Reinforced concrete thermal chambers TK 2.6-2.6-2.0 are high-strength special-purpose products that are used when laying underground utilities: water supply systems, sewerage and gas networks. Thermal, or as they are also called heating, chambers are used to accommodate heat pipeline assemblies, as well as equipment that requires constant maintenance during operation and, if necessary, repair. In addition, with the help of cameras, pipes of different sizes are paired and their intersection is carried out.
Thermal chambers allow you to place the following equipment: gate valves, stuffing box expansion joints, drainage and air devices, instrumentation and other equipment. Branches to consumers and fixed supports are also installed in the chambers.
The main areas in which thermal cameras are used are civil, housing and engineering construction. The high strength of these allows you to secure underground utilities from adverse factors environment, vibrations from vehicles passing over the pipeline, ground pressure, corrosion, as well as from unauthorized or accidental entry of humans and animals. Reinforced concrete thermal chambers TK 2.6-2.6-2.0 have increased strength and waterproofing.
Thermal chambers are immersed to a maximum estimated depth of 4 m. The top of the chambers is assumed to be at least 0.3 m deep. In wet soils, an accompanying drainage is laid along the heat pipeline line in such a way that the groundwater level does not rise above 1 m from the bottom of the chambers.
Reinforced concrete thermal chambers TK 2.6-2.6-2.0 in accordance with series 3.903 KL-13 “Heat supply. Prefabricated reinforced concrete chambers for heating networks” are made of hydrotechnical concrete class B22.5 in terms of compressive strength. The tempering strength of concrete is assumed to be at least 70% of the design strength. The class of concrete for frost resistance is F150, for water resistance - W4.
Reinforced concrete chambers thermal TC 2.6-2.6-2.0 are reinforced with welded meshes and frames made of rod hot rolled steel classes A-I, A-II and A-III. Lifting eyes for ease of assembly of prefabricated products are made of reinforcing smooth steel class A-I. Grids and frames are manufactured by contact spot welding. All embedded parts have anti-corrosion zinc coating 150 mm thick.
Reinforced concrete thermal chambers TK 2.6-2.6-2.0 are structures of high responsibility, the reliability and stability of the operation of communication networks and equipment depends on the quality of their manufacture. Therefore, the standards provide a number of technical requirements to manufacturing and appearance products. For example, only small sinks are allowed on the surface of products, the diameter of which should not exceed 10 mm, while no more than one sink is allowed per linear meter.
Reinforced concrete thermal chambers TK 2.6-2.6-2.0 must be made in strict accordance with the dimensions indicated in the project drawings. Permissible deviations from the design dimensions should not exceed: ± 10 mm - along the length, width and height of the products; ±5 mm - in thickness; ±5 mm - along the thickness of the protective layer.
Thermal chambers are intended for installation of underground pipelines of sewerage, water supply and gas pipeline networks, as well as prefabricated thermal chambers are intended for installation of intersections of heating networks.
Camera 1.8x1.8x2.0
| NAME | DIMENSIONS, mm | WEIGHT, tons | IMAGE | Price with VAT |
| VBK-1,8-2D630 | 2100*450*2100 | 1,93 | ||
| SBC-1.8 | 2100*700*2100 | 1,75 | ||
| NBK-1.8 | 2100*450*2100 | 2,10 |
Camera 2.6x2.6x2.0
| NAME | DIMENSIONS, mm | WEIGHT, tons | IMAGE | Price with VAT |
| VBK-2,6-4D630 | 2860*380*2860 | 3,95 | ||
| SBC-2.6 | 2860*1285*2860 | 4,53 | ||
| NBK-2.6 | 2860*680*2860 | 5,83 |
Camera 3.0x3.0x2.0
| NAME | DIMENSIONS, mm | WEIGHT, tons | IMAGE | Price with VAT |
| VBK-3,0-4D630 | 3260*380*3260 | 5,25 | ||
| SBC-3.0 | 3260*1385*3260 | 5,65 | ||
| NBK-3.0 | 3260*530*3260 | 5,40 |
Camera 2.5x4.0x2.0
| NAME | DIMENSIONS, mm | WEIGHT, tons | IMAGE | Price with VAT |
| VBK-4,0-2D600 | 4320*400*1430 | 2,58 | ||
| SBK-4.0-2.5x0.8 | 4320*2000*700 | 3,70 | ||
| SPK-2.5 | 1430*2000*180 | 1,28 | ||
| NBK-4.0 | 4320*400*1430 | 3,20 |
Camera 4.0x4.0x2.0
| NAME | DIMENSIONS, mm | WEIGHT, tons | IMAGE | Price with VAT |
| VBK-4,0-2D600 | 4320*400*1430 | 2,58 | ||
| VBK-4.0-1 | 4320*400*1430 | 3,20 | ||
| NBK-4.0 | 4320*400*1430 | 3,20 | ||
| NBK-4.0-3 | 4320*400*1430 | 3,20 | ||
| SBC-4.0 | 4320*200*700 | 3,70 | ||
| SPK-4.0 | 2870*200*180 | 2,58 |
Thermal chambers are made in the form of prefabricated reinforced concrete elements. When installing a thermal chamber under roads, the design of the thermal chamber can be reinforced with special plates. Mounting fastening of blocks and elements of the heat chamber to each other is carried out by welding embedded parts.
Prefabricated reinforced concrete chambers consist of individual elements:
- TK - thermal camera;
- VBK - the upper block of the thermal chamber;
- SBC - the middle block of the thermal chamber;
- NSC - lower block of the thermal chamber;
- SPK - the middle plate of the thermal chamber.
Product name and brand:
- Thermal chamber 1.8x1.8x2.0 (heat chamber consists of four reinforced concrete elements);
- Thermal chamber 2.6x2.6x2.0 (the heating chamber consists of three reinforced concrete elements);
- Thermal chamber 3.0x3.0x2.0 (heat chamber consists of three reinforced concrete elements);
- Thermal chamber 2.5x4.0x2.0 (heat chamber consists of eight reinforced concrete elements);
- Thermal chamber 2.5x4.0x4.0 (heat chamber consists of twelve reinforced concrete elements);
- Thermal chamber 4.0x4.0x2.0 (the heating chamber consists of ten reinforced concrete elements);
- Thermal chamber 4.0x4.0x4.0 (heat chamber consists of fourteen reinforced concrete elements);
- Thermal chamber 4.0x5.5x2.0 (heat chamber consists of twelve reinforced concrete elements);
- Thermal chamber 4.0x5.5x4.0 (heat chamber consists of sixteen reinforced concrete elements).
We provide delivery to any region of the Russian Federation. We fulfill delivery obligations regardless of the size of the consignment and the number of commodity items, the destination and the state of the transport network in the recipient's region.
"Prom ZhBI" every day sends dozens of tons of reinforced concrete products to different parts of the country. Our regular customers are large contractors from Kaliningrad and Vladivostok, Arkhangelsk and Belgorod, Nizhny Novgorod and Astrakhan. The constancy of orders that are made in "Prom-ZHBI" construction companies and operating organizations, due to:
- our compliance with the terms of delivery (terms, nomenclature and quantity of reinforced concrete products)
- efficiency in order processing
- compliance with the rules for the transportation of reinforced concrete products
- vast experience in organizing the transportation of reinforced concrete products, which allows you to avoid force majeure on the way
- well-established logistics system (we choose the most convenient and inexpensive delivery options)
With us you will always receive the ordered materials on time. We organize the delivery of any goods made in our production.
The low price for the entire range of products manufactured by the company is complemented by affordable delivery costs. At the same time, the Prom-ZhBI company takes care of all the organizational chores. We control:
- order picking and shipping
- route and travel time
- delivery time to the destination and completeness of the order at the unloading point
Regardless of the region in which you are located, delivery is organized as quickly as possible: wherever you expect the cargo, it will arrive to you on time and without any effort on your part.
Thermal Chamber 2.6-2.6-2.0
- it's a team reinforced concrete structure, is a box structure. According toSeries manufacturing 3.903 KL-13, V camera one, two openings or a hatch can be designed.Camera 2.6-2.6-2.0 consists of several blocks (upper, middle and lower). Such products are a device for underground engineering communications, and can be used on water supply, sewerage, and gas networks. The characteristics of the structure include strength and endurance, since after immersion in the ground, it constantly experiences a load from it, and transport also exerts pressure. Additionally, the product during production includes resistance to groundwater, high humidity and temperature changes. Reinforced concreteCamera 2.6-2.6-2.0 Designed for use in mildly aggressive environments.Deciphering the product label
Reinforced concrete thermal camera , including all its constituent elements, has a marking that, when working with products, facilitates their search in the range of products. The stamp contains brief concise information about the design. So if we consider the decryptionCamera 2.6-2.6-2.0 , you can see the following:
1. Camera - type of construction;
2. 2,6 - internal length in m;
3. 2,6 - internal width in m;
4. 2,0 - internal height in m.
Markings are indicated on the outer surface of the finished product, using rubber stamps or a stencil. The paint used must be of a special composition so that the inscriptions are not erased randomly, under various environmental influences.
Materials and production
Manufacturing thermal cameras regulatedSeries 3.903 KL-13. The blocks that make it up are produced in the factory or at the landfills of the construction industry. Products are made of hydrotechnical concrete grade M300, class B22.5. The brand of concrete mass in terms of frost resistance is F150, in terms of water resistance - W4. All constituent components of concrete must comply with the quality and proportions specified in the Production Series.
Because thermal chamber 2.6-2.6-2.0 constantly experiencing loads from the ground and cars, it must have high strength properties. To do this, its blocks are reinforced. Reinforcement is -additional hardening of a concrete product by adding interconnected reinforcement to it. For the manufacture of reinforcing products, hot-rolled bar reinforcement of class A-I, A-II, A-III is used, from which the manufacture of welded meshes and frames is provided. Also in the bodyCamera 2.6-2.6-2.0 mounting loops are laid, which simplify the work with the product during installation and transportation. They are made from smooth steel rods. class A-I. All embedded and overhead parts must have an anti-corrosion zinc coating applied by one of the following methods: metallization or hot-dip galvanizing.
Loading...