Paintings on glass with acrylic paints. Amazing acrylic painting on glass for beginners. Ideas for creativity

0.0053629875183105

Stages of glass painting

The technique of painting on glass depends on what materials and paints are used. There are water-based and solvent-based paints, solvent and adhesive paints, firing crystals (fusion) and other image transfer methods. More information about the features of glass decoration is written on the description page , and in general terms, the process of creating a drawing can be expressed as follows:

1. Design development.This stage includes an analysis of the interior design style, the choice of decoration technique and the creation of an overall design solution. At this stage, photomontage is also used, that is, the creation of a 3-D model based on a photo of the interior in order to visually see how one or another element will fit into the overall style.

2. Surface preparation. Regardless of which technique is used, the glass surface must be thoroughly cleaned of dust and grease. You also need to monitor the cleanliness of the room where the painting is done, since when small dust particles get on the paint, tubercles or dents form.

3. Drawing a contour(laying) . The contour sketch of the drawing is usually printed on a 1:1 scale and placed under glass. A color version is also printed to facilitate color matching and the creative process.

4. Drawing an image. At this stage, the image is transferred to the glass. The sequence depends on the chosen technique (more on the different methods of painting on glass is written below).

5. Error correction.If air bubbles form in the paint or it goes out of the contour, all errors are corrected immediately, while the paint has not hardened. To do this, white spirit, rags, cotton swabs, tweezers to remove foreign objects (for example, villi from a brush), toothpicks to pierce bubbles and other improvised means are used.

6. Drying (firing) . After applying the image, you need to wait for the paint to dry. In some cases, firing of the product is required.

7. Lamination (optional) . For additional protection, a layer of varnish or a thin transparent film can be applied over the pattern.

The options for using glass painting are limited only by the designer's imagination and the general style in which the room is decorated. In addition to creating painted paintings, it is possible to paint mirrors, partitions, ceilings, niches, windows, interior doors, furniture and other interior elements. For more information about these and other options for using painting, see the menu.

Varieties of painting on glass

The most popular methods are painting on glass with sparkles, water- and synthetic-based paints, baking granules, flood paints. To create additional effects, designers actively use the back or end lighting of the glass. In this case, painting on glass with a texture looks particularly impressive, when glare of light plays in the depths of the surface, or painting with fluorescent paints. The main aspects of the application of different types of glass painting are given in the table.

	Painting on glass with water-based paints	As a rule, water-based paints are transparent. They can be mixed with each other, but it is not recommended to dilute with water (a special thinner is used to make them more transparent). After applying the paint, the product must be fired, after which it becomes resistant to cleaning agents.
	Painting on glass with synthetic-based paints	Solvent-based ink lays on the surface much more evenly than with water-based paint, so the surface of the picture looks smoother and glossier. Synthetic paints are used only for decorative purposes, contact with food is prohibited, especially during heat treatment.
	Painting on glass with granules for baking	Glue and multi-colored granules are applied to the degreased, cleaned surface. After the glue has dried, the piece is placed in an oven or oven to melt the pellets. The result is a three-dimensional color pattern on an object with any relief.
	Double-sided painting on glass	A very interesting technique, when due to the difference between the layers, you can create the illusion of three-dimensionality and other visual effects. This method more often used for glass in doorways or when using backlighting, otherwise the paint on the back will be almost hidden. A variant is possible when painting with opaque paints is used on the reverse side, and on the other side the artist uses transparent paints.
	Painting on glass of vertical surfaces	This is a rather difficult method as it requires thin layers of paint to avoid streaks. Therefore, painting vertical surfaces requires special skills and professionalism.
	Painting on glass with texture	If the glass structure itself is textured, this greatly complicates the process of applying the image. On the other hand, texture emphasizes the exclusivity of the glass panel.

What paints to use in a particular case is up to the designer and the artist. Some authors prefer oil-based paints because they retain their color after drying. Others, on the contrary, use light and airy watercolors, and in special cases even paints that show their colors only after heat treatment. To use such a technique requires great skill and creative flair. Of course, it should be borne in mind that watercolor from children's sets for artistic painting is unsuitable - for this purpose, persistent professional paints are needed. To preserve the brightness and saturation of colors, it is also desirable that the painted decor elements are not exposed to direct sunlight. Usually, special paints or a reflective film are used for this.

Rice. 2. Double-sided glass painting is especially successful when used on a door insert or window.

Where is glass painting used?

Glass painting allows you to create stylish original paintings using all the advantages of glass. This technique can also be used to design mirrors, windows, partitions and other interior elements. More about this on the page about .

special direction painting on glass - decorating furniture - tables, facades of kitchen sets, sliding wardrobe doors, etc. We invite you to go to the catalog to appreciate how elegant and stylish even large wardrobes, decorated with light and intricate patterns, look.

Interior meaning of glass painting

Decor painted will be interesting in office and commercial premises, as well as in the interior of public and government organizations, kindergartens, schools, medical institutions. When decorating housing, painting is most often used in bedrooms, living rooms, children's rooms, hallways and kitchens. For more information about this, see the page - .

Rice. 3. Painting on glass with a brush is very difficult, however, such a product will be one of a kind.

It should be borne in mind that the style variety of drawings is very large. Enough to see , to make sure that the painting can be used in any interior.

Painting on glass as an imitation of stained glass

Artistic painting allows you to create very realistic imitations of Tiffany stained glass windows. First, with the help of golden or silver paint, the contours of the elements of the pattern are applied to the glass, and then the individual segments are filled. Stained glass painting is much faster and cheaper than real Tiffany stained glass. However, an additional advantage is the absence of seams, since the base of the glass is solid.

glass painting cost

There is a wide variety of techniques and materials, so
Rice. 4. Real masterpieces of glass painting are obtained when combined with other techniques, such as sandblasting or etching.

Painting on glass by the artists of our studio

Our studio employs professional artists with extensive experience in stained glass decoration. Thanks to this, they can create real masterpieces of stained glass painting, worthy of becoming an adornment of a museum or a royal palace. We offer not only art painting on glass, but also the manufacture of the base: glass panels, partitions, ceilings, windows and cabinet furniture, as well as their installation. At the same time, we carry out all work, from design development to installation, on our own and on own equipment, so the price / quality ratio for art painting on glass in our studio always remains at an acceptable level.

Painting glass surfaces allows you to create unique products that can decorate the interior of a living space and office. A wide selection of materials and stencils in specialized stores makes it possible for both professional and novice artists to do this. Before starting work, it is worthwhile to figure out what paints on glass exist and how to apply them correctly.

Types of paint materials for glass

There are several main types of coating, depending on the purpose of application and the basis for production.

For stained glass

Stained glass paints are a decorative material that is resistant to abrasion, not afraid of water and sunlight. Stained glass paints allow you to decorate mirror surfaces, glass vases, dishes, photo frames, etc.

Before using a set of stained glass paints with stained glass windows, it is necessary to apply a contour that will prevent the staining composition from spreading. After drying, stained glass paints become transparent. The set of paints is most often included for applying contour lines.

A distinction is made between organic solvent materials and water-based paints, which differ in their field of application.

Acrylic

These water-based materials are opaque, similar to oil painting. For application, it is better to use a wide brush, and if the surface has a large area, then it is worth taking an acrylic composition in the form of an aerosol.

Oil based

Oil paints are opaque, therefore they are intended for painting matte surfaces. Before application, they must be diluted with an oil top coat, which makes the material resistant to water with the addition of detergents. However, the coating is not heat resistant.

Based on silicates

Silicate heat-resistant coatings for glass resemble watercolor, but they must be cured at a temperature of 700 to 800°C. This can be done at home in the oven, if the size of the product allows.

Application of a fixer

When purchasing a set of stained glass paints, you should know that fixing is necessary after they are applied and dried.

Varnish is a universal fixer for any paints. But, in addition to this function, it is used as a solvent if the material has thickened, or when mixing paints. Also, porous surfaces are varnished before painting, which makes it possible to make them smooth, simplifying the drawing process.

Application

Stained glass paints have their own application technology. To get started, you need to purchase:

a set of stained glass paints;
contours for drawing on a glass surface;
ready-made stencils, which, if desired, can be made independently;
ethanol;
brushes;
cotton buds;
toothpicks or a needle.

Before painting with stained glass paints, you should choose a pattern. You can take freely available templates and stencils for copying. Further, all work is carried out in stages and in a certain sequence.

Before painting glass, it is degreased with alcohol. If there is talent and skills of the artist, then a pattern is applied with a marker. Otherwise, you can attach it to reverse side products or transfer to the front side from the stencil through carbon paper.

The contour must be carefully circled around each detail, avoiding gaps. Then you should wait for it to dry completely, the time of which is indicated in the instructions.

Stained glass paints are applied by dropping, and then distributed with a brush from the center to the periphery in a uniform thick layer. Errors must be immediately corrected with cotton swabs, preventing the coating from drying out.

Having painted all the details of one color, you need to thoroughly rinse the brush, wipe it dry and start working with a different shade. Stained glass paints form air bubbles in their thickness, which can be removed with the tip of a needle or toothpick. To speed up the drying process of the finished pattern, you can use a hair dryer.

Application of acrylic coating

glass painting acrylic paints also begins with degreasing the work surface and applying a pattern on its own or using a stencil.

While do-it-yourself stained glass paints are applied only to a contoured drawing, this is not necessary for their acrylic counterparts.

If you make a contour, the image will resemble a stained glass window. And without its use, the pattern will be stylized as a work of painting.

After drying, the items of kitchen services should be coated with a heat-resistant varnish to increase their service life and preserve the colorfulness of the drawings.

It is worth considering the fact that decorative, heat-resistant water-based acrylic paints dry very quickly, but require baking in the oven for durability.

Use of balloon coatings

Aerosol paints are most commonly used on large pieces of glass, although professional artists also use them to decorate small pieces. This can be done without rich drawing experience by using stencils or construction tape.

In specialized stores, you can purchase the following types of aerosol formulations:

oil;
heat-resistant;
acrylic;
latex and others.

Most often, spray paints for stained-glass windows and other glass products have an acrylic base.

Also, production has been established for the processing of certain types of dishes.

The advantages of aerosol materials include:

quick readiness for use;
the ability to penetrate into hard-to-reach places;
good adhesive properties;
long shelf life without changing the quality characteristics;
no tools required for application;
resistance to abrasion and fading;
rich color palette;
high drying rate.

Despite the abundance of advantages, spray paints have some disadvantages:

impossibility;
complex application technique;
mandatory use of stencils for drawing small details - this increases the consumption of expensive paint;
aerosol materials of different colors cannot be mixed;
use of personal protective equipment such as goggles, mask or respirator during spraying.

When using aerosol acrylic paints, you should strictly follow the instructions to avoid the formation of streaks and other flaws.

When decorating glass surfaces in the open air, calm, cool weather should be chosen.

You can fix the applied pattern with a transparent acrylic varnish.

Making coatings at home

Despite the fact that the production of such materials for glass is at a high level, and a set of stained glass paints can be easily bought at the store, some artists prefer to make them themselves.

They are prepared on the basis of such an organic substance as gelatin, which must be diluted with BF-2 glue or transparent furniture varnish. To give the desired shade, dyes for fabric are added to the mixture. They can be replaced with ordinary gouache.

If this is your first time creating stained-glass windows with your own hands, then, having applied freshly prepared paint, it must be fixed with a colorless varnish to avoid washing off the pattern with water.

Plexiglas painting

Before you paint plexiglass, you need to familiarize yourself with the features of this process and purchase necessary materials and tools.

First, the surface is cleaned of grease, dust and dirt using alcohol. Then the product is placed in a heated dye solution of zaponlak for a time that ranges from 30 seconds to 15 minutes. This indicator determines the saturation of the tone.

After the end of the staining process, the glass is quickly transferred to a container with cold water until completely cooled. Next, you need to wipe the plexiglass with a dry cloth or felt to give it a shine. If the color of the product is not bright enough, then it can be made more saturated by repeating the entire cycle from the beginning, after carefully drying the treated surface.

When deciding how to paint plexiglass, it is worth deciding in advance on the color scheme and the availability of sketches that are applied after basic staining using stencils and a paint brush.

Having decided to decorate your home with hand-painted glassware, it is worth trying various techniques and coatings, and then making your choice. In specialized stores, you can first take the materials of the basic colors for dyeing, and then independently obtain various shades from them. And you can immediately purchase a set of stained glass paints and stencils, so that there is nothing to limit the flight of your imagination.

Glass painting allows you to transform faceless glass into an elegant work of art. To achieve such a result, it is necessary to know the technology of this type of creativity, as well as its features. Work on painting any object can be carried out using various materials: for example, paints can be stained glass or acrylic.

Glass painting has many uses: for example, painted bottles are an excellent decorative element, or a gift option. New Year's painting on glass will decorate a window, a mirror, and a gift bottle of champagne. For children, you can make beautiful lanterns from glass jars. Pictures painted on glass will look very original in the interior - for example, on a stained glass door. The picture can be anything - from flowers and butterflies, to a drawing in the style of "children's carols", if you allow your kids to paint the door to their room on their own. What is the best paint to paint with? Acrylic, stained glass, or gouache?

It is very convenient to paint on glass with gouache - firstly, these paints do not flow on a smooth surface, and secondly, you can easily correct or even wash off an unsuccessful drawing. Paint for drawing should be diluted with water to the consistency of liquid sour cream.

Each material requires specific instructions.

Glass painting allows you to transform faceless glass into an elegant work of art.

To finished work was expressive, in its implementation it is necessary to follow some general recommendations:

in order for the product to have a finished look, it is necessary to apply several layers of paint;
before applying a new coat of paint, make sure that the previous one is completely dry;
so that stains do not appear on the painted surface, strokes must be laid smoothly and quickly;
the pattern can be laid textured: for this you need to use a piece of foam rubber or a bristle brush;
to obtain interesting shades of paint of the same type can be mixed with each other;
You can make the painting brighter and more saturated by covering the product with a thin layer of varnish.

During work, you must follow the safety rules. There should be no open flame near the paints. When using odorous materials, it is necessary to use masks to protect the body and respiratory tract from their toxic effects.

Gallery: glass painting (25 photos)

Vase: painting on glass (video)

How to draw a contour on glass with your own hands?

Glass painting involves the use of special contours.

They should be applied according to a certain technology:

A small hole is made in the neck of the tube, and then a small amount of paint is squeezed out through it. This is required in order to remove air from the tube.
After a space forms in the tube, it is necessary to twist its tip so that pressure reappears inside it.
Then the entire edge of the hand and forearm is placed on some fixed support. Such a trick will eliminate the appearance of trembling in the hand.
The spout is placed in a slightly raised position above the glass, the body is slightly pressed with fingers.
The paint is laid along the drawn line to its end. The drawing of one line cannot be interrupted.
To complete the process of drawing the contour, you just need to stop pressing on the tube.
After the contour is completely applied, the work should be left for 5-6 hours for the paint to dry completely.

Glass painting involves the use of special contours

When an influx forms, it should immediately be removed with a toothpick. To do this, the influx must be distributed on different sides of the line. Using a toothpick, you can move the contour, which lay "out of line", but this should be done immediately after application.

Painting on glass with stained glass paints: the secrets of craftsmanship

Most often, stained glass paints are used for glass painting. This is due to the fact that the products painted with such material acquire an interesting, finished and expressive look.

However, this material requires special conditions usage:

large spaces should be filled with a pipette - this turns out a flat surface that looks like colored glass;
small areas of the picture must be painted with a brush;
the use of stained glass paints requires the presence of a contour on the product;
you need to fill each element with paint from the middle, gradually distributing the liquid to the very contour;
paint should not be entered on the contour itself, such flaws give the work a sloppy look;
the background should be drawn last, this will preserve the texture of the fill and avoid the appearance of various defects;
when bubbles form, they must be removed with a needle or simply transferred to the circuit;
the soiled circuit should be cleaned with a stick soaked in water or solvent.

Some craftswomen complain that stained glass paints begin to thicken after several uses. To fix this, they should be diluted with a special thinner produced by the same company as the paints used.

We paint the jar with our own hands: a step-by-step instruction

The use of stained glass paints when painting cans is complicated by the rounded surface of the base. If the paint is applied incorrectly, smudges and bumps may appear. To avoid this, follow the instructions below.

First of all, you need to prepare materials:

stained glass paints;
contour on glass or ceramics;
acrylic lacquer;
cone brushes;
palette;
sketch;
marker;
jar;
alcohol or acetone;
toothpicks;
solvent.

The use of stained glass paints when painting cans is complicated by the rounded surface of the base.

Master Class:

First of all, the surface of the jar should be degreased. For this, alcohol or acetone is used.
A stencil is cut out of the sketch, then it is superimposed on the surface and translated using a marker.
A contour is applied along the drawn lines. Drawing should be done in a circle of cans: from top to bottom.
After the contour base has completely dried, you can paint its fragments.
For this, the bank is placed on the edge, fixed. Objects should be poured in small areas so that the paint does not flow down the sides. For filling, a cone brush is used. Before turning the can on its other side, the paint should be dried well. If bubbles appear, they should be pierced with a toothpick.
The drawing made with stained glass paints needs to be covered with a layer of acrylic varnish.

Varnishing a jar will be more convenient with a spray varnish.

How to paint on glass with acrylic paints?

Painting on glass with acrylic paints is different from stained glass. It is worth considering that there are several ways to paint glass objects with this material. What? Firstly, traditional painting involves the use of a brush and acrylic paints:

the painting is done with the help of strokes;
the image may have a texture - when using brushes of different stiffness;
when applying different colors of paint next to each other, it is possible to achieve a mixture of shades or the formation of a clear contrasting line;
during work, the contour can be used as a decorative element in the last stages of work.

Painting on glass with acrylic paints differs from stained glass

Also, using acrylic paints, you can paint glass using the technique spot painting. In this case, acrylic contours are used, and drawing is carried out using the image of lines consisting of points of various diameters.

Bottle painting: a master class for beginners

Painted bottles can be used for different purposes. An empty container can be used as a vase for a flower, and a corked one can be used as a gift or decoration for a festive table. To paint a glass bottle with acrylic paints, you need:

bottle;
acrylic paints;
brushes;
alcohol;
cotton pads;
scotch;
acrylic lacquer.

Outlines can be used as an additional element.

We draw patterns with acrylic in stages:

Surface glass bottles degreased with a cotton pad dipped in alcohol.
A pattern is transferred to the surface of the bottle. Many craftswomen draw patterns on bottles "by eye".
The background is drawn first. If it has a large area, paint it over with a foam sponge.
Then large details of the pattern are drawn with a brush.
After all the large details have dried, you can paint the small nuances.
The finished drawing is dried.
If desired, you can decorate the drawings with the help of contours. In this case, acrylic should be applied only in some places, for example, in the core of a flower, leaf veins, glare in the eyes.
After the pattern has dried, the surface of the bottle is covered with 2-3 layers of acrylic varnish. Each layer is laid only after the previous one has dried.

Bottles painted in this way can fit into almost any interior. This is due to the fact that the variability of the depicted patterns can be unlimited and is selected exclusively by the craftswoman herself.

Painting on glass with acrylic (video)

Glass painting is a technique that can be mastered even by beginners. This is due to the fact that in order to create a masterpiece with your own hands, you do not need to have certain artistic abilities, but it is enough to use a ready-made template and know the features of applying one or another paint to a glass surface.

(No ratings yet)

Lena

There was a period in my life passion for such painting. She painted with stained glass paints and contours. A very exciting activity. It is necessary to ensure that the paints and contours are not expired.

The very thought of painting on glass with paints can be a little scary, but not everything is as scary as it might seem. If you have a template that you can trace around, then working with glass will be quite easy and fun, and this article will help you take your first steps in the art of painting on glass.

Steps

Part 1

Preparation for work

Gather the required materials. Painting on glass requires more than just paint and brushes. In addition, you will need to properly prepare the glass for painting so that the paint will adhere better. It should also be borne in mind that some paints need to be baked in the oven after work is completed to fix. Below is a list of what you need to draw:

glass object for drawing;
cotton balls;
medical alcohol;
pattern printed on paper;
masking tape;
paints on glass (stained glass);
brushes;
plate or palette;
oven (optional)

Pick up a glass object for coloring. You can color in jars, cups or wine glasses. You can also try to paint a glass panel. To make a panel, it will be easiest to remove the glass from the photo frame. When the work is completed, the glass can be inserted back into the frame and hung for all to see. Just remember to make sure that the glass of the photo frame is real, as some frames come with plexiglass.
- When displaying a panel in a photo frame, you can either remove or leave the back panel-substrate. If you decide to leave it, then it would be better to close it with a white sheet. Paints on glass are usually transparent, so they look best on a white background.
Clean glass with soapy water. Even if the glass surface appears clean, it still needs to be cleaned. The slightest trace of grease, dirt or dust can prevent the paint from bonding to the glass surface.

Prepare your design and pattern template. The template will need to be printed on paper. If you are going to paint a cup or jar, then the paper should be cut so that it goes inside the object.
- The best templates are outline drawings, like those found in coloring books.
Position the template where the pattern is to be applied. If you later plan to use a glass object for eating or drinking, then the drawing should be located where it will not touch the mouth. Even if a paint's description says it's "non-toxic," that doesn't mean it's safe to eat.

Wipe the glass surface with rubbing alcohol. Moisten a cotton ball with alcohol and completely wipe the surface of the glass object with it. Any greasy fingerprints may prevent good adhesion of the paint to the glass.
- Try not to touch the place on the glass where the drawing will be applied.
Leave the contour to dry for a day. The circuit must be completely dry before continuing. In most cases, this takes about 6-8 hours. However, it would be better to first read the instructions attached to the contour, as the drying time may vary, depending on the specific manufacturer.

Squeeze some paint over the glass onto a palette or plate. If the paint you use is packaged in a pointed tube, then it can be used to paint glass directly from the tube. Also, the paint can be pre-squeezed onto a palette or into a plate to work with it with a brush; this will give you more control over the drawing process.

Paint over the space of glass within the outlines of the drawing. Don't press too hard on the brush or you may erase existing outlines. Just stroke the areas of the glass that you want to paint with the brush. If the paint is too thin in some place, wait for it to dry before applying a second layer. If you rush to apply the second layer, then this can simply damage the first.

Be sure to rinse and dry the brush before moving on to work with a different paint color. When you need to change paint, dip the brush in water and swish it around to get the paint off. Gently squeeze the brush paper towel. If there are traces of paint on it, rinse the brush again. If the brush doesn't leave any marks, keep squeezing it until there is no excess water left on the bristles. If water gets into the paint, it can cause bubbles to form in it.

Touch up the drawing again if necessary. Carefully inspect your work for any blots that need to be corrected. It will be easier to correct the drawing while the paints are still wet than after that. To wipe off excess paint, use cotton swabs, brushes and toothpicks soaked in alcohol. This is usually required when you accidentally paint over the outlines of the drawing.
- If bubbles form in the paint, poke them with a pin or needle. This must be done before the paint dries.

Part 3

Drying paint and subsequent use of the painted object

Read the instructions that come with glass paints. Some paints require several days to dry before the painted item can be used, while others may take up to a month to dry. There are paints that require baking in an oven to fix. Since the instructions for working with different paints vary greatly, you should definitely read the instructions for the paints you use.

You will need

- Embossed stamps;
- synthetic brushes;
- contours on glass;
- acrylic paints;
- palette;
- acrylic lacquer;
- solvent;
- cotton pads.

Instruction

First you need to choose a pattern to apply to the glass. Of course, you can come up with a drawing in the course of painting, but not everyone is good at it. For such cases, there are special embossed stamps on sale, the pattern from which can be transferred to glass. You can do it differently. Select a drawing (available on the Internet), process it so that only the outline remains, print it out and attach it to the glass from the opposite side of the one on which you will draw. Then lightly dampen the paper so that it adheres to the glass. You can start painting. Do not forget to pre-wipe the surface to be painted with alcohol to remove oily fingerprints and other contaminants.

Drawing on glass can be applied using special contours or without them. Contours on glass, like paints, are produced in different colors, usually packaged in tubes and used to create glass painting using stained glass technique. Thicker than paint, the contours prevent mixing and spreading of acrylic, but they are quite difficult to apply, and this requires practice. The contour must be applied by slightly squeezing the tube and rather quickly moving its “nose” over the surface in the direction you need. The speed and pressure must be the same throughout the line, or you will get an uneven contour. Small irregularities can be corrected with a cotton swab dipped in water.

Then take a synthetic brush in the shape of a cone. The smaller the details of the picture that you want to paint, the thinner the brush should be. There are two main techniques for drawing a pattern on glass. The first technique is more suitable for transparent (stained glass) paints, but opaque acrylic paints can also be applied in this way. In order for acrylic paints to lay down smoothly, pick up more color on the brush and, lightly touching the glass, pull the paint a little to the sides, evenly distributing it over the surface in a not too thin layer. As soon as the paint stops flowing freely from the brush, pick it up again. Do this often and quickly to keep the edges of the painted space from drying out, otherwise you will get ugly streaks. The brush should not touch the same place twice, acrylic paints are applied in this technique only once.

If you are going to paint on glass with alkyd paints, then the application technique will be the same. For your information, acrylic paints based on alkyd resins, unlike paints on, spread better and do not require baking, but have a pungent odor and are washed off only with a solvent. The second application technique resembles the usual one on paper. To paint on glass in this technique, you will need opaque acrylic paints. Usually in this technique. In this case, broad strokes are made. In this technique, you can apply one layer of paint on top of another, but the first layer must have time to dry.

After you apply the design to the glass, let it dry. The time for complete drying is usually indicated in the instructions for the paints. Most water-based paints require baking. Products painted with water-based acrylic paints can be baked in the oven at the temperature indicated in the instructions. The final touch, which will secure the results of your work, is an acrylic varnish coating. It is desirable to cover with acrylic varnish both products painted with alkyd paints and products decorated with water-based paints.

A few little secrets. If you want to give texture to the drawing, use a hard brush. It will leave grooves that, when dried, will make the surface uneven. You can also use a foam sponge for this. Dip the sponge into the paint and apply the paint to the surface with a patting motion. If you do not have the right color, you can try to get it by mixing the available shades together. If you need to paint a large surface (make a background), use acrylic spray paint.