Birdhouse from a juice box. Decorative birdhouse with your own hands. What are the dimensions of the correct birdhouse

Many owners of their personal plots spend a lot of energy on the fight against harmful insects. In order to somehow make your life easier, you can attract starlings for these purposes. They mercilessly destroy not only caterpillars and beetles, but also their larvae. Thanks to such help, the summer cottage is completely cleared of these pests in a week. To attract such useful bird, you need to make a house for her. For this, various improvised materials are used, for example, a plastic bottle, cardboard, box and others. Various options for birdhouses can be seen in the photo.

Necessary materials

The lightest and most affordable material is a plastic bottle. To make a birdhouse out of it with your own hands, you will need the following tools and materials:

drill, drills;
stationery knife;
pliers;
2 l plastic bottle;
waterproof acrylic paints (dark brown, beige, light brown, black and dark green);
unnecessary CDs;
glue for plastic items;
wire;
brush or sponge for applying paint;
scissors;
tape, tape.

These materials can be easily found at home.

How to make a birdhouse from a plastic bottle?

It is necessary to take an ordinary plastic bottle with a volume of 2 liters. A sharp clerical knife makes a round hole at a distance of 3 cm from the bottom. A little below this hole, drill a small hole with a drill and insert a long dowel into it. This is the future perch for the bird. After that, the bottle is painted in two layers of brown paint. Starlings like their house to be cozy and dark, so the birdhouse from the bottle is painted over very well, without any gaps.

Then they take a bottle cap and drill two small holes in it, thread a wire through them and twist the ends well. The result should be a strong loop, with which the house attached to a tree or pole.

Thus, the birdhouse from plastic bottle ready. To make it more beautiful, you can decorate it.

How to decorate a birdhouse

To decorate a birdhouse, they take paper or thin flexible plastic and make a window stencil out of it, the image of which will fit perfectly into the birdhouse. Then you need to make a beautiful roof. To create a type of tile, a CD is heated and cut, and this is done in such a way that identical pieces are obtained. Each piece can be painted with brown paint, and for greater effect, the tiles are made multi-colored.

Now you need to attach a roof to the house. The lowest layer is "planted" on the glue, and for strength, each piece is fixed with adhesive tape. Then all subsequent layers are fixed only with glue.

To make a birdhouse from a plastic bottle more comfortable, the bottom is covered various materials , such as:

rags;
twigs;
pieces of cotton;
hay.

You can be sure that the birds will appreciate such comfort.

Making birdhouses from other materials

Cardboard bird house

In addition to plastic bottles, a birdhouse can also be made from cardboard. For work you will need:

self-adhesive paper with a laminated coating;
starch;
corrugated board;
twine.

In addition, you will need tools such as scissors, a ruler, a pencil, a cardboard cutter, a square and compasses.

Work begins with the fact that on all blanks markup is done. Then the parts are cut in duplicate. A paste should be cooked from starch, since ordinary synthetic glue has an unpleasant odor that can scare away birds.

Finished parts are glued in pairs to make double walls. This is necessary for their strength. In the front wall, a hole should be cut for the notch, and in the back, 4 small holes are made for the twine, with which the birdhouse is tied to a tree.

The walls are glued end-to-end with each other in compliance with a right angle. The result should be a box. During drying, it is wrapped with threads. The roof is glued in two parts. The smaller part is placed inside the structure, and on the larger one, allowances are made on all sides.

A cardboard birdhouse can last longer if it is glued on the outside with laminated paper. The surface is completely pasted over, the result is a very beautiful birdhouse.

bird house out of the box

If it is not possible to find basic materials, a birdhouse can be made from a finished item, such as a box.

In this case, you need an empty juice or milk container more than one litre. It should be washed and dried, and then a standard notch is cut out. To strengthen the bottom, use thick cardboard or wood. Holes are made on top of the box to be used for wire. With the help of it, a birdhouse is hung on a tree. Outside, the house is pasted over with beautiful paper with a protective coating.

Before you start making a birdhouse with your own hands, you should protect yourself from getting all kinds of injuries. In order not to plant a splinter, be sure to use gloves.

The roofs of the houses are made single or gable, with a slight slope back. Birds are afraid of bright colors, so the coating should be dark tones.

Birds like their nests to be very high off the ground. Before hanging a birdhouse on a tree, you should make sure that this place is safe, and trunks are thick and strong. It is best if the house is not conspicuous, because while hatching the chicks, extra attention to the birds is useless. The birdhouse can also be attached to tall metal poles.

Thus, by making a birdhouse with his own hands, a person not only benefits the birds, but also himself, since starlings are able to destroy a large number of harmful insects in their summer cottage. A house made from a plastic bottle, if made cozy, will give the birds real pleasure.

Birdhouses are an invention of civilization. Until recently, birds, even without a person, found shelter for themselves, in which they can lay eggs, hatch them and hatch chicks. But the situation has changed: there are practically no hollow trees, especially in the city. It became difficult for birds to find nesting places and people figured out how to help them. They invented analogues of natural nesting - these are birdhouses, titmouses and houses for other birds that you can make with your own hands.

How to make a birdhouse with your own hands at home

Birdhouses are the most popular indoor bird nests. Starlings need this house not for living, but for breeding. Therefore, it has a number of specific requirements.

Requirements for the right craft for birds

Safe for birds;
Convenient for laying eggs and hatching chicks;
Warm enough but with good ventilation;
With a tray of the appropriate size.

Materials for manufacturing

What are bird houses made of at home? Most best material came up with nature - this is a tree familiar to birds. Practical houses should not be made of chipboard, fiberboard, drywall, soft cardboard and other unsuitable materials. Wooden structures can stand for a long time, while paper, lining and cardboard quickly collapse under adverse weather conditions.

Boards are better to take hardwood. Coniferous - not the most suitable material. They secrete resin and make the bird's habitat sticky and dangerous to the birds. Resin can stick together the plumage of birds, and this is fraught with diseases and even death of birds. But you can hang a birdhouse on any tree in your country garden or in the yard. Here the birds do not care where to live, the main thing is to be warm and protected.

For decorative birdhouses, which are installed in places protected from wind and rain, boxes, bottles, cardboard and other materials are used.

Designs, shapes and diagrams of the device

All birdhouses can be divided according to the schemes into two groups:

Houses of various forms;
Duplyanki.

A traditional birdhouse is a rectangular box with a flat, single-pitched or gable roof and a round hole-notch. The size of the notch depends on who will live in the house.

Dimensions

Height: 30–40 cm;
Bottom length and width: 14–16 cm;
Notch diameter: 5 cm.

If these dimensions are reduced, and a notch 3–3.5 cm in diameter is made, then a titmouse will turn out. Birds will settle in it, which daily eat insect pests and various larvae several times more than their own weight.

How to make according to drawings

It is necessary to build a house, as it should be, otherwise it will simply fall apart from the first gusts of wind. It is important to respect the dimensions. In a house that is too small, the birds will be crowded, in a large house it will be cold. Often a perch is made in front of the entrance - a perch. Birds rarely use them.

It is especially important to observe the correct size of the notch (inlet). It should be such that a bird can freely pass there, but predators - cats and crows - cannot get into it.

You can make a birdhouse in the form of a hollow. To do this, use a part of the trunk of a deciduous tree and hollow out the core in it. From above and below, the hollow is closed and a notch is made in the side wall. Such a house will remind the birds of a natural hollow.

How to make from wood

Boards made of alder, birch and aspen are suitable for nesting. The inside of the house should be rough. Smooth boards need to be processed with a chisel - apply horizontal notches. Chicks will be able to cling to these ledges and easily get out of the house.

In addition to the boards you will need:

Nails;
Joiner's glue;
Ruler and pencil;
Wood saw, jigsaw;
Chisel or drill;
Hammer.
Water-based paint and decorative elements.

Sometimes the houses are painted. Do not decorate them with bright colors, this can scare away birds.

Birdhouse made of plywood and lining on a branch

This is the simplest design bird house. The tools are no different from those used in working on a wooden birdhouse. Depending on which roof you have chosen for the birdhouse (single or gable), you will need 6 or 7 parts. So, we are building a plywood house.

Manufacturing steps:

Drawing. It is necessary to determine the dimensions, make a sketch, clarify the placement of the walls, cover, bottom and fasteners and start creating a drawing.
Cutting and sawing. First you need markup. All parts are transferred to plywood in such a way that the bottom overlaps the cuts of the walls, and the upper part acts as a visor. They cut plywood, adjusted for the width of the jigsaw and the gap.
Assembly of parts. All cuts must be sanded. You can connect the parts with glue and self-tapping screws. It is necessary to glue the side walls and the front facade. After the glue has completely dried, the structure is strengthened with nails or self-tapping screws. The back wall is nailed last.
Bottom and Roof. The bottom is screwed around the entire perimeter with self-tapping screws. The roof is better to make removable. This makes it easier to take care of the birdhouse. Once a year, you will need a general cleaning of the birdhouse from old nests, so the roof is fixed with only two screws. It should protrude 3-4 cm, forming a visor in front of the notch.
Birdhouse ready. It can be painted and decorated to your liking.

How to build a cardboard

Cardboard is not the most durable material, but birdhouses made of it also have the right to life. Cardboard is better to take dense. Binding cardboard works well. It holds its shape well and is easy to color and process. Choose non-toxic ingredients, because birds will raise their offspring in this house!

Cardboard birdhouses will not be durable, but if done correctly, they will survive the season.

To make such a bird house, you need to follow the following steps:

Sketch development. You need to make sketches and refine the dimensions.
Drawing and cutting. Depending on the chosen design, a drawing is developed. All dimensions are transferred to cardboard and cut out with a clerical knife or jigsaw.
Connection of parts. Assembly is carried out using wood glue. Its order is no different from the previous model.
Finishing processing. Even the best cardboard is afraid of moisture. Therefore, such birdhouses must be treated with special means. It can be protective varnishes and paints.

Out of the box (made of cardboard and paper)

Cardboard boxes can make life a lot easier for bird lovers. Birdhouses are made quickly and do not require special tools.

Manufacturing steps:

Decide where in the birdhouse there will be a notch, and make a markup.
Cut a hole at the marked location. Treat the cuts with moisture protection.
Attach the roof. All parts can be connected with glue or tape.
Coat the birdhouse with varnish or paint. Beautiful painting colors your design. You can come up with interesting decor details.

bottle houses

Our industry offers such a variety of beverage containers that it's hard to resist reusing them. Plastic bottles are an interesting material not only for children's crafts, but also for such a useful thing as a birdhouse.

Manufacturing steps:

Training. Suitable plastic bottles with a volume of at least 1.5 liters. They must be clean and free of foreign odors.
Make a mark on the bottle. Mark the location of the notch. Cut out the hole with scissors or a knife.
Treat the sharp edge of the cut with tape or plaster.
Insulate and decorate the house with burlap, twine winding or thick yarn tying.
If desired, you can paint the house with acrylic paint. This will give rigidity to the structure and give it a finished look.

Unusual and original birdhouses from improvised materials

What kind of birdhouses you will not see today. Designers are developing entire collections of these unusual houses from improvised materials. Fans are not far behind. In the gardens you can see bird houses of the most intricate shapes and designs. For this, traditional and modern technologies are used.

The most popular types of original birdhouses are:

Wicker wicker houses. Birds like these birdhouses. They are made from environmentally friendly materials. Fans of weaving from paper tubes can also use their skills to build a bird house.
Cork houses. For this, wine corks are used. The material is durable, tolerates precipitation well. The only negative is the complexity of the assembly. Therefore, it is used in combination with wood or plywood.
Barrel-birdhouse. Small barrels in their shape resemble hollows and are perfect for a bird's home.
Shoe houses. You will need a large boot, which is hung on a tree at the right height.
Birdhouse made of branches. For such a house, the branches are connected with self-tapping screws or twisted with a rope.
Pumpkin bird house. To do this, use a special utensil gourd lagenaria. They just make a hole in it for a notch.

Decorative and beautiful for the garden

Birds do not need painting. They may well get by with the simplest birdhouse. But for a person, a birdhouse is a space for creativity. Here they appear interesting ideas for decor.

How to decorate a birdhouse? Acrylic paints are used for painting. The birdhouse must first be treated with a primer.

You can make a whole series of "Seasons" and display changes in nature on the walls of the bird house. For those who do not know how to draw, applications and decoupage are suitable. Just do not forget this beauty is covered with sweat varnish.

New Year's birdhouses

Such houses decorate the gardens during the January holidays. Birds do not nest at this time. But the birdhouse can be used as a feeder. And in the spring this design will turn into a real nest. You can decorate New Year's birdhouses with branches of needles, berries and other materials, but only natural ones!

How to hang a house?

You need to attach a bar to the back of the house, with the help of bark it will be hung on a tree. It is advisable to hang it vertically evenly or tilted forward. If wire is used for this, then it should be at least 2 mm thick, it is better to take stainless steel. You can hang birdhouses at any time of the year, but it is better when the birds return - in the spring.

Video

On the video, different options for bird houses:

Outcome

Birdhouses installed in the garden lure different birds. Do not be discouraged if they do not immediately settle in your house. Sometimes this takes time. Use a simple birdhouse base and use all your imagination when creating decor. Your efforts will be appreciated not only by winged friends, but also by neighbors, and even more so by a garden that will thank you with a good harvest.

To attract birds to the site, feeders and birdhouses are successfully used; with their help, you can not worry about the safety of the future crop. Almost all types of birds are settled in such houses. In the cold, they eat wintering caterpillars, in summer - pest larvae.

You can make a birdhouse with your own hands without spending money from your pocket. After all, it is not necessary to buy new building materials, it is enough to turn on the fantasy using improvised means.

Household materials

One of the easiest options is a birdhouse out of the box. For its manufacture, a juice box is used, it is thoroughly washed and dried. Dignity this decision consider: economy, original appearance and ease of execution. From the materials you will need:

clean box;
thin wooden planks;
acrylic paint;
rope;
glue.

It is worth preparing the following tools:

scissors;
brush.

Work begins with the manufacture of a tap-hole, it should have a diameter of 5-6 cm, while being located at an average height from the bottom of the box. Cut a hole will help a regular or clerical knife. Next, the birdhouse is covered with paint, left to dry.

You can use an ice cream stick to make a perch for the birds to sit on. It is glued to the base under the notch.

The interior space in the birdhouse should also be comfortable for the birds, so the front wall from the inside needs to be roughened. Therefore, a plank of raw wood is fixed there, a piece of bark from a tree is also suitable. The outer walls are also pasted over with ice cream sticks - this will add aesthetics and allow birds to cling to their paws.

To hang a birdhouse on a tree, a hole is made from above, a rope is passed through. To attract birds, it is enough to pour a little food, then a family of birds will definitely settle in the house.

A large plastic container can be used as the basis of a birdhouse. When making a birdhouse from a bottle, the process will practically not change, you just have to make drainage holes at the bottom.

Cardboard is practical

To resettle the largest number of birds, it is worth making a birdhouse out of cardboard - this is the most affordable material. The resulting house can serve as a decorative element of the garden or be used for its intended purpose. The execution process is very simple, it does not take much time. During the work you will need:

two A4 cardboard sheets;
colored paper or paints;
compass;
scissors;
rope;
small stick.

As a blank, they look at the drawing or make it according to simple recommendations.

The basis of the future design is a sheet glued into a roll, you can take the rest of paper towels. A circle with a diameter of 4-5 cm is drawn on it with a compass, a hole is cut out. Next, the bottom is closed with a circle of the appropriate size - the base of the birdhouse is ready. To attract attention, it is decorated, it can be pasted over with colored paper or painted.

The manufacture of the roof begins with cutting out a semicircle, then glue the straight edge. A thin rope is glued to the top of the dome, connected to the base. It remains only to glue the stick near the notch and pour the food. Such a feeder can receive guests for a long time or simply decorate the garden.

Wood - standard manufacture

There is a traditional option for making a birdhouse out of wood. The process uses:

boards (20 mm thick);
nails;
hacksaw;
hammer;
drill;
pencil and ruler.

From wood materials, it is precisely an unplaned board with a thickness of at least 20 mm that is chosen. This ensures the preservation of heat inside the house. As for the breed better fit birch or oak, the smell of pine needles strongly repels birds. The use of pressed or glued wood is undesirable - it is not a practical option with a toxic smell.

After choosing the material, the dimensions of the structure are determined. Based on the parameters of a natural hollow (120x120 mm), it is worth making the bottom of a birdhouse 120x120 mm, the height should be 250-350 mm. Such dimensions allow you to accommodate a family with 5 chicks. With a larger number of offspring, adults cannot provide them with proper care. The size of the notch is also taken into account, a hole of 40-50 mm is made for the starling, titmouse - 30 mm. The letok is placed at a height of 200 mm from the bottom level.

A perch is fixed in front of the entrance to the house, sometimes a small platform from the board is installed instead. The roof can be gable or single-pitched, but one point should be taken into account - the board should protrude at least 50 mm beyond the level of the facade. For the convenience of annual cleaning, the roof is made removable, then it is fixed with screws or wire. All dimensions of the elements can be seen in the drawings.

Before you make a birdhouse with your own hands, you should carefully consider the diagram, then, according to the parameters in the image, cut off the boards. Process flow:

To make a good birdhouse out of wood, you should be guided by the recommendations:

to seal and preserve heat inside the structure, it is worth smearing all the cracks with clay or sealing with tow;
the surface of the wood should not have large burrs that will injure birds;
you need to use not long nails or self-tapping screws so that they do not stick out;
as a protective coating, it is better to treat with drying oil. But for decor, you can use oil paints in gray or red.

It is not difficult to make a bird house on your own, if you connect your imagination, the result will become a real decoration of the garden. In the process of making a birdhouse from improvised materials, the most unpredictable options for the base can be used: pumpkin, stone, coffee pot, shoe.

House installation

In addition to manufacturing, the process of installing a birdhouse is important, so you should know the recommendations for its placement:

You can make a birdhouse at any time of the year, but it should hang on a tree in late March - early April. Then a family of birds will definitely settle in it.

Winter has always been and remains a difficult time for birds. Day by day it is getting harder and harder for these little animals to find food. Think about birds and place a handmade feeder in your yard, because any materials at hand that we usually throw in the trash are suitable for working with. The article will present ideas and photos of ready-made solutions, the implementation of which will not require complex drawings or any special skills.

DIY birdhouse

Think for yourself, because it is impossible to imagine all the splendor of the surrounding world without birds and fervent trills. By their nature, these animals fill everything around them with harmony and life, and therefore even a tiny garden will look much nicer if there are birds in it.

By placing the feeder in the countryside, you can daily observe the secret life of birds and the fascinating bird bustle. Some of them will enter into fierce competition with other species, others will try to defend their own rights in the fight against relatives. But all of them always carefully look around, so as not to miss the moment of the attack of any predator.

The bird feeder can be assembled by hand from the most different materials. However, there are certain general rules to be observed during assembly:

It is best to place the feeder on the wall of outbuildings or directly on the branches of trees. At the same time, the placement height should be at least half a meter, so that it is convenient for you to feed the birds, and so that the cats cannot climb to them.
For small birds, the birdhouse should be made of appropriate dimensions so that larger animals cannot get inside.
The corner walls of the finished structure should not be piercing and sharp.
Better if construction material, from which the bird feeder will be made, will have good resistance to adverse conditions and moisture. Otherwise, the birdhouse will not be able to last for a long time, and it will have to be replaced.
Provide special sides and a roof in the design of the feeder that will protect food and birds from wind, rain and snow.
And most importantly - the feeder itself should always remain convenient for feathered animals, so that it is easy for them to take out food!

Advice! Do not forget that the birds remember the place of constant feeding, and therefore they are ready to fly a long distance to the right place - in our case, the feeders. Based on this, feeding the birds must be carried out daily, otherwise they may die!

Plywood bird feeder

Of course, the feeder can always be purchased ready-made in the store, but it is better to make it yourself, besides, if it only takes a couple of hours. A plywood feeder can be made with a gable roof, flat or without it at all. It is also possible to provide a special bunker compartment if you know that you will not be able to accurately monitor the amount of feed inside. Naturally, drawings will be required for work, since the Internet is presented great amount developments with ready-made dimensions and dimensions for cutting. You will only have to decide on the solution you like.

Important point! Do not neglect the drawing: firstly, it will greatly facilitate and speed up the work. Secondly, this approach ensures that in the end you get exactly what is shown in the picture.

Determining with appearance future feeder, do not forget to take into account the bird population specific to your region. After all, for example, pigeons are able to eat all the stocks, leaving tiny titmouse without food. Based on this, it is recommended to make the opening in the feeder so that large birds cannot penetrate inside.

Required to work:

Bar with a section of 20 by 20 mm;
Plywood sheets;
Sandpaper;
Hammer;
Water based adhesive;
Electric jigsaw;
Nail.

Operating procedure :

First of all, all the elements are outlined on the plywood sheets, which are then cut out with a jigsaw. A square sheet of plywood with sides of 25 by 25 cm will serve as the bottom of the feeder. At the same time, the dimensions of the roof should be made a little larger in advance so that water during rain does not flow down onto the food along the walls.
To avoid burrs, the edges of the workpieces should be pre-treated with sandpaper.
We cut out 4 racks from a bar about 30 cm long.
If you want to make the roof lean-to flat, you should shorten a couple of bars by 2-3 cm.
We fix all the details with waterproof glue, after which we fasten the structure with nails. We attach racks to the bottom of the feeder, to which we fix the sides.
We fasten the roof to the racks with self-tapping screws.
We install a container for food, add food and watch the bird feast.

Wooden feeder: photos and ideas

Main advantage wooden feeder for birds is that such a design keeps its shape perfectly and can serve for a long time, which in turn is explained by the not low reliability and high characteristics of the tree itself. For self-assembly of the feeder, you will need drawings, as well as at least minimal experience in working with tools.

To assemble a wooden feeder, you will need a board about 18-20 millimeters thick.

Next, we will consider a variant of a simple design, which can be easily done with your own hands, using the place of the drawing simple photo. For work you will need: glue, timber for racks 2x4.5 cm, nails, for the bottom a piece of plywood sheet measuring 25x25 centimeters, self-tapping screws and a pair of sheets of plywood 22x35 cm for the roof.

Work order:

First of all, of course, the sides and bottom of the structure are assembled. The bars, fitted to the dimensions of the lower part, are assembled for fitting, the end sides are smeared with adhesive, after which we strengthen the fastening with self-tapping screws. As a result, we get a small frame. At the same time, it is recommended to make two parallel sides a little larger than the base, approximately 5 centimeters, so that later perches can be installed to them.
We fix the bottom of the feeder to the finished frame and nail it.

We fix 18-20 cm racks from the inside of the resulting structure.
We supplement the racks with rafters. To do this, we install a pair of bars at a right angle, strengthening the joint area with an additional bar. As a result, you will see a right angle with the same sides. You will need another similar part.

Important point! Fix the bars at right angles on the table, while it will be correct if the wide side is on the table, and the additional bar is on top!

Next, we fix the rafters to the racks with the help of self-tapping screws.
We fix sheets of plywood to the racks, which will play the role of a roof. If you have a wooden corner, you can use it by making a skate.
Do not forget about the elongated sides - glue sticks or bead to them, which will play the role of perches.

Thus, you can easily and quickly assemble a bird feeder with your own hands. The finished structure can either be hung on a wire by a hook by drilling several holes in the ridge, or placed directly on top of any pole in the area. Inside the house, the food will be perfectly protected from rain and wind, moreover, several birds will be able to fly up to the feeder at once. The birds will love this kind of cozy dining room!

Photo instruction

If your suburban area has a gazebo, then great idea will place a simple open feeder next to it. In this case, it will be sufficient to build the bottom and side.

If you want to cover the feeder with varnish or paint, you should use water-based formulations! This approach will protect the birds.

Birdhouse from a box or bag of milk or juice

A beautiful bird feeder can also be made from such simple things as a bag or a box of juice or milk. Moreover, even a child can make a birdhouse. For work you will need:

Stationery knife or scissors;
A box of juice or milk;
Marker;
Wire or nylon rope;
Adhesive plaster.

The first step is to precisely mark and cut small holes on opposite sides of the box. The lower part of the window should be pasted over with adhesive tape so that it is safe and convenient for the birds to fly out and take food from the feeder.

Using scissors, we make tiny holes under the holes, here later we will insert the cardboard rolled up with a tube, which remains from the holes made earlier. We put the rope or wire through the holes in the bent corners of the future birdhouse and tie it to the branch. Ready!

The finished feeder can be placed on a tree branch, since the structure will not swing much in the wind. Once again, feeding slots will contribute to this, which can be performed on adjacent sides, and not opposite ones. You can fix the craft more strongly if you attach a wire to one side of the feeder, tying it to a tree.

You can also make a beautiful birdhouse with your own hands from several juice boxes. In this case, it is worth cutting off the third part from the first workpiece by cutting a hole for the birds in front - the element will become the bottom of the feeder or fodder board. We cut the second blank along the sidewalls, leaving the upper part untouched. We combine the components in such a way that in the end we get a triangle. You can connect the elements with adhesive tape or glue.

Craft from small plastic bottles

1 option. Simplest

We cut a couple of small holes symmetrically on both sides of the bottle. What shape is up to you to decide, they can be both rectangular and square, rounded and in the form of an arch. Leave jumpers between the holes. The visor will cover your feathered friends from the rain, you can make it by making a cut with an inverted letter “P”, after bending the plate up.

The bottom of the hole in the new birdhouse should be covered with some material, whether it be fabric electrical tape or adhesive plaster - this will remove the pointed edges of the bottle, allowing the birds to sit comfortably.

At the bottom of the bottle, we make holes at the same level, so that after that you can place the stick in a horizontal plane - a kind of perch for birds.

You can place the finished bottle feeder directly on the tree by wrapping the jumper with rope, tape or any other material, as in the photo.

Make holes in the bottle cap by inserting the ends of the twine into them and tying them into a knot, thus obtaining a loop with which you can conveniently fix the birdhouse on a branch of any tree in the yard.

Option 2. Bunker feeder

A bunker-type bird feeder is advantageous in that food can be poured into it with a margin, up to several days. At the same time, as the birds eat part of the reserves, the feed will automatically be filled up.

For this design, you will need a pair of identical bottles. The first one should be marked with a marker, after which small holes should be made at the bottom, similarly to the first feeder, and the upper third of the bottle should be removed. From above we make a couple of holes at the same level - subsequently, twine or tape for hanging the feeder will pass through them.

In the case of the second bottle, you need to cut several holes in the narrowest place - it is through them that feeding for birds will fall out.

Do not make large holes, if necessary, they can always be expanded over time.

Finally, fill the bottle with food and screw the cork back in place, then simply place it in the rest of the first bottle. Ready!

3 option. spoon design

A hole is made inside the cork, where the twine is later inserted. After that, a couple more holes are made at the same level according to the dimensions of the spoon. The last hole is cut in the bottle itself, above the deep bowl-shaped area of the spoon. At the same time, it should be slightly expanded so that the birds can comfortably eat in the feeder. In the end, it remains only to fill the birdhouse with food.

A little advice! Moisture can accumulate inside the craft over time. This can be avoided by a simple solution: using a tiny carnation or a heated needle, make a few holes at the bottom of the bottle - this will allow moisture to leave as it accumulates.

Craft from a 5 liter bottle

Surely everyone has at least one 5-liter plastic bottle that is lying around. A bird feeder is quite simply made with your own hands from this material. In addition, the volume of the bottle will allow you to place much more food for birds inside, and well-made holes will make it possible to eat several animals at once!

Using a bottle as a birdhouse is a fairly quick and easy solution that even kids can do: just use wire or tape to place the structure on the tree and place a small supply of food inside. Of the devices, you only need a clerical knife or secateurs and, of course, the bottle itself.

It is worth making a hole depending on how the feeder is planned to be placed on the tree:

Vertically - 3 rectangles or a pair of square holes are cut at a distance of 5-7 centimeters from the bottom of the bottle;
Horizontally - a pair of large holes are cut from the side of the neck and bottom.

It is convenient to hang a future birdhouse for birds from a bottle by twine or wire by the neck. When choosing a horizontal placement option, a couple of holes are made on the wall of the bottle, where a rope is later passed for tying to a branch.

You can avoid swinging crafts if you place a quarter of a brick inside, which will make the feeder heavier. Load the feed from above and there will be no problems with rocking.

Bunker

If desired, a 5-liter bottle allows you to do it yourself with a bunker feeder. For this, in addition to the mentioned bottle, you will need a couple of one and a half liter bottles, a rope, a stationery knife and a marker.

Work order:

First of all, we mark future holes for bird entrances on the bottom of the workpiece. The ideal option is one large and a couple of smaller holes. The first should fit a 1.5-liter bottle.

At the same time, it is better to cut a large hole in the shape of an inverted letter “P”, with this approach, the visor bent up will cover the birds from rain and snow. As in the case of 1.5-2-liter bottles, the bottom of the edges of the openings should be sealed with some kind of material, for example, adhesive tape, to avoid injuring the birds on sharp corners.

Inside the smaller bottle, we also make holes in those places where it will touch the bottom of the 5-liter container. An additional hole will be required and just above the indicated place. Through them, as you eat, the food will wake up in the feeder.
Inside the lid of a 5-liter container, it is necessary to make a round hole so that, when fully tightened, the thread of the neck of the second bottle is visible from above.
We remove the top and neck from the second container to make a funnel. We put it on the neck of the bottle placed inside, after which we fasten it with a cork.
In this way, a beautiful and comfortable bunker bird feeder is obtained. All work is done simply and quickly with your own hands. It remains only to fill the new birdhouse with food and place it on a branch in the yard.

Having shown a little imagination, you can always make interesting and unusual crafts for birds from the same plastic containers, which will not only become a real find for birds, but also decorate the design of your garden well.

Using a shoe box

For self-assembly of a bird feeder, any material that is idle on the balcony can fit. Shoe boxes, food and utensil boxes can also come in handy!

Give preference to boxes and cardboard, having a laminated finish! Thanks to him, the finished feeder can last much longer.

The main advantage of a birdhouse out of the box is that the original blank already has a roof, walls and bottom. You just have to make small holes on the sides of a rectangular or square shape.

For work you will need: tape, a knife or scissors, as well as a nylon cord. As you know, cardboard cannot be called a durable material, especially when used outdoors. Therefore, it should be wrapped with tape, so that the feeder can last at least until the next season. After making holes on the sides and fixing a new birdhouse on a cord on a tree, fill the container with food, and the birds will not take long to wait.

So that the craft does not shake strongly with the wind, it is worth placing some pebbles or sand at the bottom of the box.

You can do everything differently. The lid of the box is placed perpendicularly so as to act as a stern stand, while the second part will act as a roof and side. In this form, the design is glued with adhesive tape for greater reliability. A pair of hooks are made from a piece of wire, with which the "ceiling" of the birdhouse is pierced. The hooks are twisted and bent from the inside. With the help of hooks, the bird feeder can easily be fixed on the branch, as shown in the photo. It remains only to put food and wait for feathered friends.

Video Ideas

The sounds of spring are cheerful drops, iridescent trills of birds returning home. Who doesn't love the scent of fresh grass and first flowers?

Friends! Hello everyone! I started our conversation by “inviting” you to spring! And all because today we will learn how to meet birds, we will talk,. Starlings flew in from distant lands and they have a family arrangement and joyful chants according to the schedule. So let's help them by making a house for birds and then all their songs will be for us!

Let's find out a few things:

What are the requirements for garden structures?
What can a birdhouse be made of?
What can be done child's hands?

And now let's talk about all this in more detail. And at the end of the conversation, I will share one design idea! So go ahead!

Photos of birdhouses from improvised materials are clickable:

Requirements for birdhouses

It is not necessary to wait for our crumbs to be given a task to school or in Kindergarten bring a birdhouse. An activity such as building a bird house can be very interesting and worth paying attention to without calling from outside. That's just to make it convenient for winged, we must take into account important factors:

Suitable dimensions;
Material;
Mounting system for a secure fit.

Dimensions. First of all, you need to understand that, although this garden craft will hang on the street near the house, which means it should also have the function of decorating the territory, we do it, first of all, for the convenience of birds. Otherwise, it will only be what decorates the garden. No birds will live in it. So, we take into account the dimensions of those winged ones for which we are building. But, if we start from the standard, then the height is 30-35cm; width - 15-17, and depth 13-15cm. Hole diameter 4-5cm.

materials. You can use not only traditional wood, but also unusual materials. What can be built from: from willow vines, from newspaper tubes, from wine corks, from plastic bottles, plywood, carton, etc. The main thing is that if you use wet materials, like cardboard, it is good to open it with varnish in 2-3 layers so that it is not afraid of snow or rain.
We fix the birdhouse. It is worth thinking in advance for what to fix our crafts and with what. For example, you can nail a board to the back. Either nail it or tie it to a tree or pole.

Our birdhouse from a bottle - video MK

My son and I made from an ordinary plastic bottle. Just paint with acrylics.

Video - cardboard birdhouse

Video - birdhouse from cans

Master class edible feeder - biscuits for birds

Master class birdhouse from OSB in the form of a rocket

The most common and most unusual birdhouses

When I look at Photo birdhouses that are on the Internet or someone posted on their social networks, I am surprised how beautiful they look and how creative ideas coming to people's minds. There is such a variety of shapes here: round, rhombuses, polygons ... And what colors are there! Someone does not paint, and someone paints under Gzhel. Other options include apartment buildings. And near some is attached feeder. It is also a very convenient option if you want the birds to settle next to you for a long time and delight you every spring.

I really liked the birdhouse from the teapot.

What is child support?

If it's all about gluing, for example if you're making a birdhouse from boxes, then the kids can participate in the process of designing, cutting and assembling. But, if the house is traditionally wooden, and the baby is too small, do not refuse his help when he gives you nails or non-sharp and not heavy tools.

Another option to make the craft unusual - original drawing. Give the little one a brush and paints, let him create! Such a birdhouse can be safely called a joint product.

A few more photo ideas - original, but also more capacious in time and effort birdhouses.

Blueprints

According to the drawings, you can make not only wooden, but also cardboard birdhouses. Even from twigs or newspaper tubes, a birdhouse is made according to the drawings. All images are clickable.

Next time there will be a master class on making a wooden birdhouse.

I really want to believe that now we will all look forward to spring, and the birds will not have to look for where to settle and breed their winged offspring. I hope you and your kids enjoy building and crafting! I think this is not the last time you show your Creative skills. And in the future, we are all waiting for others interesting articles where we will build something. So don't forget to subscribe so you don't miss any of our fruitful conversations! And don't forget to invite your friends. I think they will also be curious to learn and share their knowledge!

And that's all for today! Till!