clean suede at home
Suede is a very demanding material, so it requires a certain...
How to clean the carpet at home folk remedies
In our world of new technologies, we are already accustomed to all kinds of services....
Light in the house - create comfort with the help of lighting
Do we always know the reason for our bad mood or fatigue? By...
Synthetics are penetrating deeper into our lives, and everyday materials are gaining unprecedented value. And first of all it concerns those things that we put on ourselves. Beauty, wearability and convenience are on their side. True, over time they lose their qualities, which is why there is a need to learn how to dye fox fur at home. It is not necessary to spend money on the services of a professional for this.
Features of the hairline of the polar fox
The polar fox has relatively small dimensions: it is about half a meter long and weighs about three kilograms. Such a fur coat makes it possible to safely endure temperatures below -50 ° C. And all thanks to its such wonderful properties:
- The cover varies considerably depending on the season. In summer, it is dark brown, which allows it to remain unnoticed in the environment;
- In winter, it changes color to white-pearl, increases in size and density. Some species in the cold season dress in beige or gray tones;
- The surface woolen tier is not rigid and has a considerable length. The down is dense enough to withstand the strongest gusts of wind.
Even after the death of the animal, its wool serves a useful service - only to a person. It has long been valued by clothing manufacturers for its excellent thermal insulation. In addition, products made from it are highly reliable and serve their owners for almost a decade. And the aesthetic characteristics make the polar fox wardrobe a tasty morsel for fashionistas all over the world.
How to clean a fox collar at home?
“If you like to ride, love to carry sleds,” says a well-known Russian proverb. Such an attribute of luxury as an arctic fox collar requires a particularly reverent attitude. And this concerns not least cleaning.
Fortunately, everyone has everything for this:
- Greasy plaque is easily removed with an aqueous solution of ammonium hydroxide. To do this, it is necessary to dilute it in ordinary tap water. The result is an almost perfect stain remover;
- Dog shampoo or even household detergent (dissolved in a small amount of tap water) will also work well. The main thing is not to use soap-based chemicals, as they are very difficult to wash off;
- The hydrogen peroxide in every first aid kit will effectively remove any stains if sprayed through a spray bottle;
- An unusual but effective way is to use ... gasoline. This fuel has proven its excellent cleaning properties. In addition, there is no need to rinse it off: it quickly evaporates on its own.
How to clean the fox from yellowness at home?
The worst thing that can happen to an expensive purchase is the loss of original aesthetics. Gradually, this happens even with the most expensive wardrobe items. But proper care will prevent the appearance of fatal yellowness:
- It is necessary to heat an empty frying pan over medium heat and pour a couple of tablespoons of ordinary flour into it. As soon as it becomes hot, it should be immediately sprinkled on the stains. After a few hours, the product can be shaken, and it will be as good as new;
- Instead of flour, starch or peeled rye bran will go. The cleaning technology is the same as in the previous case;
- Another indispensable assistant to the hostess in the fight against chronic pollution is vinegar. A small piece of cotton wool is moistened with liquid and problem points are treated with it.
It is important to avoid strong mechanical impact. So, it is strictly forbidden to rub or use a household hair dryer to dry the fur with force.
Dyeing fox wool: preparation
You can change the natural color of a wardrobe item both in a specialized studio and on your own. The latter method is many times cheaper, so we will focus on it special attention.
First, the material is processed so that the dye lies on it evenly. To do this is relatively simple. You just need to prepare a solution from improvised substances:
- 40 grams of table salt;
- Sodium bicarbonate - 40 ml;
- 20 ml of ammonia;
- Two liters of tap water with a temperature of 30-40 degrees.
All of the above ingredients should be mixed and left for half an hour. Then apply the mixture to your clothes. To achieve the best effect, it is recommended to arm yourself with a brush (however, very carefully). Then remove the gruel with a damp cloth.
The next stage of preparation is drying. It should be done in a well-ventilated room or outdoors in warm sunny weather.
Carrying out painting work
We list the main stages:
- Pick up a dye. Ordinary hair dye will do (it is preferable to opt for brown tones);
- If you're lucky, you can stumble upon a special paint for this type of surface. It is diluted in the required concentration (all instructions are on the package);
- Treat the mezdra with glycerin or petroleum jelly in order to reduce the likelihood of skin drying out;
- Staining is carried out immediately after cleaning. An excellent working tool is a hair brush, which can be found in any cosmetics store;
- As a rule, deep processing is carried out, to the very base of the hairs. But nothing prevents you from showing your imagination and painting according to your own ideas about beauty. So, you can cover only the surface part.
We told you in detail about how to dye fox fur at home. Any housewife will cope with this task. The sequence of work is extremely simple: preparation, drying, application. So old things will find new life and will delight their owners for many years to come.
Loading...