An interesting lesson in photography. Basics of photography for beginners. Errors in working with light

1/4 sec. and longer - you definitely need a tripod
1/8 - low light, need a tripod
1/15 — Cloudy. In most cases you need a tripod
1/30 - This is the longest shutter speed for handheld photography.
1/60 - you can shoot handheld, but without a telephoto lens
1/128 - walking person
1/250 - running
1/500 - cyclist
1/1000 and shorter - auto racing.

Why is the first number 3.5 and not 4? After all, standard aperture values ​​are based on increasing or decreasing the illumination of the object by half (and according to mathematics by √ 2, i.e. 1.4142 times:)

f1; f1.4; f2; f2.8; f4; f5.6; f8; f11; f16; f22; f32.

However, the first aperture numbers on the lenses may not coincide with the standard ones and may be, for example, f3.5; or f1.8 - this is due to the design of the lens. Changing the aperture by one division also changes the shutter speed by one division (usually twice the shutter speed value, but this can be adjusted by setting intermediate values ​​for greater accuracy). This ensures the same illumination.

Photography for beginners requires mastery of shutter speed and aperture. Only very sharp and hot-tempered people lack self-control, but the photographer is obliged - in any case! Setting the shutter speed and aperture is called exposure. Usually, for a certain lighting, it is necessary to match these two values, which are sometimes also called an exposure pair. The rules are:

The more you clamp the aperture, the longer the shutter speed should be (by the same amount), and vice versa. Photography Basics!

This rule works to get the same exposure (not change it for a photo in the same lighting). It turns out that the camera actually has 2 “identical” settings, and both do the same thing - dose the light. However, the effects of using these settings are different and photographers actively use this. Sometimes aperture is used not only to increase/decrease the amount of light, but also to control the depth of field. For example, like this:

As you can see, the figure in the foreground is in focus (in this case - for those unfamiliar with the noble game - it is the black king), and the blur of the background can be controlled by the aperture. What is focus? Any encyclopedia will say the following (or approximately the following):

Focus is the point at which a parallel beam of light rays passing through a single lens (or optical system) is collected after their refraction.

And what did the newcomer understand from this definition? What does it explain to him and how does it help the photographer in photography? Nothing and no way. Let's formulate it more clearly.

Focus is the point at which the lens creates a clear image of the subject.
Focusing is adjusting the lens to such a distance to the object at which we see its image most clearly and sharply.

The mentioned “setting” or aiming of the lens is done either automatically - by half-pressing the “start” button, or manually. With a DSLR, focusing is manually achieved by rotating the focusing ring on the lens until the subject being photographed becomes particularly clear in the viewfinder eyepiece. Then we have the term “object in focus”, “sharpened”, “focused”, etc. What's going on in the background? The background - and this is what you saw behind the king in the left photo - can be “blurry”, “out of focus”, “out of focus”, “out of focus area”, “not in the depth of field”, not clear, “cloudy”, “ blurry" - to your taste :) In a compact, as a rule, everything comes down to just selecting some focusing points in the on-screen menu (left, right, center, etc.), but in point-and-shoot cameras there are none at all, just autofocus.

But let's not get ahead of ourselves - we will return to focusing and to talking about depth of field. Let's look at another interesting effect that can be achieved by changing the aperture. When it is closed, luminous objects turn into... stars - the more we close it, the longer and sharper the rays are. Interestingly, the number of rays often depends on the number of aperture blades; the more blades, the more rays. If the number of petals is even, for example 8, then there will be exactly the same number of rays.

Now you probably understand that aperture and shutter speed are quite powerful creative tools in the hands of a photographer. And, of course, a tripod! Opening the aperture to f/2 (photo on the right) we get a very long shutter speed of 1/6 sec., and if the aperture is closed to f/13, and even at night, we get a much longer shutter speed (in this example 30 sec.!). Have you already guessed what will happen here without a tripod? That's right, everything will be smeared - they don't click with their hands in the dark!
...If you haven’t run off to shoot yet (or haven’t fallen asleep), then you’ll find out later “how,” “what,” and “why.”

Always differentiate between the phrases "increase your aperture" and "increase your aperture value." Their meaning is exactly the opposite. With an aperture value of 2, its opening is much larger than, for example, with a value of 8. In other words, you have opened (they also say “slightly opened”) the aperture. But “cover up” is just the opposite! At the same time, imagine the HOLE, and only then the numbers.

What is exposure and expopara

We already know exposition- this is the shutter speed and aperture necessary to obtain the required amount of light at a given light sensitivity of the matrix (adjustable by ISO settings.) Correct exposure is the key to the correct display of the image. And the shutter speed itself and the aperture in this combination are called exposure pair. Many beginners ask “how to find out which aperture corresponds to the desired shutter speed.” To answer them “depending on the lighting and your goals” means to answer nothing (although the answer is the most correct!). For those who want to learn more (and learn the basics of photography), look here:

or better yet, experiment more and you’ll understand everything yourself. Well, those who are completely lazy take the camera, aim it at the subject of shooting (in automatic mode), and look on the display to see what aperture corresponds to the required shutter speed :) Believe me, it teaches better than any textbook! At the same time, it is not even necessary to take photographs; it is not the photographs that can be included in the exhibition, but the camera itself!! :)

The most useful experiment

So, shutter speed is responsible for dosing light over time and combating movement, aperture for the amount of light and depth of field. Let's start with something simple, i.e. from the world. By shortening the shutter speed (or decreasing the aperture opening), we make the photo darker, and by increasing the values, we make it lighter. I don’t recommend reading this 17 times in a row, it’s better to pick up a camera and try it yourself - you’ll figure it out faster! Put on an experiment. Camera - in manual mode (M)! Without changing the aperture, take pictures with a decrease in shutter speed, for example, 1/2, 1/15, 1/60 s. etc. looking at the results each time. The picture should become darker. For example, like this:

If you do this experiment without a tripod, shooting handheld, you will notice a decrease in blur (shake) at short shutter speeds, and an increase at long shutter speeds. Then, without changing the shutter speed, experiment in the same way with the aperture. The usefulness of this advice will replace you reading hundreds of sites on similar topics (including mine), many of which flaunt terminology more than they try to explain anything. Therefore, the best photography tutorial is your own camera and your desire to learn how to take photographs correctly.

Here's another example of using endurance to achieve "creative results." I put it in quotes because “creative results” is a biased concept and everyone has their own.

Photo No. 1 was taken from a tripod, and a long shutter speed (1/4 sec) was used just to achieve... movement, or blur. As we can see, a fast-moving (relative to the camera) object is blurred, but as a result we feel the speed of the departing train. Whether it's beautiful or not, everyone decides for himself. In image No. 2, a short shutter speed (1/227 sec) made it possible to “freeze” (stop, freeze) a fast-moving bird in the frame. It's more technical than creative. A bird smeared across the clouds is unlikely to decorate the picture. Although, maybe someone will find it cool :)

How to avoid wiggling, we will continue to study. I have a rather strange photography textbook, because once again I propose to achieve the blur effect (and for the benefit of the picture), and only then - options for dealing with it. I do it to show how shutter speed and aperture work together. This sweet couple does a good job of demonstrating the basics of photography for beginners. Wouldn't picture #1, taken in the subway, be suitable for this purpose? Let's go in order.

On the left we see a photo with a rather beautiful effect of a waterfall cascading over the rocks. This jet blur effect is achieved with a slow shutter speed and a tripod. A shutter speed of 1/6 second was used here. Getting this value in low light (as in the photo in the subway) is not a problem, but what to do if the lighting is more than enough? The problem is that the automatic camera will try to set the shutter speed faster to avoid blur, but we need just the opposite! Here you should switch the camera to manual mode and hold down the aperture (there will be less light!) - and due to this, we calmly lengthen the shutter speed by the same number of steps (at the same time we will equalize the light). And it’s even easier to immediately set the desired shutter speed and aperture :)

This can be done either in manual mode or in shutter priority or aperture priority mode - as you see fit. For the waterfall, I had to stop the aperture down to f/16! to get a slow shutter speed of 1/6 sec. But if we deliberately use blur for artistic purposes, then what is a tripod for? It is needed so that only the water flows are blurred, while the remaining details of the landscape remain clear.

Now do you understand why automatic cameras (even the most expensive!) cannot always cope with the frame? Yes, she just doesn’t know what exactly you want to get in the picture! Smart technology tries to prevent blur and sets a short shutter speed, which is completely unsuitable for this style of shooting! And the conclusion? And the conclusion is simple:

The photographer takes pictures, not the camera.

This is also the basics of photography!
Great, but what if you have a soap dish and no manual settings? You can buy a DSLR, or you can wait for disgusting lighting, turn off the flash and shoot with long exposure moving objects from a tripod! Like in that photo in the subway: in the subway there is bad light and you don’t need to wait! If you don’t need photos in this style often, then you don’t have to buy an expensive camera :)
However, you should understand the difference - with a point-and-shoot camera you expect bad lighting, but with a camera with manual settings you make it yourself, clamping the aperture to the degree that will give you the desired shutter speed.

You can safely skip the next 2 headings about focal length and noise. Of course, if you have a good command of this material, otherwise some parts of my Textbook will not be entirely clear. In general, the focal length of a lens is a basic concept; It is also necessary to introduce what EGF is. So don’t be lazy to follow the links and come back. Don’t be afraid, the link is not the removal of a person sentenced to forced settlement in a certain area (for example, in Siberia), but just a transition to the corresponding page of this site. Coming back will be as easy as mindlessly clicking the camera shutter!

What is focal length

Since I have written a whole page about focal length and EGF, I won’t repeat myself, but those who don’t know can learn it here:
Focal length in 35 mm equivalent (EGF)
the rest read on. Those who don’t know how to read yet, or forgot after passing the Unified State Exam, learn the Russian alphabet. No tolerance, the site is only for those who know Russian! :)

So, by changing the focal length of the lens, you can bring your photographic object closer or further away. But not everyone knows how you can use this to achieve quite interesting effects without any Photoshop. For this you need a zoom lens, i.e. a lens with a variable focal length and the ability to change it manually (usually a zoom for DSLRs).

To obtain such photographs, we simply change the focal length by turning the corrugated ring on the lens, and this should be done while the camera shutter is open - i.e. right during the photo shoot. To have time to rotate, you need a long shutter speed, so shooting from a tripod is advisable. I used a long shutter speed (1 sec) when shooting with flash. No one will tell you how quickly to turn the ring and what kind of shutter speed is needed, since situations are different and the result can also be different - both successful and not so :-)

What are noises

How to avoid smearing

What is grease? Smudge, aka wiggle, is a fuzzy, out-of-focus photograph. Blurred, in short :) On the left, the entire picture is blurred (shot handheld, shutter speed 1/90 sec), on the right there is only a moving object - a girl, everything else is sharp (shot from a tripod, shutter speed 1/4 sec).

1. 2.

So, let's start with the eternal Russian questions “who is to blame” and “what to do”! You should not think that this issue is purely Russian, it concerns everyone, even blacks :) I advise those who like to make a fuss about tolerance to look for the coined word “tolerance” in explanatory dictionary Russian language Ozhegov and Shvedova. There is no such thing there, just as there is no word “political correctness” :) Just like the words Afro-French, Afro-Chinese, or African-American - but there is a Negro. It never occurred to the compilers of the dictionary that reasonable people in the 21st century would go so far as to call things by other names than their proper names :) Moreover, even famous word African does not reflect the essence, it may be a white man, born in Africa... And a Papuan and a Papuan in Denmark :)

So what is “tolerance”? Any parrot from a newspaper page will repeat that this is tolerance for another culture (religion, national tradition, etc.), but will not explain what exactly needs to be tolerated in a foreign culture and, most importantly, why. In addition, it is poorly understood how a culture can be different, different - it either exists, or, excuse me, it doesn’t :) In this regard, it is better to ask for an explanation of the term not even to philologists, but to doctors, I assure you, you will be in shocked: tolerance is a complete or partial absence of immune reactivity!! In other words, loss of immunity to foreign influence... It will not cure many, but it will make them think... Therefore, we will not treat a sick society and will return to blurry photographs. Let's select a trace from the same dictionary. meaning: blur - deprive of clarity, definiteness, sharpness. It’s more suitable for photographers than “smearing it on the face” :)

So, who's to blame? Lubrication occurs due to 4 main reasons:

The first point is clear. Above you have already seen a flying bird. But no one would want to be tolerant of a blurry bird in a photograph and treat it tolerantly :) Such “traditions” clearly lead to a flawed perception of the photograph even at a primitive level, and such a “photo culture”, of course, cannot be imposed (just as it is impossible to tolerate some customs of the aborigine cannibal from the glorious Mumbo-Yumbo tribe).
What to do?
The solution to the problem is to shorten the shutter speed, the shorter the better, if the aperture allows. If not, then you can raise the ISO higher if the noise is acceptable. Experienced photographers also use camera movement - they quickly move it after the bird so that it remains in the frame the entire time and does not move (of course, relative to the lens, otherwise the unfortunate bird will fall, perhaps on your head). This photography technique is called “shooting with wiring.” Below we see a seagull flying quite decently at a shutter speed of 1/1500 sec. And really, why shouldn’t it fly at such a short shutter speed :)

Note that the background (trees) turned out to be slightly blurred even at such a short shutter speed. The effect nicely emphasizes the movement of the bird, and it was achieved precisely due to shooting with wiring.

The second case (hand trembling) is not so simple. The shaking of the hands is transmitted to the camera, but why are the hands shaking? The question is, of course, rhetorical! From muscle tension, from an uncomfortable grip, from fatigue, from old age and even from bad mood. Okay, so be it - I haven’t forgotten, I remember what you wanted to hear... and from drinking too. Alas, my hands always shake :)
What to do?
Although everyone's hands tremble differently, the advice is the same: lead healthy image life, hold the camera correctly and press the button smoothly!

Point three: poor lighting. Why does poor lighting occur? Who doesn't know, I'll open it right now terrible secret. But because the Earth rotates around its axis, and day gives way to night :) And no matter how much the fanatics burned the people at the stake of the Inquisition, it still rotates! Believers, read the 10 commandments of Christ 7 times before taking advantage of the terrible law on your rights adopted by unbelieving politicians. Pope, repent of the heresy of the foolish who tortured thousands of people in the basements of the Middle Ages, and so that the crunching of bones and screams do not darken your sleeping mind at night, buy glasses and read school textbooks in the morning. She really spins (and the sun shines)!

So, we found out the reason for the poor lighting. Why does this cause lubrication? The camera is shaking. Of course, you need to understand that it is not the camera itself that is shaking, but again your hands. But it’s not entirely your fault anymore! In very poor light conditions (evening, night, cloudy) you need a long exposure time, for example, a second, two, sometimes more - and this makes even minimal hand shaking very noticeable. Neither a healthy lifestyle, nor an image stabilizer, nor the correct grip of the camera will help here. The worse the lighting of the subject, the more the damned movement spoils your masterpiece.
What to do?
Only a tripod can fundamentally cure this problem. And the invasion of hungry aborigines from distant Mumbo-Yumbo can only be cured by a healthy migration policy and strong state border!:) It’s not clear how to improve the health of the country’s leaders, demagogues who are broadcasting “we don’t have enough workers” - and this is in the presence of unemployment... In addition, the cheap hands of semi-literate Tajiks will come back to haunt them with a decrease in salaries and will turn out to be much more expensive than scientists leaving the country. As a result, we buy tripods and cameras designed anywhere but in Russia.

Point four. The blur is also different at different focal lengths: the longer the focus, the more blur. Who is guilty? Actually, this is also hand shaking. It is clear that you need to shorten the shutter speed if you don’t have a tripod, but sometimes you need to quickly determine what the minimum shutter speed should be set for a certain focal length.
What to do?
If we take the degree of hand trembling as an approximately constant value (not beyond the scope of a sober life and extreme old age), then an approximate formula for determining shutter speed is calculated - the value of its denominator should be greater than the focal length of the lens. For full-frame DSLRs and compacts, we first calculate the EGF, then “try on” shutter speeds for it.

For example, with a focal length of 30 mm in EFR, it is better not to shoot with a shutter speed longer than 1/30 sec., but to shoot with 1/60, or even shorter. For a 100mm lens, use a shutter speed faster than 1/100, such as 1/128. Of course, if the subject is moving, then you should shorten it even more.

Of course, the definition of hand shaking cannot be accurately measured, and some individuals may go beyond the rule in one direction or another, but in most cases the rule still works quite well. It should be remembered that a full-frame camera (35 mm format camera) has a focal length and EGF equal to each other, so it is even easier to determine the shutter speed to combat movement.

It’s worth adding that many nasties are easiest to treat with a tripod (the best image stabilizer!), but you don’t always have one at hand. What to do?

Firstly, drink less before shooting, secondly, hold the camera correctly, thirdly, turn on the image stabilizer if you have one (it won’t help in the case of a bird!). And then shorten the shutter speed; if it’s not enough, use a flash; if the flash is not enough, or its use is undesirable, then raise the ISO. Nothing helps? Buy a tripod!

But here’s the problem - when you’re in manual mode (we’ll look at other photography modes below) you set the shutter speed shorter, then less light will get in! And the picture in this case will become darker (underexposed, as photographers say). To prevent this from happening, you need to increase the aperture opening by the same order of magnitude. For example, there are shutter speeds of 1/15, 1/30, 1/60, 1/128 sec. etc. And there are apertures f/2.8, f/4, f/5.6, f/8, etc. For example, we shortened the shutter speed, moving it by 2 positions - from 1/15 to 1/60. In this case, the aperture opening also needs to be increased by 2 positions, for example, from f/8 to f/4. As a result, the photograph will receive exactly the same amount of light, but possible blur at a short shutter speed will be less noticeable to the eye than at a long shutter speed. And we will get a high-quality (or at least not blurry) picture. Well, if, of course, the lens aperture allows it (if your lens is marked f/2.8, then the aperture value f/2, or, say, f/1.4 will, of course, be unavailable, which means an even shorter shutter speed will be unavailable). It is in such cases that the ISO should be increased. It's better to have noise than a blurry photo!

Shooting modes

The essence of the main modes comes down to approximately the following. I recommend reading this only to those who have lost the instructions, or don’t have them, but have a camera :)

Mode selection wheel.
The photo viewing mode is selected, a little higher - green mode.

Clockwise: green mode, PSAM [discussed in the text above], SCENE (scene, or custom mode [discussed below]), video, SETUP (settings), quality ⁄ photo size, ISO (light sensitivity), WB (white balance) , viewing pictures.

Of course, the wheel may vary in different cameras (in inexpensive cameras it is simply absent), but everyone has a green mode and viewing pictures, even if there is no wheel :).

We often hear the following: if there is a green mode that “does everything itself,” then why are the others needed? Yes, the machine will select the correct (but average!) shutter speed and aperture values. And so the photograph of a cyclist, being well exposed, turns out to be blurry due to the long shutter speed. The machine doesn’t know what you want to shoot! Well, the autofocus doesn’t know whether the cyclist is riding or standing, hence the erroneous shutter speed, but the function of detecting smiles in the frame will teach you to smile and laugh when you fail! :)

In order to “tell” the camera what you need, there are other modes, which, unlike green, are usually called creative, or manual. Of these, the most useful ones are: "shutter priority" And "aperture priority", which are now available in many digital cameras. Now it’s easy to avoid the mistake: suppose you need to quickly change the shutter speed, then in the “shutter priority” mode you make it shorter (for example, to avoid blur) - and then the camera’s automatic setting the appropriate aperture number. In the same way, you can quickly change the aperture. But even this was not enough for the producers. Some cameras have a "sensitivity priority" mode - you set ISO - the camera selects shutter speed and aperture... and even "shutter speed and aperture priority" - in response, the machine selects sensitivity. Hmmm... All that remains is to complain about the absence of a red button: “make a masterpiece”...

In my opinion, only 2 modes are quite enough:
1) aperture priority (for quickly setting and controlling the depth of field, the shutter speed is also visible, which means it will be controlled by you), and
2) manual (for everything else).
Well, perhaps I would still leave a machine gun for beginners. Everything else is from the evil one :)

I will not talk in detail about the so-called user modes, such as "landscape", "portrait", " night landscape", "museum", "sport" and masses of similar ones that are in almost every cell. In any case, the essence of such modes comes down to a simple combination of shutter speeds and apertures, which is why these modes are generally absent in professional cameras - as they are completely unnecessary :) I think, even without being professionals, you yourself are able to set a short shutter speed instead of the “sport” mode, the maximum open the aperture instead of the “portrait” or “night landscape” mode (without a tripod), and, of course, turn off the flash when shooting in a museum...

Depth of field

There are other effects of using aperture, such as reducing or increasing the depth of field, and this is actively used by photographers to sharpen, for example, landscapes, or, conversely, blurring the background of portraits... Here is an example of a blurred or defocused background that was not captured into a shallow depth of field, or, as they also say, a small depth of field (an acute infectious disease of the respiratory tract caused by a virus? no, Depth of Sharply Imaged Space):

In image No. 1, the aperture is 2.9, which gives a depth of field of only a few centimeters, which is enough for the figure, but not for the background, which is located 20 centimeters further. As a result, the background did not fall within the small depth of field limit, and is therefore blurred. In image No. 2, the aperture is slightly closed (f4.4) because the depth of field is larger, but because... the distance to the green is even greater, it is still blurred. By the way, these pictures are a clear example that refutes the popular opinion, which is zealously promoted on many forums - it is impossible to blur the background with a compact. Beware of experts who write a lot, but do not give practical examples, i.e. with your pictures. Both photographs were taken with a compact (Nikon Coolpix 5400), an old one (2003) and not even the most expensive in its class. Moreover, picture No. 2 was not taken at the maximum open aperture, i.e. blurring is theoretically possible even more.

The following photo for the site was kindly provided to me by my friend Sergey Andreev. I don’t want to shock anyone - this photo was taken not even with a compact, but... with a mobile phone!

3.

As you can see, you can also get a small depth of field with a mobile phone. But controlling the depth of field and making it predictable seems very difficult: such a camera does not have an aperture setting. Despite this, the fact remains a fact - even with a camera mobile phone You can blur the background!

These classic examples of the use of depth of field, however, should not be taken to mean that a compact is in any way inferior to a DSLR. A fast prime lens mounted on a mirror will make the bokeh (background blur) much deeper (if necessary!) and with a more beautiful pattern. It should be remembered that long-focus optics “wash” the background best. But even with a kit lens, a SLR camera has more capabilities both in this regard and in terms of ease of depth of field control. Here are typical pictures with a defocused background:

A little trick for those who have a compact. Suitable for DSLR cameras, of course. If you want to shoot a portrait with a defocused background, then shoot so that the background is as far as possible from the face of the portrait :), and the face itself occupies as much of the frame as possible - then the background will be more blurred. In this case, the aperture should be as open as possible, and it is better to put the lens in the telephoto position (because the sharpness is greater at a wide angle). If the depth of field of your compact is too large for an apartment (the object does not fit into the frame!), then, of course, you will have to buy a more spacious apartment, but personally I prefer to shoot on the street, or use a DSLR :)
For example, like this:

What does shallow depth of field and bokeh give? The ability to highlight the main subject and make the picture more voluminous. In this case, the hand that types these lines on the keyboard is highlighted :)

What determines the depth of the sharply depicted space.

With the same matrix size (and other equal conditions), the depth of field depends on the following principles:

◆ if the aperture number is larger (f8 is larger than f2, i.e. the aperture opening is smaller), then the depth of field is larger;
◆ if the distance to the subject is greater, then the depth of field is greater;
◆ if the focal length of the lens is longer, then the depth of field is smaller;

in other words:

The depth of field depends on the aperture and the distance to the subject. The larger the aperture hole and the closer the lens to the object, the smaller the depth of field. And it doesn’t matter if you stepped closer with your feet, or zoomed in on the object.

If the distance to the object (and focal length) are unchanged, then the depth of field can only be changed using the aperture.

It should be understood that the depth of field is very dependent on the size of the matrix, but since it is assumed that the photographer is shooting with only one camera at a time (and not shooting like a cowboy from 2 different-caliber guns at once!), then we discuss the relationship between sensor sizes and depth of field let's omit it :) Let's say one thing: on big matrix easier to get a smaller depth of field.
What's the result? The smaller the depth of field, the more the background will be blurred. If the depth of field is large (like compacts), or the background is located close to the subject (i.e. falls within the depth of field), then blurring the background will not work - everything will be sharp, both the object and the background. And now everything is the same, but in a more accessible language:

If you want to heavily blur the background behind the portrait, then move closer (or zoom in) so that the face takes up most of the frame (it’s even better to use a long lens), while opening the aperture as much as possible. If you don’t want to, then close the aperture enough so that the background isn’t too cloudy :)

On the Internet you can find a lot of debate on the topic “does the depth of field depend on the focal length?” Some people think it depends, others, of course, don’t think so :) In general, democracy and freedom of speech are a very strange thing: even an ordinary piece of paper will definitely be called black by some if the majority believes that it is white. And why? But because freedom and you can do whatever you want! :) By the way, the degree of idiocy of society is assessed by the inability to determine the limit of the depth of field of what is permitted, and this embarrassment stems from a misunderstanding that unlimited freedoms are just as bad as if they were completely clamped (like a diaphragm)! By the way, the foundations of photography (not democracy) are based on the nature of light, lens design and the common sense of the photographer :)

Since I was often asked the question “why is it said differently about the depth of field on another site, but vice versa,” the author of these lines got tired of answering “you are free to choose any resource” - and wrote a short article on the opinion:

If you're not interested, feel free to skip it. Photography for beginners does not involve involving them in theoretical debates. Just like everyone else. The author only expressed his opinion about the “problem” - yielding to the wishes of the photography community. I hope the basics of photography don't suffer from this :)

I must warn beginners: do not make a small depth of field an end in itself. Firstly, blurring the background is not always appropriate. And secondly, a greater depth of field is required no less often, and in macro photography it is simply necessary. Most often, “full-field” sharpness is required when shooting landscapes, so we should dwell on this topic in more detail. Those. we don't stop, but read on :)

How to shoot a landscape correctly

For landscapes, as a rule, the aperture is closed so that everything is sharp, “from the navel to infinity,” as is often the case with compact cameras; in landscapes there you don’t have to cover the aperture at all :). A DSLR is more difficult to use (no matter what they say in advertising!) - fast lens may cause blur at the beginning of the panorama when focusing on distant objects. Blurring the near (or far) part of a landscape photo is not at all necessary. More precisely, it is not always necessary. This is why I advise you to cover the aperture even on a compact camera - to develop a habit called “correct photography.”

This is what typical landscapes look like :)

As, for example, in the following pictures.
Landscape No. 1: aperture closed to f8, EGF 24 mm. Landscape No. 2: aperture closed to f8, EGF 36 mm.

The focal length for landscapes is usually chosen less than the standard one, this ensures a wide angle - “more space will fit into the frame.” A typical example of such a plan is photograph No. 1, where the widest possible angle (for a given lens) was used. Of course, a landscape can also be shot at a longer focal length: it all depends on what you want to shoot, the angle, and the ability to get closer. For example, I didn’t have such an opportunity - to “frame with my feet” when photographing No. 2 - I would have simply drowned along with the camera, but I wanted to get a larger parachutist, because he is an important “detail” of the landscape... :)

The photography textbook does not pretend to provide a more detailed presentation of the basics of landscape photography, so a separate photo page was allocated for the latter. In general, I think landscape is the easiest place for a beginner to start with. This page covers not only the analysis typical errors, but also landscape photography with a standard lens. All this is in the main menu of the site, but it’s easier to click here:

Since the matrix is ​​the heart and the processor is the brain, the lens is the soul of the camera. And the photographer just presses a button :) If you seriously think so, then it’s better to hold off on buying a SLR camera, and at the same time remove this textbook from your bookmarks :) Landscape (like everything else!) You can just watch with your eyes “during the match” and not bother with cameras, lenses, photo sites and other photo nonsense :) And when you learn to look at the world around you from different angles, looking for the most advantageous one in your mind, you will easily understand whether you need a camera or not! Actually, this approach applies not only to the landscape and not only photography ...

For shooting portraits, lenses with a focal length of 50 mm (standard in EFR) and higher are best suited, i.e. telephoto lenses. To separate a person from the background and make the background blurry, you need to use a telephoto camera. If you want a person to show off against a beautiful background and this background can be seen, then you don’t need to take a telephoto camera at all :) In this case, you can shoot with a standard lens, or simply reduce the focal length (if you have a zoom), and you can also hold down, if possible, diaphragm. The basics of photography assume that it is the photographer who is taking pictures, and not his camera! I won't get tired of repeating it :)

The Pentax 16-45/f4 lens we reviewed earlier is more suitable for shooting landscapes (not because it’s a Pentax, but because it has a wider angle than a normal one!), but it can also shoot portraits. I deliberately give examples shot with this particular lens, since it resembles the standard lens that comes with the camera (usually called a “kit”) - this is what beginners use at first. You shouldn’t think that they are offering you - “first learn to play a guitar without strings, and only then buy yourself a real fender...” - I was just often asked the questions “is it possible to take good portraits with a whale”, “what can a whale do in macro” and the like, so I considered it necessary to use a lens closer to a whale lens. Why not, in fact, a whale? Yes, because I simply don’t have it :)

Since the aperture of the 16-45/4 lens is relatively low (f4), to shoot a portrait you need to open the aperture as much as possible. And, of course, set the lens to the maximum telephoto position - at a focal length of 45 mm, which is quite suitable for a portrait - there will be less geometric distortion. Noticeable distortion may be acceptable for a landscape, but for a portrait it will be a clear defect. When taking photographs, focusing should be done on the eyes (or the eye closest to you), since the eyes are the most expressive part of the portrait, it is not for nothing that they are called the mirror of the soul. If the depth of field is very small, then even if the ears are “blurred” along with the nose, the eyes are always in the sharpness zone. This is the technical part.

But the creative part is a little more complicated. Therefore, I have highlighted several well-known rules for constructing a composition, which even masters rarely allow themselves to break. A beginner should observe these rules rather than deny them; the opposite does not prove mastery. We will relate the construction of composition not only to a portrait, but also to any main subject of photography.

Someone else's hand in the frame next to the main character's face instantly transforms good photo sucks.
Nothing extra! Only significant objects should be left in the frame. This is the basics of photography, not just portrait photography.
It is better to film children from their height, or even lower!
People should not be cut at random, even if you are a surgeon. It’s bad to chop off the feet in a shot, and when shooting in profile, cut off the face (leaving the back of the head). It's horrible! Also, you should not cut a person’s figure in half with a horizon line (or a fence).
The face of the person being portrayed should be highlighted(depth of field, lighting, size and favorable location in the frame, play of light and shade, anything, but highlighted). This, in fact, applies to any shooting object.
The background should not be colorful and distract the viewer with incomprehensible objects. Throw out everything unnecessary from the background, blur it out, destroy it, make it yourself - just leave all your attention to the portrait.
The main subject should not always be placed exactly in the middle of the frame.

A beginner will find the “rule of thirds”, often used in photography, useful (dividing the frame into three equal parts); Semantic points that “attract the eye” are marked in green. Let's believe geometry is harmony! But... without excessive fanaticism.)

In addition, the portrait should, if possible, express the essence of a person and his most expressive features that reveal his character. If this doesn’t work out, then we can say that the portrait was not a success, or it could be another way - but it turned out to be a normal photo as a keepsake! Let's look at a typical portrait of an ordinary Russian macho :)

Russian macho.
aperture open to f4, focal length (EGF) 67 mm.

0.

To get such a blurry background, you need to not only open the aperture as much as possible, but also shoot from a very close distance, so that the face occupies most of the frame. And the background here, of course, was made not sharp, not in order to show that the background is not sharp (this is stupid!), but quite the opposite, in order to emphasize the main subject of the photo:)

And this object, it should be noted, is very stern in appearance... What a type! A sort of real Russian macho, a hero and favorite of women, the horror of enemies :) However, the term macho has nothing to do with that “sexually heroic” image created by stupid Latin American TV series, no less stupid American action films, and diligently exaggerated by our (no less lame ) domestic television. Women, don't flatter yourself! In fact, a macho is a rude and cruel male who takes women by force (read rape), and solves any issues with his fists and boots, in general, a kind of drunken village bumpkin from whom hard work (or idleness?), alas, did not make a man ... I apologize, this type is completely inapplicable to this Russian guy, and he doesn’t look like that at all, just with photography, as such, you can express a lot - if you want to :) That is. expressively emphasize and highlight some elusive facial features. Can you guess now what it means to take a portrait correctly?

Now a little about photographing children. They say children are the flowers of life. Some argue that the flowers of life are hippies :) All this is fundamentally wrong, because flowers must still be grown, and punks must be raised... And even if children do not grow up in our garden, we must be able to photograph them. Can you guess what phrase is coming next? Yes, yes, how to photograph children correctly :)

In both images the aperture is open to f4, EGF 67 mm.

1. 2.

It is very easy to photograph children - they are spontaneous, natural, their smiles are not forced. It is very difficult to photograph children - they constantly spin like tops, suddenly turn the back of their heads towards the lens and, in addition, constantly slip out of the frame... Imagine - they don’t even want to pose! And if this happens in a dimly lit room (and this almost always happens!), then after a few blurry pictures, you may already have a forced smile! Do whatever you want, take out a toy for the children, make a face, tell a joke, catch their mood, but just don’t force the child to seriously look straight into the lens for several minutes, promising that “a bird will fly out now.” To be honest, it won’t crash, I tried 17 times in a row - it’s useless :) It’s better to take a photo when the child is carried away with his own affairs, overwhelmed with emotions, and does not pay attention to either you or the photo taking...

Who said you can't shoot portraits with a wide-angle lens? At long focal lengths, they can be shot with any lens, not just a fast portrait lens. It doesn’t matter what you photograph with, but you should always know how to use lighting, even if you just have a built-in flash. It is believed that one should avoid shooting with a flash head-on, that for a portrait one should use a soft, diffuse light, use daylight, or external flash, aimed at the ceiling, or light reflectors... All this is true, and it’s even better to have your own photo studio with photo models. Remember, this site is for beginners. Even in bright sunshine, use the flash to highlight deep shadows on your face, especially backlight. And, most importantly, look for interesting shooting angles. But if the lighting allows, then the flash should be turned off, because it really kills natural light and gives a flat image.

The flash built into the camera is, of course, weak, but you need to know how to use it.

When you see a lot of flashing flashes in the stands of a huge stadium, you should not assume that a massive spiritual development of the population has occurred in the country, and instead of sellers and peddlers of advertising garbage, many photographers have appeared :)

You should be aware that the flash built into the camera usually does not shoot further than 3-5 meters. That’s why it’s truly surprising: what are people going to highlight from the distance of the stands? In order not to be disappointed in humanity, and to gain peace of mind, always be inclined to think that “photographers” simply forget to turn off automatic flash firing. Do not succumb to sclerosis - this leads to premature battery discharge :)

How to use flash? It can be done automatically, but in advanced cameras it is possible to adjust the pulse power (- +). To avoid overexposing your face, reduce the power at close distances and, conversely, increase it if the object is located several meters away. This feature is especially useful when shooting against oncoming light. Alas, the flash in point-and-shoot cameras is not adjustable; it can only be used in automatic mode or turned off.

Shot No. 3 was taken in a dimly lit room and here it is simply necessary to turn on the flash - children are constantly on the move, hence the likelihood of blur is too high. Of course, I opened the aperture to f4 to get a minimum depth of field, entrusted everything else to automation, and shot at ISO 100. Actually, I always shoot at the minimum ISO, and only sometimes at a higher one :)

In both photographs, EGF = 67 mm. But different ISO, aperture and
different flash modes...

Particularly noteworthy in terms of flash use is shot #4. I had to take pictures late in the evening, without a tripod, and even on the aperture, clamped right up to 8 - and all because of my quirk to capture not only the girl, but also the background of the night landscape in the frame, and I wanted to get this background not completely blurry, which would be inevitable with the aperture open and the background removed so much. It is pointless to use a flash for this purpose straightforwardly - the face, of course, will be illuminated, but the landscape will not be visible - the flash will not reach it.

Therefore, the shooting was carried out in slow sync along the rear curtain. This is such a flash mode: the camera exposes the background for a long time at a slow shutter speed, and only at the very end quickly illuminates the background with a flash (in this case, the face). But in the end the shutter speed turned out to be 8 seconds! I had to raise the ISO to 400 and get a much shorter shutter speed - “only” 2 seconds. Smear was still inevitable. What to do? The easiest thing was not to be weird, open the aperture completely, set the flash to automatic, and take a normal photo at ISO - 100 and a shutter speed of 1/60 s. Just think, the background is not visible, we are not a background, but a night portrait. By the way, please note that the focus there was not on the eye, but on the mustache :), - in the center of the frame - a typical mistake of beginners who took a DSLR in their hands for the first time. We'll come back to proper focusing later...

But I was stubborn... and definitely wanted a night portrait with only night lights, but 2 sec. shutter speeds were an obstacle, and I didn’t want to increase the ISO even more. I advised the model to rest her elbow on a stone, thereby firmly fixing her chin, and not move, and the camera was no less rigidly fixed in her hands, resting her elbows on another stone - it turned out to be something like a tripod... In general, the girl managed to do everything right: hold for 2 seconds without blinking, smile, and look quite natural at the same time. The exposure time itself was spent exposing the background (and, partly, the foreground), and the flash at the end of the exposure clearly captured our model just before the shutter closed.
I can’t judge whether the portrait turned out well, but the girl was definitely good... In any case, I managed to do exactly what was intended, and not what could have turned out :) And you shouldn’t look for ambiguities in my words - even if it says “how to pick up girls correctly!” :)

- Ha! Any fool can take pictures like that! Give me an expensive professional camera with a set of top lenses, I’ll tell you something else! - another newcomer will exclaim and... he will be right. But he will be right not because he clicks, but because, perhaps, he didn’t see bad photos made by no means a soap dish with a plastic lens. And here's an example, enjoy:

So, photo number 5. What can we say? You can rant for a long time about choosing a lens for a camera. To say that this picture is well exposed, focused, there is no movement, the white balance is not too low, and there is no noise either. Everything is good yes? The feet are cut off, a drainpipe is sticking out of the head, and the background... there are not enough words in the Russian language to express the absurdity of the background and the wretchedness of the plot. Yes, this is generally beyond good and evil :) Not even the most expensive camera can save you from such mistakes - you can’t see the world like that - a girl in a stone trough with a drainpipe in her head - you can’t shoot like that! I feel unbearably painful and excruciatingly ashamed for this photo (and, of course, for all the years I have lived):) Although... after an evening watching our television, such a photograph may seem like a masterpiece....
But No. 6 is a completely normal full-length portrait. Not Cartier-Bresson, of course, but at least a decent amateur photo as a souvenir. There’s no shame in giving something like this, but the date is missing. Well, this is, of course, my opinion :)

The photo on the left looks more pleasant than just a photo for memory. If you have not yet become stale in your soul in our completely crazy world, and if you have not yet lost your mind in a society that is called either secular, or Orthodox, or criminal, or a consumer society - and even democratic - then there is a chance that this unpretentious photo of a grandmother with granddaughter will not leave you indifferent. Their faces are shining, the photo exudes warmth and peace. To do this, it is not necessary to use a camera with the function of face and smile recognition :) If the photographer is not able to recognize faces, then he needs to stop drinking, and if this does not help, stop taking a photo! In general, this is not difficult to remove. Especially when the portrayed absolutely do not pay attention to the photographer and do not suspect that they are being filmed. If you sat them in front of a camera and forced them to look into the lens, then all spontaneity would disappear in the blink of an eye, it’s good if there are still forced smiles. And you know, for this photo I don’t really want to indicate what shutter speed and aperture was set, and whether the noise was very noticeable. And even more so, there is no desire to discuss the type of matrix of the manufacturer, or the promotion of the brand :)

And the photo on the right was taken with a compact camera. This is not even a portrait or a staged photo, but a purely reportage photograph taken with a small compact with a rotating screen. You look down at the screen turned horizontally, and shoot forward and slightly upward from under the table! It’s just the telltale flash that gives it away, but I really couldn’t turn off the puff in a poorly lit room! The most important thing is that the photo has already been taken! Do you think he's a Russian macho again? no, but the type turned out to be quite colorful too :)

We have already looked at how to shoot portraits with a wide-angle zoom. And it would be dishonest not to give an example made with a classic lens from the Pentax line: this is a fast 50/1.4. Of course, other manufacturers will also have similar models (both expensive f1.4 and more affordable f1.7); and in general, fixed lenses continue to exist successfully due to the best price/quality ratio and the best price/aperture ratio. This is expressed as follows:

With the same aperture, the optical distortion of a fixed lens is less, and with the same quality and aperture, the zoom will be an order of magnitude more expensive. And even in a dream, the zoom will not be able to compete with primes in terms of aperture greater than f2/8.

The only exceptions are the lenses of some top-end compacts, and the exception, as you know, only confirms the rule - such cameras are very expensive. And even in them there are almost no fixed lenses: compact cameras are positioned for beginners, and the manufacturer does not want to explain to a beginner why a prime lens is needed when there is a fast zoom. I'll try: a zoom lens has more distortion, but it's easier and cheaper to make for a small sensor than for a large one :)

The advent of high-aperture zooms (and 2.8 is a very expensive zoom, often more expensive than the camera itself!) has not put an end to fifty dollars and other lenses with a fixed focal length in DSLRs. By the way, such a “fifty dollar” on a camera with a crop factor of 1.5 confidently turns into a mini-telephoto with an EGF = 75 mm. In general, this is a pretty good portraiture. At the open apertures that this lens can allow, soft focus photos look very good.

But here's the paradox. If you are advised to shoot portraits with an open aperture, then for high-aperture portraiture you can advise quite the opposite: tighten the aperture a couple of stops!

Firstly, when it is closed, some optical distortions characteristic of open holes are minimized. Secondly, with the f1.4 hole wide open, the depth of field becomes so shallow that most of the face's muzzle will be completely out of focus, especially if you take a close-up portrait.

For example, the face on the left was photographed at aperture 1.4 with focusing on the right eye (hmm, the cat thinks that it is her left one!). And now the second eye was no longer in focus. In principle, this is normal (even with a close-up), but if the shutter speed allows, you can slightly close the aperture here. By the way, for my part, the opinion of some animal about the location of the eyes is deeply alien to me... and then a cat will have its own vision of the world :)

Every amateur photographer has a good hundred photographs of pets (and, perhaps, more than one), so I don’t expect to surprise anyone: just think, a cat. But look at the lack of attention to the crown of nature - man :) Yes, yes. The one who photographs her. The fashion model didn't even turn her head!

This beast doesn’t give a damn about anyone’s understanding of the world - she has her own and, moreover, is completely self-sufficient... no, it doesn’t bother me! Just think, a fashion model with a ponytail...

Returning to the lens, I will say that high-aperture optics are convenient for shooting without flash, even in a dimly lit room. Here the illumination allowed us to clamp the aperture to f2.

- How so!? - asks the amateur photographer, - you choose a lens because of its aperture, and then reduce this same aperture by closing the aperture! Nonsense…

And this is not a question, it is very simply explained. In fact, you buy a lens not at all because of the powerful aperture, as many people think, but in order to make your photos look the way they were intended! And the greater the lens aperture, the greater the opportunities for this...

In the photo on the left, the aperture was slightly clamped to f1.7 at ISO 400. This old "film" lens at wide apertures (even clamped to f1.7 is also quite open) makes the picture soft, which can be advantageous for portraits. Here it should be noted that the desire to make any photo sharp "as soon as possible", "to pimples on the skin", and even "to pain in the eyes" is common to many amateurs. A photograph with a “soft portrait” seems to them both soapy and cloudy, and worthy of all other photographic (and not so) words. By the way, it's wrong. What is good for a landscape (and even then not always!) is simply death for a portrait. Compare this photo with those sharp faces taken with the above Pentax 16-45/f4. If you prefer such sharp portraits, then maybe the DSLR was bought too early, and you should shoot with a soap dish for a while?

A prime lens is good for everyone, but it should not be assumed that it does not have flaws. Everyone has flaws :)

The main disadvantage of a fixed focal length lens is the complete lack of zoom! Yes, yes, you understood everything correctly - you will have to run back and forth with your legs, legs, to take what you want to get in the picture into the frame of the frame :)

Horrible! And this is instead of standing still comfortably turning the corrugated zoom ring on the DSLR lens, or pressing the zoom button on the compact :) In fact, the main drawback of the fix is ​​not this, and not even the inability to get close to the subject, or, conversely, move away. This problem is "easily" solved by a set of heavy lenses with different focal lengths and a light bag for them :) Or even a fashionable photo backpack :) But what to do when you need to immediately frame a fleeting moment? Here zoom is beyond any competition.

Most likely, I will continue the topic of “how to shoot landscapes and portraits”, perhaps I will highlight portraits on a separate page, such as “landscape” and “macro photography”. I understand perfectly well that the topics have not been fully (or even a third!) covered, but at least you have seen what and how you can shoot with inexpensive lenses without using special studio lighting. In all examples, only the flash built into the camera was used (or not used!).

What is exposure metering

Not every digital camera has manual shutter speed and aperture settings, but believe me, everyone has automatic ones :) To determine the illumination of an object in the frame, the camera has an exposure metering system that first estimates the degree of this illumination, and then sets the desired shutter speed itself and diaphragm. Correct exposure metering is necessary to obtain an image that reflects the subject as we actually see it. This is automatically done by the camera’s built-in metering system - an exposure meter, which usually does a good job of this task.

One photographer told me that it has become uninteresting to shoot now; in most cases, the camera itself copes perfectly with all the settings, even on full automatic, and a person only has to stupidly pull the trigger. They say that the spirit of creativity that was on the film is leaving, etc. and so on. But what prevents a photographer from switching to manual mode and shooting the way he wants? Since my site is designed for beginners, and not for gurus, I would like to immediately give advice - try shooting with manual settings! And if it doesn’t work out, then when shooting automatically, don’t be lazy to compare your mental shutter speeds and apertures with those shown by the camera’s exposure meter. This is useful! This develops the spirit of creative experimentation and teaches great things. By the way, the automatic machine is far from useless, because sometimes you need to take a photo very quickly - it happens that there is no time to tinker with the settings - the bird may fly away!

I advised a photographer friend of mine who was yearning for film to throw away his digital camera and buy a mechanical film camera in order to forever forget the “creative crisis of digital.” For some reason he looked at me very incredulously... which is understandable: the crisis is not in digital or film, but only in his own brains! And this applies not only to photography, but because philosophy, or politics (as, for example, Mr. Medveputkin, in which there is no place for domestic photographic equipment, as well as other Russian goods) is not the topic of this article, let’s return to exposure metering and briefly talk about its types.

Exposure metering is necessary to correctly determine the exposure pair - shutter speed and aperture, as well as to control them using the viewfinder or screen.

It is necessary to control the shutter speed to avoid blur, and the aperture to understand the depth of field assessment. This is the basics of photography!

In advanced cameras, there are 3 main types of automatic exposure metering settings: matrix, center-weighted and spot. Let's start with the smallest one :)

1. Spot metering. Allows you to measure exposure only over a small area in the frame, roughly speaking at a large point, or in a small circle :) This is about 3% of the matrix area. This is usually the center of the frame, but some cameras allow you to set this point in other places. Spot metering is used for large differences in the dynamic range of brightness; usually then you need to choose the lesser evil: unimportant details will be overexposed/underexposed, but the correct measurement will be made on a plot-important part of the object being photographed.
2. Central - weighted metering. As the name suggests, metering is done in the center - along the “spot” in the central part of the frame (about 12%), and the “periphery” is given much less attention, but it does :) It differs from spot measurement (except for the above) only in the size of the measured area - it much more. Center-weighted metering is used more often, for example, it is more convenient for taking portraits.
3. Matrix metering. In this case, measurement is performed over the entire area of ​​the matrix, divided into many zones; Next, the measurement results are compared with a database of combinations of shutter speeds and apertures, and then the best result is selected. Matrix metering is suitable for most scenes; it is the one in the default settings - even in point-and-shoot cameras, where there is no option to select settings at all.

In simple situations - where there is no large difference in brightness - all three types can give approximately the same result, but in complex situations the estimates can differ greatly. Therefore, in addition to matrix metering, there is spot and central. In addition, exposure metering can be done using specialized external gadgets... ugh, devices such as an exposure meter or a flash meter :)

What you need to know about focus

If you shoot with a point-and-shoot camera, then you don’t need to know anything about focus! Those who disagree, read on :) Indeed, the machine itself will perfectly focus the soap dish at infinity - everything will be sharp: as they say, from the navel to the very horizon. This is both good and bad at the same time. Good - because everything will be in focus, bad because you will not be able to highlight the main subject of the photo, while blurring insignificant background details. As we know, the latter is especially easy for a SLR camera. But you shouldn’t blindly believe those who claim that it’s easy even for housewives to take pictures with an automatic DSLR. Here are a couple of pictures with a DSLR camera that I gave to an inexperienced person to take pictures. Realizing that this was his first time holding the camera, I set it to automatic. After clicking a couple of times, the man looked at the pictures and said: “Why do we need such a big camera, a small soap dish takes pictures even more clearly.”
Let's zoom in and see what he didn't like:

1. 2.

We will not find fault with the poor composition of the frame of these photographs and, especially, with their artistic value. Let's assume that this is regular photo for memory, and we are talking here not about creative achievements, but about something completely different - about technical quality. The point is short: incorrect depth of field. In photo No. 1, the grass in the background is absolutely out of touch and only interferes with the perception of the photo. When photographing people in fairly close-up, it is still assumed that people are the main subject of the photograph, which means they must be well focused. But this is precisely not the case, focusing on the background! That is why even an undemanding beginner noticed that “the soap camera takes pictures more clearly.” Is a DSLR really worse? Let's figure it out.

By default, autofocus works in the center of the frame, so in image No. 1 there is a focus miss. But in fact, this is not the fault of the camera, but the mistake of the photographer’s sniper, who aimed the camera in the center - past both people. So even drunk policemen, now dressed in police uniforms, do not shoot :) By the way, for veterans of the Great Patriotic War, the word policeman and policeman are equivalent to the word traitor...

What do we have in the photo? The background - the water and the opposite shore are depicted sharply, and the players in the middle ground are out of focus, and the grass in the background is even more out of focus. In photo No. 2, the camera focused, on the contrary, on the grass, and everything else was out of focus. The pictures have one similarity - the main characters never came into focus! These real (not staged) photographs show in the best possible way that the camera machine gun does not understand where it should aim! Especially if the photographer doesn’t think about focusing, but just presses buttons :) In this case, the SLR camera is really inferior to the point-and-shoot camera, which gives a sharp frame from the background to the horizon (and even further!).
Returning to the topic of choosing a camera, I will note the following:

If you don’t want to study photography, tinker with settings, think, read instructions and tedious websites, buy the cheapest compact with one button and no manual control.

By the way, people who do not want to study anything are welcomed and demanded by the state in incredibly large numbers. I bought a DSLR, but it didn’t fit - nonsense, I’ll buy a compact one. A black soap dish does not match your image - buy a pink one and then a green one. Tired of furniture and old camera - throw it all away and buy it again! This is right. By saving your money, you are a bad citizen, because you do not contribute to building a society with a developed grin of capitalism.

I bought a car - I didn’t like the traffic jams, expensive gasoline and the lack of parking - I bought a motorcycle, it was stolen - I bought another, and when it turned out that it was difficult to carry it to the 2nd floor, I bought a bicycle :) It’s okay, we are building a consumer society and consumers, is not it? :) Do you know how nice it is to consume without thinking about the reasons for what is happening! :) No, well, at least a little... well, admit it to yourself... Well, okay, read on. :)

But still, what to do if the main objects are located at the edges? If you have a more or less serious device, and there are manual settings, then you can set the focus location - the automatic machine does not know what exactly you want to shoot and what exactly should be in focus: the object on the right, in the middle, or on the left... Typical The mistake in this case is that the camera is aimed at the center. For example, as in picture No. 1.

1. 2.

We've seen this before. In image No. 1, the camera focused in the center (i.e. in the background), and the cup and coffee jar are located to the left and right of the center, which is why they were out of focus, i.e. out of focus. But in picture No. 2 the focus was on the cup and we got what we wanted. The subjects are highlighted, and the background, which is insignificant in this case, is blurred...

How to do it? If it is not possible to set the focus location, then you can use the “lock-focus” function, which is available in many cameras. In the first case, we aimed the camera at the center and pressed the shutter button, immediately taking a photo, which was a mistake. In the second case, we pointed the camera at the cup and pressed the shutter button, but not all the way, but only halfway. At the same time, the camera focused (as you might guess, on the cup). Then, without releasing the button (it’s important not to press it all the way!), we aimed the camera in the center so that not only a cup, but also a coffee can would fit into the frame, and only now we pressed the button all the way. All this time the camera remembered the focus distance to the cup. The picture is ready. Pictures with the “correct” focus will look more voluminous and artistically expressive.

By the way, the main subject of the photograph—in this case, the cup—has long since broken, but its image continues to serve beginners well in understanding the basics of photography. I now consume kilograms of coffee, alas, with another cup, which has not yet earned the role of a fashion model :)

But how to properly shoot close-up and long-range shots at the same time in focus with a SLR camera? That's right, clamp down the diaphragm!

The closer the foreground is to us, the less discouraged we are, but if we want everything sharply, then we clamp down more :)

Advanced cameras have other settings, for example, highlighting the focus area with a special frame, or focusing on an object by rotating the ring on the lens (manual focus). However, not everyone has such settings, but mostly in reflex cameras, and in some particularly advanced digital compacts.

There is such a purely technical point in photography as autofocus accuracy. Or, if you like, an autofocus miss :) He misses, my dear, even in expensive cameras, because he does not know human goals and desires - namely, what to focus on. Especially in scenes like the one on the left (it’s better to enlarge the picture). Thin twigs are sometimes a serious obstacle for a blunt machine gun, even if the photographer tries to accurately place them in the crosshairs. But focusing occurs either in the background or on twigs, the camera buzzes, the lens moves back and forth, trying to focus on a target unknown to it. In more civilized versions, nothing will buzz; the focus will simply miss the background, but who cares? But it’s easier to immediately turn off automatic focusing, since you can focus much faster and more accurately manually by rotating the ring on the lens in the “old-fashioned way” and controlling the depth of field using the eye in the viewfinder.

By the way, in compact cameras there is almost no such problem, because the depth of field in the compact is too large. And at a distance of 1 - 2 meters, everything around him will be sharp, and a miss (if there was one) will not be noticeable to the eye. It is clear that this is not so much an advantage as a disadvantage: in this plot, twigs play a leading role, it is important to highlight them - otherwise they will completely merge with the colorful background. And in general, the basics of photography say that highlighting the main subject of photography is not only quite natural and not ugly, but quite necessary.

Let us dwell in more detail on such a problem as autofocus speed. Autofocus in some types of reportage photography will clearly show what the compact can do and what it can’t. The pages of this site have already mentioned autofocus speed, but without examples, and this is not good, so here are a couple. So, what the compact can “not really” do:

Shutter speed 1/1500

1. 2.

And what is so impossible? At fast shutter speeds this is not a problem at all. However, the point is the transience of the moment (image No. 1). The very next moment, the boat that has taken off will flop into the water and in the frame it may already be overturned (shot No. 2), or it may “fly out” of the frame altogether. Because the digital compact simply won’t have time to focus in that amount of time. That is, with a short shutter speed the frame will come out, maybe even of high quality, but... it will be a completely different frame! It’s not difficult to capture this with a DSLR, especially if you have some skills. This is done when shooting “with tracking” (the camera is moved synchronously with the movement, constantly keeping the object in the viewfinder), and the button is pressed at the right moment (in our case, during the take-off of the scooter). And here the DSLR will show the shooting speed, but the compact will not. The compact has slow autofocus, shutter lag, and other unpleasantly slow things.

The slowness of compacts makes them unsuitable for such reporting. In addition, it is very difficult to shoot with a point-and-shoot camera with wiring through the screen, and not through the viewfinder, which it simply does not have... What can you do, this is a design feature. You can, of course, set it to continuous shooting if the camera allows it (and if not?), and here you may be lucky (or unlucky...). You can manually set all the settings in advance (if they exist, of course) and focus in advance at the intended shooting point (if you know exactly where this point will be). By doing this, we achieve the fact that the compact thinks less, but alas, the preparations themselves take time - you can miss a frame! And therefore all these tricks do not provide any guarantee of the desired result. However, I mentioned earlier that a soap dish snatched from a shirt pocket can sometimes outpace a large DSLR in reportage shooting. There is no contradiction here, it’s just that this phrase applies to newcomers, and not to reporters who always have a camera at the ready - especially if they feel that the moment has come...

What kind of reportage shot can be made with a compact then? Or at least this one:

White balance

White balance (WB) is sometimes called the color temperature of ambient light. For example, they say: “the picture is yellow,” “the color is too blue,” “the color is too cold,” etc., which you can read about in my photo dictionary. But it's easier and easier to show photos to understand the difference. In the second photo, the white balance is improved - in my opinion, of course. In this case, the look was based on the natural rendering of color, i.e. the one that was at the time of photography.

Cool and warm white balance.

White balance can be set both in the camera before shooting and edited afterwards in a graphics editor. It is possible, but not necessary! A simple everyday truth says that you learn from mistakes. A wiser philosophy affirms a more sensible idea: you should learn from the mistakes of others, so as not to correct your own later. Absolutely true in every sense, not just in photography!

But I’m telling you: mistakes need to be anticipated in order to avoid them altogether :)

Indeed, it is better to set the white balance before shooting than to edit it later in editors, usually with some loss of quality. Shooting in a RAW file (raw format), of course, makes it easier to edit the BB, but this is not always a panacea.

Alas, any method has its advantages and disadvantages, RAW is no exception. And if pre-setting the BB reduces the efficiency of the photo shoot, then the “raw format” reduces the efficiency of pre-press preparation and the capacity of the memory card to boot :)

Therefore, you yourself must anticipate your own preferences about color in photography!

In addition, RAW is very limited (and even completely useless) in the case of obtaining detail from completely knocked out highlights, and stretching shadows more easily leads to increased noise. This, of course, does not mean that the raw format should not be used. But it will only help greatly with the highest possible quality shooting, which is what I advise you to strive for. It's better to immediately set the correct exposure and white balance - even when shooting in RAW.

Typical WB settings in a camera

There are also BB settings on a temperature scale. Here it’s a good idea to re-study the instructions for the camera while experimenting with its settings. By default, the camera shoots “automatically,” but automation, as we know, does not always cope with the photographer’s intentions.

Experiment! Do you know the difference between belief in God and truth? Truth can be verified by scientific experiment, but the existence of God can never be verified. Experiment and you will be rewarded :)

Photo analysis

But once I deviated from this rule, here is an example dialogue:

- You don’t want to criticize, but at least say something...

— When sending the photographs, you yourself should have said at least something about them. What do you expect from the assessment? Are you happy with the landscape, or is there something confusing about this photograph? What did you film, what did you want to express and convey to the viewer? Finally, what were the shooting conditions, what was the shutter speed, aperture, ISO, focal length.

Well, okay, I decided to tell him myself why to torture the girl. The photo is just a photo, you won’t see anything special there. There is nothing to comment here. An ordinary river, an ordinary bank, an ordinary landscape. But still, what did the author want to depict, what visual means did he use? To begin with, I looked at the metadata of the image, and you can see these tools (or rather, tools) to the right of the photo.

Photo analysis

Camera: Fujifilm FinePix S7000
Matrix: 1/1.7 CCD
Lens: 35-210mm f/2.8-3.1

Photo parameters:
Focal length: 7.8 mm (35 mm EGF)
Aperture: f4.5
Shutter speed: 1/1000 s.
ISO: 200

Exposure metering: matrix
Lighting: daylight
Flash: Off

Now I enlarged and examined the photograph carefully. I also advise you to increase it in any case.
Regarding purely technical quality, the complaints are as follows. The photo is normally exposed, but the focus is on the foreground (grass), so everything else is out of focus. Usually for landscapes they make a large depth of field (for this they cover the aperture). This is not done here (although the shutter speed of 1/1000 sec. made it possible to clamp the aperture much more than f4.5 - if I read the metadata of the image file correctly). But the light sensitivity cannot be reduced here: as the owner of the camera correctly corrected me, ISO-200 in this camera is minimal.

Further. This landscape has 3 plans: near (grass), middle (water with reflections of trees), and far (park). But for some reason only the grass in front is in focus. In general, this is how a landscape is photographed when there is some main subject in the foreground. Here it could be a fisherman, or a moored boat with its bow pulled ashore. Then focusing on the close-up justified itself. But since the main subject is still missing (which is already a disadvantage), in this photo, not only the grass should attract the attention of the viewer. But the sharpness barely reaches the middle of the river, not reaching the park on the opposite bank.

In the photo (on the left side of the park) some kind of building is visible. Either a bus stop, or a painted house, or a barn - you can’t make out. Is this the author’s intention, or an object accidentally caught in the frame? What and why is shown to the viewer, what thoughts or emotions should he have while watching? It’s not clear... Upon further correspondence, it turned out that this is... a swimming pool for walruses :)

However, such an unexpected turn could serve as an excellent plot for another time of year, and, of course, with the characters in the frame!

What are the creative achievements of photography?

This photograph can be a documentary depiction of the area and have undoubted personal value for the author of the photograph.

All of the above comes from personal experience, understanding and taste. If the criticism falls outside the framework of generally accepted opinion, I apologize... It’s easy to sit on the couch and zoom in on the picture on the monitor to look for flaws, but there, by the river, anyone could get confused. I express my gratitude to the author of the photograph, Tatyana Parfyonova from Moscow, for providing the photograph for educational purposes.

You should not send me dozens of highly artistic photographs from your albums. It’s better to take one of them and look carefully, as if from the outside. This is your photograph, your idea and photography. What was the lighting and shooting conditions like? What did you want to depict? What happened? and was there a way to improve? You can easily learn to do the above analysis of pictures yourself.

Analysis and creative vision of the world are the foundations of photography. If this happens before you press the shutter button (and not after) - this is the basis for interesting photography!

What is it interesting photo? No one will tell you the exact wording. An interesting shot is an interesting shot.

There is the concept of an interesting book, an interesting film, interesting game, interesting acquaintance. Moreover, out of 100 people, a certain number will certainly say that this film (photo, book) is interesting, others will say the opposite, and the rest will say that you can watch it once, but no more.

There are also photographs that are interesting and understandable only to a narrow circle of people. For example, a photo of friends that may be of interest only to them and no one else. There are photographs that simply copy the surrounding reality. This problem can be offset by the beauty of the depicted place. In addition, there are photographs that are interesting and understandable only to a narrow circle of experts. There are no clear and precise criteria for “interestingness”. You can remember some pictures for the rest of your life, but you will forget a lot of others immediately after 2 seconds. viewing.

And yet there are things that make you think or evoke emotions. This is where most people can clearly tell whether they are interested or not. Yes, yes, you understood me correctly, I’m not talking about nudity :) But it’s easier for me to show a couple of pictures than to describe the essence of the phenomena. Let's look at 2 examples. The following photographs actually show the same thing: The Bronze Horseman is a monument to Peter I in St. Petersburg. I reminded you for those who think that this is a horseman on the attack. With sincere respect for national culture :)

Photo of the Bronze Horseman.

1. 2.

The technical quality of these images is approximately the same. They are normally exposed, fairly sharp, etc. But one of these photos looks more interesting, doesn't it? One of them depicts just a monument, and the other shows the connection between times. Did you notice that I didn’t even indicate which one :)

Below we see two more photographs, which show almost the same thing, even the angle is the same. But on one of them we see some kind of dull glass figure against a colorful background, but completely incomprehensible to perception, and we wonder: what is depicted?

Two photos.

3. 4.

Yellow elephant rat? Subject photography? A sample of products from the Gus-Khrustalny glass factory? An unsuccessful self-portrait of the author? What is depicted and what they wanted to convey to the viewer in terms of meaning or genre is completely unclear.

But in another photograph the viewer, who, of course, is not devoid of a certain amount of imagination, can easily see the artist entering the stage in the rays of light - in front of the audience frozen in the semi-darkness of the hall, waiting for his performance! And here it is unnecessary to say what kind of photograph we are talking about, since it is obvious.

Here are more pictures from the find 2 differences series. They have nothing to do with the topic “how to take photographs correctly the first time,” since we are talking about retouching, with the help of which possible defects in the image are eliminated (random dots, spots, pimples on the skin, freckles, etc.), and in this case you see for yourself what  :-)

Lions and doves.

5. 6.

Read more about retouching in my photo dictionary. In advanced graphic editors (Photoshop, Gimp, etc.), such retouching (correcting an area in a digital image by filling it with textures from other areas) is most conveniently done with the “stamp” tool, having previously activated the cloning area with the “Alt” key in Photoshop (or “ Ctrl" in Gimp) - unless other keys are specified). Those who don’t want to master the editor can wipe off the stains with a wet cloth and soap, and then call the pigeons and take pictures :-)

However, I’m not sure that a set of a broom, bucket, rags and soap will be the best accessory for your camera. Imagine such a set in a photo store!

I won’t tell you which photograph of pigeons is more interesting—the original or the retouched one. In the end, there is no arguing about tastes  :-) Well, how can you, I am not mocking, society has long been pushing the fashion of an alternative view of art :-)

The aperture here was set to f9.5 so that the lions would not blur into the background at all. Forget about it and about retouching too. See lions and doves, look for harmony in the world around you.

And the last couple. Here we see photographs that photographers usually take for calendars with views of cities, memorable places, or architectural ensembles. And where newcomers usually like to pose, so that they can then proudly write “Fedya was here,” which is highly not recommended, so as not to completely and irrevocably ruin the photo :)

Gatchina Palace.

7. 8.

The ability of a photographer (or camera?!) to set the required shutter speed and aperture is sometimes completely insufficient to make a beautiful landscape look more advantageous. A different shooting point and an unexpected angle can turn the palace by the lake into a real artistic postcard! Have you noticed that it is not indicated here which photo looks more interesting? :)
Since I receive a lot of letters, but no one has yet asked this question, we will assume that the photography textbook is fulfilling its modest role.

A direct continuation of this tutorial is the page

For those who have studied the basics of photography and mastered this small tutorial, I advise you to visit the rest of the pages of the site (menu below), and if you have made great progress, and my materials seem primitive (or they are simply not enough) - here are useful links to others -

If you have a desire, improve yourself.

Yes, and good luck with your photos!