Decided to secure your own home, make it as comfortable as possible? Then the Smart Home from Rostelecom is a great solution for realizing your plans. With such a system, you will be aware of what is happening in the apartment during your absence. Thanks to special equipment, you will instantly receive a message about any incidents. In addition, you can remotely control devices. Installing and using the Smart Home is not difficult. But in case of difficulties, technical support will help to find a way out of this situation. You can manage devices using any device, both through your personal account and mobile software.

Smart home from Rostelecom - what is it?

In general, the Smart Home project from Rostelecom appeared back in 2015. But at that time it was a pilot version. It took engineers a few more years to improve the system and test it. Currently, everyone can purchase a Smart Home from Rostelecom for themselves. A personal account is created on the web resource of the service provider company and provides access to the necessary settings, control over the state of the room.

A smart home is a whole complex of devices that connect to the Internet and are used to monitor the situation in the room, online. In the event of an emergency, the user is promptly notified about this. Suppose, in case of leakage, smoke, unauthorized entry, the user receives a corresponding SMS.

Installation of devices is carried out quickly and after they are connected, the system is ready for operation. For management, a web interface or mobile software is used. In the consumer's office, you can configure scenarios according to which the system will work.

As for notifications, they come to email address, via SMS or push notifications to your smartphone. Information about what events occurred and were recorded by the equipment is stored in the cloud. Therefore, they cannot be stolen or lost.

The Smart Home service is designed for people who want to make their home safe, saving themselves from a large number of troubles. In addition, this system makes your apartment more technologically advanced.

How does it work

The Smart Home kit was designed with the view that even those people who do not have sufficient technical training can use the service. This applies both to the installation of devices and to the further use of the system.

Rostelecom offers such tools in order to control the equipment present in the apartment:

• You can visit the office located on the web portal of the service from any PC;
• An application for a portable gadget running on the Android platform;
• Software for iPhones.

Regardless of which control tool the user has chosen, he is given the opportunity to see online what is happening in the house. And all thanks to the installed cameras. In addition, in the client's personal account, the following options are available:

• Video recordings are stored for a week;
• Pieces of records selected by the client are saved indefinitely;
• Device failure alerts;
• Notifications that the sensors have worked;
• Analysis of the functioning of the video camera;
• Information about the actions of the equipment when the sensors react.

It does not matter which method of management the client chooses, through the personal account of the mobile device or on the official website of the company, you must go through the registration procedure. To do this, enter the following data into an empty form:

• Name and surname of the subscriber for whom the system was purchased;
• Email address;
• Place of residence, city, region;
• Mobile number.

After filling out the form, email You will receive an email with a link. Going through it is mandatory, it confirms your intention to register. Also, in the letter the user will find instructions for setting up the system.

Before the devices start working, you should:

• Carry out the installation of all devices and make adjustments;
• Download the Rostelecom Smart Home program to your mobile;
• Register on the official website of the supplier or in the application.
• After confirming the registration, you need to enter the account and proceed to the system settings.

Unfortunately, the software and hardware manufacturer does not provide the ability to remotely control all the equipment that is installed. In other words, the service will not be able to close the door to the apartment if the owner left it open and notify the security about it. The functionality of the system includes only monitoring, as well as notifying the user about an emergency incident.

Although, many features are quite useful, for example:

• An audible signal is emitted from the leakage and smoke sensor;
• The lighting turns on automatically when the front door is opened;
• Turning the light on and off based on data from the motion sensor.
• And this is not the whole list of features that will be useful for people who prefer safety and comfort.

The list of functions can be found in your personal account on the RTK website. They should be carefully studied and choose the most necessary.

How to connect

Currently, users are offered different packages of Smart Home services from Rostelecom. The cost and use of certain features depends on the selected set of equipment, as well as additional options, if the client decides to connect them.

Service packages:

1. Base. This package includes a camera, a controller with a battery, door and motion sensors. Based on the chosen model of such devices, they may contain temperature and humidity sensors.
2. extended. Such a package contains a basic set of devices, as well as smoke and leakage sensors.

Which package to choose depends on the needs of the user. Since the functionality of the devices is different, accordingly, the settings will differ significantly.

In order to use the services of the Smart Home and connect them, you need the Internet and a set of devices. You can order all this on the official website, or by phone hotline company, as well as by visiting the sales and service center of Rostelecom.

It should be noted that for the installation of equipment it is not necessary to lay additional wires. All sensors are removable, they can be rearranged. The equipment box contains detailed instructions, both by registering in your personal account, linking to it, and by setting up all devices. When connecting each equipment, step-by-step tips will appear in your personal account.

How much does the system cost

Anyone can use video surveillance from Rostelecom, Smart Home. As for the cost, for the company's clients, an installment option for twenty-four months is possible, with an initial payment of 1,300 rubles. For two years, you will have to pay 600 rubles a month for a basic package of services and 900 rubles for an extended one.

Everyone is offered another option - a one-time purchase of the system. In this case, basic services cost 11,590 rubles, and advanced services cost 16,990 rubles and free use of the system for a year. After the specified period has expired (with installments - 2 years, and with purchase - 1 year), the subscription fee for servicing one controller will be 350 rubles per month. By and large, unlike most competitors, the rates are quite acceptable.

Smart home Rostelecom

Important! The price of devices for a particular set may also depend on the region where the consumer lives. Therefore, it is better to check the cost with representatives of the company.

Summarize

Smart home from Rostelecom is an innovative product, thanks to which the company is mastering the market of smart devices that contribute to safety and comfort. By purchasing such a system, the user, being far away, will be able to observe what is happening in his apartment in real time. And also, in case of an emergency situation, you will receive a notification. Smart home has the following advantages:

• It is possible to manage devices, both through mobile phone by installing the application, and using a computer. As a result, you will immediately receive a notification about any unforeseen situations;

PARTICIPANTS OF THE PROMOTION:

• Any individuals who plan to use the Service for personal, family, household and other needs not related to the implementation entrepreneurial activity, with which an agreement has been concluded for the provision of such a Service, with the allocation of a unique identification code for these purposes.

PROMO PERIOD:

• Promo period - the period during which the Service is provided without charging an additional fee. Duration of the Promo period when connecting the Service on the terms of the Promotion: 12 (twelve) calendar months from the date of registration in the Personal Account of the Smart Home platform. The period of suspension of the provision of the Services, including violation of the terms of payment for the rendered Services, is taken into account in the total calculation of the Promo period.

TERMS OF ACTION:

As part of the "Smart Home: Security" Promotion, Special tariffs for the "Smart Home" service are available:

Notes:
* - the fee starts to be charged 12 months from the date of registration in Smarthome.rt.ru.
The service is provided subject to availability.
If the Service is provided through several controllers of the sets, the subscription fee is summed up for each controller.
The cost of the Basic set "Safety" is 11,590 rubles.
Additional cost smoke detection sensor 3490 rub.
Additional cost water leakage sensor 3490 rub.

• As part of the Promotion, the Potential User purchases the Equipment for the provision of the Service, pays its cost at a time and gets the opportunity to purchase the Service during the Promo period without charging an additional fee. After the Promo period expires, the Service will be charged at the Special Tariff (according to the Table). If during the Promo period the user independently changes the Special tariff to any other of the Base rates, then reconnection to the Special Tariff is not possible. In case of refusal of the Service connected under the Promotion, reconnection of the Service under the terms of the Promotion is not allowed.
• The purchase of a Service or a Service Package within the framework of the Promotion depends on the technical feasibility in a particular Regional branch and is determined when checking the technical feasibility of connecting to the address of the Service.
• In case of violation by the user of the requirements related to the provision of the Service / Service Package established by the current legislation of the Russian Federation and / or the agreement on the basis of which the user is provided with the Service, including violation of the terms of payment for the rendered Service / Service Package, the Operator has the right to suspend the provision of the Service / Service Package until the violation is corrected. If such a violation is not eliminated after 30 days from the date the user receives a notification from the Operator, the Operator has the right to unilaterally terminate the agreement on the basis of which the Subscriber is provided with the Service/Service Package.

Set of Smart Home "Security" in installments

Notes:
1. One user cannot connect more than three Service Packages to one personal account of the service " Home Internet”, “Home Phone” or “Television”.
2. The service is provided subject to technical feasibility.
3. In the case of the provision of the Service through several controllers of the sets, the subscription fee is summed up for each controller.
4. As part of the provision of the Service, it may be additionally provided additional service"SMS Alert"

Rostelecom has long pleased its customers with various communication services: mobile and home telephony, Internet, interactive TV. Not so long ago, the developers talked about new opportunity for subscribers - video tracking. By installing special equipment at home, a person can not worry about security issues if he goes on a long business trip or leaves children with a nanny. Modern tracking indicators will not only record everything that happens in the apartment in the absence of the owner, but also notify you of any changes.

The principle of operation of the system can be described in several steps:

1. A Rostelecom subscriber purchases one of the Smart Home kits in a convenient way.
2. Independently or with the help of a specialist installs and configures system equipment.
3. The video camera and special motion sensors respond and record the events that occur.
4. The Smart Home controller transfers the recording to the cloud for storage.
5. The user is viewing the saved record.

Basic kit

A nice feature of the product is the ability to view the camera recording not only after saving it, but also in real time. All that is required is to register in the Personal Account. For those who are used to using smartphones for work, it is provided mobile app.

Other features of the Rostelecom Smart Home system include:

• online video broadcasting is made from only one camera;
• it is possible to connect additional devices that are not included in the purchased kit;
• the extended package includes the “Smart Bulb and Socket” services, which will allow a Rostelecom client to turn off electrical appliances directly from their smartphone;
• with the help of smoke and leakage sensors, you can not be afraid of an accident;
• the option of SMS - informing is connected separately through the Personal Account;
• sensors must be located at a distance of no more than 7 meters from each other and from the controller.

It should be noted that although the equipment for the Smart Home program is powered by electricity, each device has an internal battery that will allow you to continue recording even if the lights turn off unexpectedly.

Complete set of the "Smart home" system

Rostelecom currently offers three sets of equipment for purchase:

Includes a controller, motion sensors and a door and window opening tracking system.

extended

The kit includes: controller, opening and movement sensors, smoke and leakage sensors.

Control

Contains basic devices (without smoke and leakage sensors), as well as a smart socket and a light bulb.

Description of sensors

To understand how each of the devices works, you need to familiarize yourself with brief description each sensor:

Controller

The main mechanism that controls all devices connected to it. It also transmits data.

Opening

If windows or doors are opened, it will send a message to the smartphone.

Leak, smoke, gas

Detects the first signs of a leak or fire through a change in temperature and the level of smoke in the apartment.

Movement

Turns on if there is any movement in an empty room.

Smart light bulb and socket

Allows you to control the equipment remotely via a mobile phone.

Note!

The cost of connecting the informing service via SMS is 60 rubles per month.

You can purchase equipment on the official website of Rostelecom, at the company's sales offices or in digital electronics stores Svyaznoy, M.Video, Yulmart.

As mentioned earlier, the configuration of the "Smart Home" system can be supplemented by the client independently at any time. The main thing is not to forget to add the device in your Personal Account, and make all the necessary settings.

Cost of equipment

The cost of the "Smart Home" kit may vary slightly depending on the region of residence of the subscriber. Current prices can be found on the company's website at the link: https://rt.ru/smart_house/tariff

On average, you will have to pay for devices:

In addition to the kit, you can purchase sensors under the "Management" program:

Sensor name	Cost, rub.)
movements	2 990
strip	3 490
Opening windows and doors	2 890
leaks	3 490
smoke	3 490
smart socket	2 390
smart light bulb	2 890

To install and properly connect the Smart Home kit, you must use the instructions that come with each kit. If you cannot do the work yourself, you can seek help from specialists. To do this, you need to call 8 800 100 08 00 and inform the operator of your desire.

Important! The service is provided for a fee, its cost is reported personally to the client when making an application.

How to connect to the personal account "Smart Home"

You can manage and configure sensors yourself, for example, turn off an unnecessary one for a while, or set a time to turn on another one. Optimization of device operation is carried out through the Personal Account. To register in the system, you must perform the following procedure:

1. Open the link https://lk.smarthome.rt.ru/login in the browser.
2. Go to "Registration".
3. Specify personal information(what is the name, where the subscriber lives, mailbox address and telephone number).
4. Confirm the desire to register with a short code from the SMS message.
5. Create a complex login password.

This completes the authorization, but in order to manage the equipment, you need to add it to your account. To do this is quite simple, through the special command "My devices". In the required fields, you will need to mark the data of the sensors, and wait for the end of the connection process.

After all the actions taken, the user will have access to all the features of the Smart Home system. Each section of the menu contains tips and advice, which makes working with the Personal Account convenient and easy to use.

The main equipment control room, as mentioned earlier, is posted on the official Rostelecom page on the Internet. But users also have the option to download the program to their smartphone. To do this, you need to go to the application store of the installed operating system of the gadget, and enter the name "Smart Home" in the search bar or download from the links below.

After the resource finds the desired application, you must click the "Install" button and wait for the download to complete. To enter the mobile account, the data specified earlier when adding devices to the system is used.

According to reviews posted in the public domain, the Smart Home product from Rostelecom is popular and has already found its fans. And although some problems with the work still happen, the company is carefully working to improve it. This allows us to say that soon the number of people using the service will increase significantly.

Rostelecom launched a very significant project, the Smart Home, into commercial operation. This can be considered the first and biggest swallow after the start of reorganization into a digital service provider, since the “house with brains” is our near future, and the concept of “Internet of things” has become almost a trend in the digital sphere. How the Video Surveillance service is organized (in the regions it may be called Videocomfort), how much it costs and what its innovations are, we will describe below.

What it is?

Service "Smart Home" - "Videocomfort" is an intelligent video control service for premises, houses, apartments. This is not just a standard shooting, recording and viewing of events. This is a whole set of widgets, tools for managing, controlling and configuring the behavior of installed cameras. It is to observe what happens in your absence at home from anywhere in the world where there is at least Mobile Internet, not to mention home or public Wi-Fi, from any mobile or stationary device.

Why do I need video surveillance? Examples of using?

I leave the child with the nanny - the world already knows hundreds of precedents when a housewife not only did not fulfill her duties, but also brought moral and physical harm to those whom she should cherish and cherish. Now you can control the workflow.

I have only children - If you are not rich enough to hire a governess during your absence from the apartment, then you can rely on a smart home. He will definitely not miss all the pranks of your children and will provide evidence later. It’s a pity that you can’t scold remotely ...

I am renovating a house/apartment Are you sure that workers with a southern accent are hacks? Does the quality and speed of work cause distrust? Under the lens of a video camera, the repair will go much faster - you'll see. Full control over all stages of work at home, sitting in the office? A dream that has become a reality.

I travel often - Protecting your own home while traveling is a real headache for many travelers. Alarms are expensive, video surveillance from Rostelecom is cheap. Motion sensors will detect changes if someone tries to enter the house. Record video and save to the cloud. In addition, it has built-in protection mechanisms such as vision blockage notification, camera power off, etc.

I have frequent business trips This point follows from the previous one with the only difference that during a business trip your wife may stay at your house. And this means that an extra "chastity belt" in the form of a camera may not be superfluous.

My elderly relative lives with me - The most useful way to use the "Smart Home" service - "Video Surveillance" - is remote monitoring of the condition of your grandparents. Often, this is even the only opportunity to provide timely medical care if necessary. Therefore, it is important to look after your sick or old loved ones. Know that they are really okay.

I have pets - It's more fun than really necessary. Have you ever wondered what animals do in your absence? Or where do the socks go? Or who crap for the sofa? Now you can not only follow the pets with interest, but also upload the entry to social media or on Youtube, thanks to the recording and archive function.

“VIDEO SURVEILLANCE IS ONLY THE FIRST Brick IN THE MULTIFUNCTIONAL SMART HOME SYSTEM. WHY NOT START BUILDING YOUR SMART HOUSE OR APARTMENT RIGHT NOW?

What is the difference between the Rostelecom Smart Home and a simple video camera?

• Viewing the broadcast from the video camera in real time from a computer, laptop or mobile phone.
• Tampering notifications: view obstruction, camera power off
• Notifications about extraneous sounds and movements in the house
• Motion control with a special sensor
• Video recording. Storage and download. Video recording can be carried out not "by event" in the frame, but constantly in non-stop mode, 24x7.
• Viewing archived videos. Weekly videos will be stored in the cloud. You can always download the necessary records to your PC. The shelf life is 7 calendar days.
• You do not need to download the recordings to your PC - it is possible to create videos that are 30 minutes long without even saving the file to physical media - you can create up to 5 videos that you can watch directly through your personal account (note that the videos are stored while the recording itself is on the server - remember that they "live" for a maximum of 7 days. So, if you need a recording for a longer period, it's better to save it to disk / flash, etc.)

Connection and payment

The connection of the service, the purchase of a camera and registration in the system takes place at: https://lp.smarthome.rt.ru/ in the "Registration" section. Subsequently, you will be able to log in through this portal to manage and configure the service. Here on the site you can immediately purchase a camera.

Rates

0 rubles / per month — when buying a camera for the full price (4999 rubles). Those. a one-time payment will be 4999 rubles, then a year (12 months) you will not pay anything. Starting from the 13th month - 300 rubles per month.

300 rubles / month — when buying a camera in installments for 24 months. Those. you just pay 300 rubles a month for the service and for the camera, gradually redeeming it. But with this payment choice, you will not be able to change the tariff until two years have passed

By default, the tariff includes storing video of events for 7 days, recording the broadcast of the last 30 minutes and the ability to create 5 videos of 30 minutes each (for more details, see the "Functionality" section above).

How to pay for the service?

You can pay for Video Surveillance in the same way as for all other services of Rostelecom - through the personal account of the service in the item " Settings» or by going to your personal profile:

Camera. Everything you need to know about the camera

Video camera model used by Rostelecom: Ds-2CD-VC1W.

Specifications:

Purpose: indoor
Video sensor: 1/4'' Progressive Scan CMOS
Minimum illumination: 0.01 lux at F1.2 with AGC; 0.028 lux at F2.0 with AGC; 0 lux with IR
Camera Lens: 2.8mm at F2.0
Viewing angle: 92.5°
Maximum resolution: 1280×720
Auto Brightness: yes (Digital WDR)
Day/Night mode: IR illumination with automatic on/off
IR range: up to 10 m
WiFi: IEEE 802.11b, 802.11g, 802.11n; frequency 2.4GHz ~ 2.4835GHz; throughput 20/40 MHz
Microphone: built-in
Ethernet interface: absent
SD card: up to 128 GB
Camera Power: DC 5V ± 10%
Power Consumption (Max.): 4 W
Dimensions: 70.6 x 116.7 mm
Weight: 300 g

Description:

This is a Wi-Fi HD indoor camera. The camera only works with WiFi connections. An Ethernet connector for cable connection is not provided. Has a wide viewing angle, built-in microphone, infrared-illumination, built-in motion sensor. It is possible to change the angle of the camera.

Where to buy it? What is the price?

It can be purchased at service centers (when the service is available in your area), or on the website https://lp.smarthome.rt.ru. Price: 4999 rubles. Installment - 300 rub/month. More details in the "Tariffs" section above.

Indicators

Blue indicator: Lights up when the camera is turned on—Device booting. Lit during operation—The camera has successfully connected to the Wi-Fi network.

Red indicator: Blinking - The camera is waiting to connect to a Wi-Fi network.

How to set up and connect the camera?

The camera is configured and connected through the www.smarthome.rt.ru portal using a special QR code, or through the serial number of the camera. To do this, go to the site, select "My Devices" and click "Add New".

Connect the camera to power and wait until you hear a beep and the light on the camera starts flashing red (should be blue while the camera is booting up). Then in the add camera window select "Blinking Red"

The next step is to confirm the QR code. Click "I'm ready to show the QR code." Next, show the QR code to the camera from a distance of 10-30cm and wait until it says "QR code recognized", then click "QR code recognized".

Connected cameras can be seen in the "My Devices" section. You can also connect the camera via serial number (enter manually). The number of connected cameras to Smart Home is unlimited. Minimum speed for camera operation: 512 kbps.

Nothing works for me!

First of all, we check

1. Turning on the POWER of the camera
2. Proper Wi-Fi mode (Camera only works at 2.4 GhZ)
3. Carefully check that the serial number is entered CORRECTLY when adding the camera.
4. Check the AVAILABILITY of the Internet via Wi-Fi. Does the phone or laptop under this network go to sites, does Skype work, etc.
5. Try resetting your camera.
6. If the QR code is not recognized, then try to SLOWLY gradually move it away from the router code at a distance of up to 30 cm. Be sure to check that the QR code is in the center and is well readable (add more lighting)

Registration via mobile app. Camera control from your phone

Registration in the application

Downloading the application through the app stores AppStore(https://itunes.apple.com/ru/app/smart-home-rostelecom/id1205946608?mt=8) or Play market(https://play.google.com/store/apps/details?id=en.rt.smarthome&hl=en). Applications for Windows Phone|Mobile- No. We go into it and click "Registration". Next, enter your email address and phone number.

Then we enter our full name, after which we need to come up with a password for ourselves:

After clicking "Register", an email will be sent to your e-mail with a link to confirm registration. You need to go through it to activate your account. If you didn't receive an email, check the Spam folder in your mailbox. The link will only be valid for 24 hours.

Adding a camera through the mobile app

The camera is connected exactly according to the same scenario as through the www.smarthome.rt.ru portal. All the same steps as described in the section "How to set up and connect the camera"

Modern man is no longer satisfied with the opportunities offered to him.

Recording the intrusion is not the only thing that plays a role in home security. It is important to detect various emergency situations.

For example, water leakage due to burst pipes or the presence of smoke, which indicates a fire. Also, useful , windows, glass breakage.

Until now, there were two separate systems - video surveillance and security. However, today the Rostelecom smart home kit combines all the features in a single structural solution.

Features of the smart home system from Rostelecom

The main feature of the Rostelecom smart home system lies in the maximum flexibility of construction to cover the widest possible audience of consumers.

1. There is a choice of split packages, kits for video surveillance and security systems.
2. To connect a subscriber, the Rostelecom smart home system allows you to use the lines of any Internet provider.
3. , security controllers, any of the target kits offered on the market can be purchased in personal possession immediately by paying the full price. It is also possible to rent devices. In this case, the user must obey a number of mandatory rules.
4. The Rostelecom smart home controller comes in two basic packages that offer different sets and security options.
5. Unlike other offers on the market, the Rostelecom system offers streaming video recording 24 hours-7 days. There is no difference in the cost for the user, the data is stored on cloud servers for a week.

Today, it is not difficult to acquire the necessary set of equipment. The cost of services is quite attractive, and for those who buy cameras or controllers with a set of sensors paying full price, special conditions are offered.

Connecting a smart home from Rostelecom

In order to use Rostelecom's smart home video surveillance or a security sensor system, you need to register on the company's website.

All operations for setting up and connecting services are not difficult.

They are available through the Rostelecom smart home personal account - this is where the data of the camera, controller are indicated, access to the archive of video recordings is opened.

Wiring diagram for the Smart Home system from Rostelecom

Those who use mainly a smartphone or tablet are offered software, designed for Android, MacOS. With its help, a new user is registered and access to setting up and activating devices is opened.

Detailed step by step descriptions all procedures for the physical connection of equipment are contained in the Rostelecom smart home instruction.

When installing security sensors, it is enough to follow simple recommendations, the list of which is supplied in the corresponding set of devices.

Equipment used (connection and setup)

Smart home from Rostelecom is offered in the form of three sets of equipment for the most flexible system construction with the capabilities necessary for the user. Each of them has simple technique connections and settings.

The first, independent package is designed for video surveillance. The other two allow you to ensure the safety of the home with the help of sensors.

These kits have the same controller, Z-Wave.Me Hub, which provides connection to the router using a cable, communication with sensors via a radio channel.

The Basic and Advanced sets differ in the number and types of detectors for emergencies, humidity, leaks, and door opening.

The smart home service from Rostelecom is a convenient interface for setting up and connecting devices on the company's website. To activate the camera, you need:

• register on the site lp.smarthome.rt.ru to access personal account if it hasn't been done before;
• go to the My devices section and press the on-screen button Add new;
• Rostelecom servers will begin the process of registering the device in the system, all this time the camera indicator is blue, after finding it - red;
• in the device registration window, you need to confirm by pressing the button that the indicator lights up in red;
• data must be entered wireless network(access point name and password);
• when a QR code is displayed on the screen, you need to bring the camera to a distance of 10 to 30 cm.

After identification and transmission of identification data, the device is registered in the system with the activation of all options. The process of how to connect a Rostelecom smart home camera - provides for a situation where the user cannot recognize the graphic code. In this case, the serial number of a specific device is entered into the system, indicated on its case.

CCTV Cameras

Smart home video surveillance by Rostelecom is a DS-2CD-VC1W camera, with a complete set of power supply and floor or ceiling mounting elements.

Surveillance camera system Smart Home Rostelecom DS-2CD-VC1W

The characteristics of the monitoring device look like this:

1. 1/4 inch matrix, picture resolution up to 1280x720 pixels, video up to 25 frames per second;
2. optics with focal length in 2.8 mm;
3. viewing angle 92 degrees;
4. built-in;
5. minimum illumination for color video filming - 0.01 lx;
6. built-in IR filter;
7. 3D noise reduction;
8. the ability to work with memory cards up to 64 GB;
9. permissible operating temperatures from -10 to 60 degrees.

The camera that comes with the Rostelecom smart home video surveillance package is designed for wireless connection to a router. The device is compact, but users note the inconvenience of mounting it on a ceiling or wall, choosing a flat horizontal surface as the most convenient installation site.

Motion sensors

Considering how a smart home from Rostelecom works, it should be noted that the ability to detect movement is available in all proposed sets of equipment.

• In the Video Surveillance package - available in the camera.
• The security packages Basic and Advanced include stand-alone Philio PST02-B sensors.

It is especially worth pointing out that security package detectors provide advanced security features - they can be installed in the most critical places, regardless of the location of the controller or camera.

Water leakage sensor

The water leakage sensor is included in the Advanced security kit. Its brand is PAT02-A, this device from Philio brand has the following functions:

1. liquid leakage control;
2. determining the level of humidity;
3. ambient temperature measurement.

The sensor is fully compatible with the Z-Wave controller, specially designed to work in its network.

Data processing speed guarantees fast determination notification emergency, thanks to the 500 series chip.

The device works autonomously, powered by a battery. To indicate its low charge, light and sound indication is provided.

The smoke detector is also included in Rostelecom's advanced smart home security package.

The device is built on a productive chip of the 500th series, provides an increased power level for signal exchange.

Smart home smoke detector

The sensor is easy to install, has a built-in audible alarm, low battery alarm.

Window and door opening sensor

Window and door opening sensors are included in both security packages from Rostelecom, Basic and Advanced.

As a small drawback of the kit, it can be noted that only one device is offered.

Sensor for opening windows and doors of the Smart Home system from Rostelecom

But - users interested in controlling more doors and window sashes can purchase additional sensors and connect them to the controller.

Application

Convenient software is offered for users of mobile devices. The Rostelecom smart home application provides an intuitive interface, simple registration and full functionality similar to the service website.

Setup and management

Initial registration in the application, in fact, means registration on the site to access your personal account. If the user has already gone through this procedure, it is enough to indicate their data in the application.

The process of further configuration is not difficult. You must choose to add a new device (camera or security recorder) and follow the instructions of the program.

A feature of the software from Rostelecom is the most detailed step-by-step instruction. The program generates a complete list of sequential instructions for the user, starting from turning on the power and connecting devices to the network.

After connecting the security controller, the owner can add sensors through the appropriate section of the application.

As a feature of the software package, it can be noted that the list of available devices includes not only event detectors, but also light bulbs controlled by power sockets, which hints at the expansion of smart home capabilities in the future.

Service tariffs

For those users who have purchased one of the proposed equipment packages for the full price, Rostelecom offers free use of the smart home service throughout the year. Upon completion, the smart home will cost the owner 300 rubles a month.

Kits cost:

• video surveillance - 4990 rubles;
• basic security - 11,590 rubles;
• advanced security - 17,000 rubles.

All offered equipment can be rented in installments for 24 months. In this case, the cost increases, but the user has to pay quite a reasonable amount every month.

However, in this case, payment for using the smart home service is 300 rubles per month. Also, you can not change any terms of service for 2 years.

Conclusion

Smart home from Rostelecom is a convenient service. With its help, you can set up an arbitrarily complex system using functional and reliable hardware solutions, which in some way justifies the price tags for the proposed kits.

The undoubted advantage of a smart home is the ability to use the services of any Internet provider, without any restrictions in terms of the type of connection: wired, wireless, 3G.

Therefore, the demand for the service, upon careful consideration and analysis of the possibilities, may well be very high.

Video: Rostelecom presented "Smart Home"